← ANS-C01·Amazon Web Services

Question 695 of 1,705

Network Security, Compliance and Governance →hardMultiple ChoiceObjective-mapped

ANS-C01 Network Security, Compliance and Governance Practice Question

This ANS-C01 practice question tests your understanding of network security, compliance and governance. The scenario asks you to isolate a root cause — eliminate options that address a different problem before choosing. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

A company has a VPC with CIDR 10.0.0.0/16. They have public subnets (10.0.1.0/24, 10.0.2.0/24) and private subnets (10.0.3.0/24, 10.0.4.0/24) in two Availability Zones. An Internet Gateway is attached to the VPC, and a NAT Gateway is in public subnet 10.0.1.0/24. The private subnets route 0.0.0.0/0 to the NAT Gateway. The security team notices that instances in private subnet 10.0.3.0/24 can reach the internet, but instances in private subnet 10.0.4.0/24 cannot. Both private subnets have the same route table configuration. The network ACLs for both private subnets are set to allow all inbound and outbound traffic. What is the most likely cause of the issue?

Clue words in this question

Noticing these words before you look at the options changes how you read each choice.

Clue: "most likely"
Why it matters: Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.

A
The route table for the public subnet 10.0.1.0/24 does not have a route to the Internet Gateway.
The NAT Gateway needs a route to the Internet Gateway through its subnet's route table.
B
The security group on the instances in private subnet 10.0.4.0/24 is blocking outbound traffic.
Why wrong: Security groups would affect both subnets similarly if applied.
C
The network ACL for private subnet 10.0.4.0/24 is blocking outbound traffic.
Why wrong: Network ACLs are set to allow all traffic.
D
The route table for private subnet 10.0.4.0/24 does not have a route to the NAT Gateway.
Why wrong: Both private subnets share the same route table, so they have the same route.

Full breakdown with real-world context →

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

✓

The route table for the public subnet 10.0.1.0/24 does not have a route to the Internet Gateway.

The correct answer is A. The NAT Gateway is in the public subnet 10.0.1.0/24. For the NAT Gateway to reach the internet, the route table associated with that public subnet must have a default route (0.0.0.0/0) pointing to the Internet Gateway. Without this route, the NAT Gateway cannot forward traffic from private subnets to the internet. Since both private subnets have the same route table configuration pointing to the NAT Gateway, the issue is isolated to the NAT Gateway's inability to reach the internet due to the missing route in the public subnet's route table. Options B, C, and D are incorrect: security groups and network ACLs are configured to allow traffic, and the private subnet route tables are correctly set to route to the NAT Gateway.

Key principle: Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.

Answer analysis

Option-by-option breakdown

For each option: why learners choose it and why it is or isn't the right answer here.

✓
The route table for the public subnet 10.0.1.0/24 does not have a route to the Internet Gateway.
Why this is correct
The NAT Gateway needs a route to the Internet Gateway through its subnet's route table.
Clue confirmation
The clue word "most likely" in the question point toward this answer.
Related concept
CIDR notation defines the prefix length.
✗
The security group on the instances in private subnet 10.0.4.0/24 is blocking outbound traffic.
Why it's wrong here
Security groups would affect both subnets similarly if applied.
✗
The network ACL for private subnet 10.0.4.0/24 is blocking outbound traffic.
Why it's wrong here
Network ACLs are set to allow all traffic.
✗
The route table for private subnet 10.0.4.0/24 does not have a route to the NAT Gateway.
Why it's wrong here
Both private subnets share the same route table, so they have the same route.

Common exam traps

Common exam trap: usable hosts are not the same as total addresses

Subnetting questions often tempt you into counting all addresses. In normal IPv4 subnets, the network and broadcast addresses are not usable host addresses.

Trap categories for this question

Similar concept trap
Security groups would affect both subnets similarly if applied.

Detailed technical explanation

How to think about this question

Subnetting questions test whether you can identify the network, broadcast address, usable range, mask and correct subnet. Slow down enough to calculate the block size correctly.

KKey Concepts to Remember

CIDR notation defines the prefix length.
Block size helps identify subnet boundaries.
Network and broadcast addresses are not usable hosts in normal IPv4 subnets.
The required host count determines the smallest suitable subnet.

TExam Day Tips

Write the block size before choosing the subnet.
Check whether the question asks for hosts, subnets or a specific address range.
Do not confuse /24, /25, /26 and /27 host counts.

Key takeaway

Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.

Real-world example

How this comes up in practice

A company's IT admin needs to give a contractor read-only access to production logs without sharing account credentials. Using role-based access control (RBAC) and temporary scoped permissions — not a permanent shared password — is the correct pattern. Questions like this test whether you can apply least-privilege access across cloud identity services.

Visual reference

What to study next

Got this wrong? Here's your next step.

Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related ANS-C01 subnetting questions on CIDR, address ranges, and subnet selection.

Related ANS-C01 practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Network Management and Operations practice questions

Practise ANS-C01 questions linked to Network Management and Operations.

Network Security, Compliance and Governance practice questions

Practise ANS-C01 questions linked to Network Security, Compliance and Governance.

Network Design practice questions

Practise ANS-C01 questions linked to Network Design.

Network Implementation practice questions

Practise ANS-C01 questions linked to Network Implementation.

ANS-C01 fundamentals practice questions

Practise ANS-C01 questions linked to ANS-C01 fundamentals.

ANS-C01 scenario practice questions

Practise ANS-C01 questions linked to ANS-C01 scenario.

ANS-C01 troubleshooting practice questions

Practise ANS-C01 questions linked to ANS-C01 troubleshooting.

Practice this exam

Start a free ANS-C01 practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

10 questions 20 questions 30 questions 50 questions Timed 30

ANS-C01 practice-test guide →Study guide →Browse all practice tests

FAQ

Questions learners often ask

What does this ANS-C01 question test?

Network Security, Compliance and Governance — This question tests Network Security, Compliance and Governance — CIDR notation defines the prefix length..

What is the correct answer to this question?

The correct answer is: The route table for the public subnet 10.0.1.0/24 does not have a route to the Internet Gateway. — The correct answer is A. The NAT Gateway is in the public subnet 10.0.1.0/24. For the NAT Gateway to reach the internet, the route table associated with that public subnet must have a default route (0.0.0.0/0) pointing to the Internet Gateway. Without this route, the NAT Gateway cannot forward traffic from private subnets to the internet. Since both private subnets have the same route table configuration pointing to the NAT Gateway, the issue is isolated to the NAT Gateway's inability to reach the internet due to the missing route in the public subnet's route table. Options B, C, and D are incorrect: security groups and network ACLs are configured to allow traffic, and the private subnet route tables are correctly set to route to the NAT Gateway.

What should I do if I get this ANS-C01 question wrong?

Are there clue words in this question I should notice?

Yes — watch for: "most likely". Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.

What is the key concept behind this question?

CIDR notation defines the prefix length.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Keep practising

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

This ANS-C01 practice question is part of Courseiva's free Amazon Web Services certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the ANS-C01 exam.