Question 1,069 of 1,705
Network Security, Compliance and GovernancehardMultiple ChoiceObjective-mapped

ANS-C01 Network Security, Compliance and Governance Practice Question

This ANS-C01 practice question tests your understanding of network security, compliance and governance. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

A company needs to meet compliance requirements that mandate encryption of all data in transit between EC2 instances in the same VPC. The instances are in different subnets and communicate using TCP port 443. Which solution should a network engineer implement?

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

Configure the application to use TLS for communication.

Option A is correct because configuring the application to use TLS ensures end-to-end encryption of data in transit between EC2 instances, meeting the compliance requirement. Option B is incorrect because VPC Flow Logs only capture metadata about traffic (e.g., IP addresses, ports, protocols) and do not encrypt the data itself. Option C is incorrect because AWS Certificate Manager (ACM) provisions certificates but does not automatically encrypt traffic; the application must use those certificates within a TLS configuration. Option D is incorrect because deploying a VPN connection between instances within the same VPC adds unnecessary complexity and does not automatically encrypt application-layer traffic.

Key principle: Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.

Answer analysis

Option-by-option breakdown

For each option: why learners choose it and why it is or isn't the right answer here.

  • Configure the application to use TLS for communication.

    Why this is correct

    This ensures encryption in transit as required.

    Related concept

    CIDR notation defines the prefix length.

  • Enable VPC Flow Logs to monitor for unencrypted traffic.

    Why it's wrong here

    Flow Logs do not encrypt traffic; they only log metadata.

  • Use AWS Certificate Manager (ACM) to provision certificates and enable encryption automatically.

    Why it's wrong here

    ACM provisions certificates but does not automatically encrypt traffic; application must use TLS.

  • Deploy a VPN connection between the instances.

    Why it's wrong here

    Overkill for same-VPC traffic; adds complexity.

Common exam traps

Common exam trap: usable hosts are not the same as total addresses

Subnetting questions often tempt you into counting all addresses. In normal IPv4 subnets, the network and broadcast addresses are not usable host addresses.

Detailed technical explanation

How to think about this question

Subnetting questions test whether you can identify the network, broadcast address, usable range, mask and correct subnet. Slow down enough to calculate the block size correctly.

KKey Concepts to Remember

  • CIDR notation defines the prefix length.
  • Block size helps identify subnet boundaries.
  • Network and broadcast addresses are not usable hosts in normal IPv4 subnets.
  • The required host count determines the smallest suitable subnet.

TExam Day Tips

  • Write the block size before choosing the subnet.
  • Check whether the question asks for hosts, subnets or a specific address range.
  • Do not confuse /24, /25, /26 and /27 host counts.

Key takeaway

Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.

Real-world example

How this comes up in practice

A healthcare organisation deploys an application with a public-facing web tier and a private database tier. The database subnet has no public IP and only accepts connections from the web tier's security group. Questions like this test whether you can design cloud network isolation using VNets/VPCs, subnets, and security group rules.

Visual reference

192.168.1.0 /24 256 addresses (254 usable) 192.168.1.0 /25 Subnet A 128 addr (126 usable) 192.168.1.128 /25 Subnet B 128 addr (126 usable) Borrowing 1 bit from host portion creates 2 subnets (/25)

Quick reference

VPN Protocol Comparison

ProtocolPortEncryptionAuthenticationUse Case
IKEv2 / IPsecUDP 500 / 4500AES-256Certificates / PSKSite-to-site & remote access
SSL / TLS VPNTCP 443TLS 1.3Certificates / MFAClientless remote access
L2TP / IPsecUDP 1701AES (IPsec)PSK / CertificatesLegacy remote access
WireGuardUDP 51820ChaCha20Public keysModern high-performance VPN
PPTPTCP 1723MPPE (weak)MS-CHAPv2Legacy — avoid in production

PPTP is considered insecure. IKEv2/IPsec and SSL VPN are the current recommended options.

What to study next

Got this wrong? Here's your next step.

Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related ANS-C01 subnetting questions on CIDR, address ranges, and subnet selection.

Related practice questions

Related ANS-C01 practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Practice this exam

Start a free ANS-C01 practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

FAQ

Questions learners often ask

What does this ANS-C01 question test?

Network Security, Compliance and Governance — This question tests Network Security, Compliance and Governance — CIDR notation defines the prefix length..

What is the correct answer to this question?

The correct answer is: Configure the application to use TLS for communication. — Option A is correct because configuring the application to use TLS ensures end-to-end encryption of data in transit between EC2 instances, meeting the compliance requirement. Option B is incorrect because VPC Flow Logs only capture metadata about traffic (e.g., IP addresses, ports, protocols) and do not encrypt the data itself. Option C is incorrect because AWS Certificate Manager (ACM) provisions certificates but does not automatically encrypt traffic; the application must use those certificates within a TLS configuration. Option D is incorrect because deploying a VPN connection between instances within the same VPC adds unnecessary complexity and does not automatically encrypt application-layer traffic.

What should I do if I get this ANS-C01 question wrong?

Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related ANS-C01 subnetting questions on CIDR, address ranges, and subnet selection.

What is the key concept behind this question?

CIDR notation defines the prefix length.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Keep practising

More ANS-C01 practice questions

Last reviewed: Jun 20, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This ANS-C01 practice question is part of Courseiva's free Amazon Web Services certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the ANS-C01 exam.