Question 1,010 of 1,705
Network Security, Compliance and GovernancehardMultiple SelectObjective-mapped

ANS-C01 Network Security, Compliance and Governance Practice Question

This ANS-C01 practice question tests your understanding of network security, compliance and governance. Match the stated requirement to the specific cloud service, access model, or configuration option — many options are valid in isolation but not for this scenario. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

A company needs to ensure that all outbound traffic from a VPC goes through a centralized inspection appliance in a different VPC. Which TWO actions must be taken to achieve this?

Question 1hardmulti select
Full question →

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

Use AWS Transit Gateway with appropriate route tables to direct traffic to the inspection VPC.

Option A is correct: Transit Gateway with route tables can direct traffic to the inspection VPC. Option C is correct: The inspection VPC must have routes to forward traffic back. Option B is wrong: VPC peering does not support transitive routing. Option D is wrong: Direct Connect is for on-premises. Option E is wrong: VPC endpoints do not route general internet traffic.

Key principle: NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.

Answer analysis

Option-by-option breakdown

For each option: why learners choose it and why it is or isn't the right answer here.

  • Deploy VPC endpoints for all AWS services used.

    Why it's wrong here

    VPC endpoints provide private access to AWS services, not internet routing.

  • Use AWS Direct Connect Gateway to route traffic between VPCs.

    Why it's wrong here

    Direct Connect Gateway is for on-premises connectivity.

  • Create VPC peering connections between all VPCs.

    Why it's wrong here

    VPC peering does not support transitive routing.

  • Use AWS Transit Gateway with appropriate route tables to direct traffic to the inspection VPC.

    Why this is correct

    Transit Gateway supports transitive routing through route tables.

    Related concept

    Static NAT maps one inside address to one outside address.

  • Configure the inspection VPC to forward traffic to its destination after inspection.

    Why this is correct

    The inspection VPC must route traffic back to the Transit Gateway.

    Related concept

    Static NAT maps one inside address to one outside address.

Common exam traps

Common exam trap: NAT rules depend on direction and matching traffic

NAT is not only about the public address. The inside/outside interface roles and the ACL or rule that matches traffic are just as important.

Detailed technical explanation

How to think about this question

NAT questions usually test address translation, overload/PAT behaviour, static mappings and whether the right traffic is being translated. Read the interface direction and address terms carefully.

KKey Concepts to Remember

  • Static NAT maps one inside address to one outside address.
  • PAT allows many inside hosts to share one public address using ports.
  • Inside local and inside global describe the private and translated addresses.
  • NAT ACLs identify traffic for translation, not always security filtering.

TExam Day Tips

  • Identify inside and outside interfaces first.
  • Check whether the scenario needs static NAT, dynamic NAT or PAT.
  • Do not confuse NAT matching ACLs with normal packet-filtering intent.

Key takeaway

NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.

Real-world example

How this comes up in practice

A healthcare organisation deploys an application with a public-facing web tier and a private database tier. The database subnet has no public IP and only accepts connections from the web tier's security group. Questions like this test whether you can design cloud network isolation using VNets/VPCs, subnets, and security group rules.

What to study next

Got this wrong? Here's your next step.

Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related ANS-C01 NAT questions on configuration and troubleshooting.

Related practice questions

Related ANS-C01 practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Practice this exam

Start a free ANS-C01 practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

FAQ

Questions learners often ask

What does this ANS-C01 question test?

Network Security, Compliance and Governance — This question tests Network Security, Compliance and Governance — Static NAT maps one inside address to one outside address..

What is the correct answer to this question?

The correct answer is: Use AWS Transit Gateway with appropriate route tables to direct traffic to the inspection VPC. — Option A is correct: Transit Gateway with route tables can direct traffic to the inspection VPC. Option C is correct: The inspection VPC must have routes to forward traffic back. Option B is wrong: VPC peering does not support transitive routing. Option D is wrong: Direct Connect is for on-premises. Option E is wrong: VPC endpoints do not route general internet traffic.

What should I do if I get this ANS-C01 question wrong?

Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related ANS-C01 NAT questions on configuration and troubleshooting.

What is the key concept behind this question?

Static NAT maps one inside address to one outside address.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Keep practising

More ANS-C01 practice questions

Last reviewed: Jun 20, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This ANS-C01 practice question is part of Courseiva's free Amazon Web Services certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the ANS-C01 exam.