- A
VPC Gateway Endpoint
Why wrong: Gateway endpoints support S3 and DynamoDB only, not general internet access.
- B
Internet Gateway
Why wrong: Internet Gateway allows inbound traffic; not suitable for private subnets.
- C
NAT Gateway
Why wrong: NAT Gateway does not support IPv6.
- D
Egress-Only Internet Gateway
Egress-only internet gateway provides outbound-only IPv6 access.
Quick Answer
The answer is the egress-only internet gateway. This is the correct choice because an egress-only internet gateway is a horizontally scaled, highly available AWS component that enables outbound IPv6 traffic from instances in a private subnet to the internet, while explicitly preventing any unsolicited inbound IPv6 connections. Unlike a standard NAT gateway, which works only for IPv4, the egress-only internet gateway is purpose-built for IPv6, allowing private subnet instances to initiate outbound communication—such as fetching updates or sending data—without exposing them to incoming traffic. On the AWS Certified Advanced Networking Specialty ANS-C01 exam, this concept tests your understanding of IPv6 routing and security boundaries; a common trap is confusing the egress-only internet gateway with a NAT gateway or an internet gateway, but remember that NAT gateways do not support IPv6, and an internet gateway would allow bidirectional traffic. For a quick memory tip: think of it as a “one-way door” for IPv6—outbound only, no inbound allowed.
ANS-C01 Network Implementation Practice Question
This ANS-C01 practice question tests your understanding of network implementation. Match the stated requirement to the specific cloud service, access model, or configuration option — many options are valid in isolation but not for this scenario. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A company has a VPC with an IPv6 CIDR and wants to provide internet access to instances in a private subnet using IPv6. Which AWS service should be used?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Egress-Only Internet Gateway
An egress-only internet gateway allows outbound IPv6 traffic from private subnets but blocks inbound traffic.
Key principle: Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
Common exam traps
Common exam trap: usable hosts are not the same as total addresses
Subnetting questions often tempt you into counting all addresses. In normal IPv4 subnets, the network and broadcast addresses are not usable host addresses.
Detailed technical explanation
How to think about this question
Subnetting questions test whether you can identify the network, broadcast address, usable range, mask and correct subnet. Slow down enough to calculate the block size correctly.
KKey Concepts to Remember
- CIDR notation defines the prefix length.
- Block size helps identify subnet boundaries.
- Network and broadcast addresses are not usable hosts in normal IPv4 subnets.
- The required host count determines the smallest suitable subnet.
TExam Day Tips
- Write the block size before choosing the subnet.
- Check whether the question asks for hosts, subnets or a specific address range.
- Do not confuse /24, /25, /26 and /27 host counts.
Key takeaway
Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.
Real-world example
How this comes up in practice
A company's IT admin needs to give a contractor read-only access to production logs without sharing account credentials. Using role-based access control (RBAC) and temporary scoped permissions — not a permanent shared password — is the correct pattern. Questions like this test whether you can apply least-privilege access across cloud identity services.
What to study next
Got this wrong? Here's your next step.
Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related ANS-C01 subnetting questions on CIDR, address ranges, and subnet selection.
- →
Network Implementation — study guide chapter
Learn the concepts, then practise the questions
- →
Network Implementation practice questions
Targeted practice on this topic area only
- →
All ANS-C01 questions
1,705 questions across all exam domains
- →
AWS Certified Advanced Networking Specialty ANS-C01 study guide
Full concept coverage aligned to exam objectives
- →
ANS-C01 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related ANS-C01 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Network Management and Operations practice questions
Practise ANS-C01 questions linked to Network Management and Operations.
Network Security, Compliance and Governance practice questions
Practise ANS-C01 questions linked to Network Security, Compliance and Governance.
Network Design practice questions
Practise ANS-C01 questions linked to Network Design.
Network Implementation practice questions
Practise ANS-C01 questions linked to Network Implementation.
ANS-C01 fundamentals practice questions
Practise ANS-C01 questions linked to ANS-C01 fundamentals.
ANS-C01 scenario practice questions
Practise ANS-C01 questions linked to ANS-C01 scenario.
ANS-C01 troubleshooting practice questions
Practise ANS-C01 questions linked to ANS-C01 troubleshooting.
Practice this exam
Start a free ANS-C01 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this ANS-C01 question test?
Network Implementation — This question tests Network Implementation — CIDR notation defines the prefix length..
What is the correct answer to this question?
The correct answer is: Egress-Only Internet Gateway — An egress-only internet gateway allows outbound IPv6 traffic from private subnets but blocks inbound traffic.
What should I do if I get this ANS-C01 question wrong?
Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related ANS-C01 subnetting questions on CIDR, address ranges, and subnet selection.
What is the key concept behind this question?
CIDR notation defines the prefix length.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 20, 2026
This ANS-C01 practice question is part of Courseiva's free Amazon Web Services certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the ANS-C01 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.