- A
Use the same CIDR block and rely on NAT
Why wrong: Overlap will cause routing issues.
- B
Use a different RFC 1918 CIDR block for the VPC
Avoids overlap.
- C
Use a smaller subnet within the same 10.0.0.0/8 range
Why wrong: Still overlaps.
- D
Use a public IP range for the VPC
Why wrong: Public IPs are not recommended for private VPCs.
Question 765 of 1,705
ANS-C01 Network Design Practice Question
This ANS-C01 practice question tests your understanding of network design. Match the stated requirement to the specific cloud service, access model, or configuration option — many options are valid in isolation but not for this scenario. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A company is designing a network for a new VPC. They want to ensure that the VPC can connect to an on-premises data center via a site-to-site VPN. The on-premises network uses a CIDR block of 10.0.0.0/8. The VPC will use a CIDR block of 10.0.0.0/16. The network engineer is concerned about overlapping IP addresses. What is the best way to avoid IP address overlap?
Clue words in this question
Noticing these words before you look at the options changes how you read each choice.
Clue:
"best"Why it matters: Signals that multiple options may be partially correct. Choose the option that most directly solves the exact problem described, not the one that sounds most complete.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Use a different RFC 1918 CIDR block for the VPC
Option B is correct because using a different RFC 1918 CIDR block (e.g., 172.16.0.0/12 or 192.168.0.0/16) for the VPC completely avoids IP address overlap with the on-premises 10.0.0.0/8 network. Overlapping CIDR blocks (both using 10.0.0.0/8) would prevent successful route propagation and cause asymmetric routing or connectivity failures in the site-to-site VPN. NAT can mitigate overlap but adds complexity and is not the 'best' design choice when a non-overlapping private range is available.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
Use the same CIDR block and rely on NAT
Why it's wrong here
Overlap will cause routing issues.
- ✓
Use a different RFC 1918 CIDR block for the VPC
Why this is correct
Avoids overlap.
Clue confirmation
The clue word "best" in the question point toward this answer.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
Use a smaller subnet within the same 10.0.0.0/8 range
Why it's wrong here
Still overlaps.
- ✗
Use a public IP range for the VPC
Why it's wrong here
Public IPs are not recommended for private VPCs.
Common exam traps
Common exam trap: answer the scenario, not the keyword
AWS often tests the misconception that NAT can always solve IP overlap issues, but the best practice is to design non-overlapping private IP spaces from the start to avoid complexity and routing failures.
Detailed technical explanation
How to think about this question
Under the hood, AWS site-to-site VPN uses BGP dynamic routing or static routes; overlapping CIDRs cause the VPN connection to reject or ignore routes that conflict with the VPC's main route table, leading to unreachable destinations. In a real-world scenario, if both sides use 10.0.0.0/8, traffic destined for the VPC's 10.0.1.0/24 might be sent to the on-premises network instead, breaking connectivity. AWS recommends using unique RFC 1918 ranges per VPC and on-premises to ensure proper route propagation and avoid NAT overhead.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
TExam Day Tips
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A healthcare organisation deploys an application with a public-facing web tier and a private database tier. The database subnet has no public IP and only accepts connections from the web tier's security group. Questions like this test whether you can design cloud network isolation using VNets/VPCs, subnets, and security group rules.
Visual reference
Quick reference
Asymmetric Encryption Algorithm Comparison
| Algorithm | Key Exchange | Signatures | Equivalent Security Key | Notes |
|---|---|---|---|---|
| RSA-3072 | Yes | Yes | 128-bit | Widely deployed; slow for bulk data |
| ECDSA P-256 | No | Yes | 128-bit | Fast signatures; standard TLS certs |
| ECDH / ECDHE | Yes | No | 128-bit | Perfect forward secrecy in TLS 1.3 |
| DH / DHE | Yes | No | 128-bit (3072-bit key) | Replaced by ECDHE in modern TLS |
| Ed25519 | No | Yes | ~128-bit | SSH keys, modern PKI |
What to study next
Got this wrong? Here's your next step.
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
- →
Network Design — study guide chapter
Learn the concepts, then practise the questions
- →
Network Design practice questions
Targeted practice on this topic area only
- →
All ANS-C01 questions
1,705 questions across all exam domains
- →
AWS Certified Advanced Networking Specialty ANS-C01 study guide
Full concept coverage aligned to exam objectives
- →
ANS-C01 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related ANS-C01 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Network Management and Operations practice questions
Practise ANS-C01 questions linked to Network Management and Operations.
Network Security, Compliance and Governance practice questions
Practise ANS-C01 questions linked to Network Security, Compliance and Governance.
Network Design practice questions
Practise ANS-C01 questions linked to Network Design.
Network Implementation practice questions
Practise ANS-C01 questions linked to Network Implementation.
ANS-C01 fundamentals practice questions
Practise ANS-C01 questions linked to ANS-C01 fundamentals.
ANS-C01 scenario practice questions
Practise ANS-C01 questions linked to ANS-C01 scenario.
ANS-C01 troubleshooting practice questions
Practise ANS-C01 questions linked to ANS-C01 troubleshooting.
Practice this exam
Start a free ANS-C01 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this ANS-C01 question test?
Network Design — This question tests Network Design — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: Use a different RFC 1918 CIDR block for the VPC — Option B is correct because using a different RFC 1918 CIDR block (e.g., 172.16.0.0/12 or 192.168.0.0/16) for the VPC completely avoids IP address overlap with the on-premises 10.0.0.0/8 network. Overlapping CIDR blocks (both using 10.0.0.0/8) would prevent successful route propagation and cause asymmetric routing or connectivity failures in the site-to-site VPN. NAT can mitigate overlap but adds complexity and is not the 'best' design choice when a non-overlapping private range is available.
What should I do if I get this ANS-C01 question wrong?
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
Are there clue words in this question I should notice?
Yes — watch for: "best". Signals that multiple options may be partially correct. Choose the option that most directly solves the exact problem described, not the one that sounds most complete.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More ANS-C01 practice questions
- A financial services company has a VPC with a public subnet and a private subnet. EC2 instances in the private subnet ne…
- A company is designing a network security architecture for a multi-account environment using AWS Transit Gateway. The se…
- A company is using AWS Direct Connect to connect its on-premises network to AWS. The company wants to encrypt all traffi…
- A company uses AWS Transit Gateway to connect multiple VPCs and on-premises networks via AWS Site-to-Site VPN. The secur…
- A company runs a web application on EC2 instances behind an Application Load Balancer (ALB). The application must be acc…
- A global e-commerce company uses a hub-and-spoke network topology with a transit VPC in us-east-1. Each spoke VPC has an…
Last reviewed: Jun 30, 2026
This ANS-C01 practice question is part of Courseiva's free Amazon Web Services certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the ANS-C01 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.