PCNSA Device Management and Services — Timed 15 Questions

Question 1

A security administrator notices that a user's traffic is being blocked unexpectedly. The user's IP is 10.1.1.100, and the traffic is destined to a web server at 192.168.2.10. The administrator has already verified that there are no security rules explicitly denying the traffic. Which Log Viewer query should the administrator use to quickly identify the cause?

Accepted Answer

Search Traffic logs with filters for source 10.1.1.100 and destination 192.168.2.10. Traffic logs capture every session that passes through the firewall, including allowed and denied connections. By filtering for the specific source IP (10.1.1.100) and destination IP (192.168.2.10), the administrator can quickly see the exact session details, including the action taken (e.g., deny, drop) and the reason (e.g., no matching rule, application override). This is the most direct method to identify why traffic is being blocked when no explicit deny rule exists.

Answer

Search Threat logs for the destination IP

Answer

Search Config logs for any rule changes

Answer

Search System logs for the user's IP

Question 2

A company wants to deploy a new firewall with a management interface on a separate VLAN to ensure management traffic is isolated from production traffic. Which interface type should be used for management access?

Accepted Answer

MGT (Management) interface. The MGT (Management) interface is a dedicated physical port on Palo Alto Networks firewalls designed specifically for out-of-band management traffic. It operates on a separate routing table and does not participate in production data forwarding, ensuring complete isolation of management traffic from production traffic as required by the scenario.

Answer

HA1 interface

Answer

VLAN interface

Answer

Ethernet 1/1

Question 3

During a firewall upgrade from PAN-OS 9.1 to 10.0, the administrator receives an error that the upgrade cannot proceed because there is a pending commit. The administrator checks the commit status and sees that a commit was initiated but has not completed. What is the best course of action?

Accepted Answer

Run 'commit force yes' from the CLI to force the commit. Option B is correct because the 'commit force yes' command overrides a stuck or incomplete commit by forcing the commit operation to proceed, which clears the pending commit state and allows the upgrade to continue. In PAN-OS, a pending commit blocks administrative operations like upgrades, and forcing the commit is the safest way to resolve this without disrupting the firewall's operational state.

Answer

Reboot the firewall to clear the pending commit

Answer

Wait for the commit to complete automatically

Answer

Cancel the upgrade and restart

Question 4

An administrator needs to generate a report showing all applications used by a specific user group over the past week. Which method is most efficient?

Accepted Answer

Use the ACC (Application Command Center) and filter by user group and time range. The ACC (Application Command Center) is purpose-built for rapid application visibility and analysis. By filtering by user group and time range directly within the ACC, the administrator can instantly see the top applications used by that group without exporting or manually parsing logs, making it the most efficient method for this specific reporting need.

Answer

Export Traffic logs to CSV and analyze in Excel

Answer

Use the Top Applications report in the Reports tab

Answer

Use the Monitor tab's Session Browser with a filter for the user group

Question 5

A network engineer wants to configure a new VLAN interface on a Palo Alto Networks firewall. After creating the VLAN object and assigning it to an Ethernet interface, the VLAN interface remains down. What is the most likely cause?

Accepted Answer

The Ethernet interface is not set to layer 2 mode or the VLAN tag is not allowed. For a VLAN interface to be operational on a Palo Alto Networks firewall, the underlying Ethernet interface must be configured in Layer 2 mode and the specific VLAN tag must be allowed on that interface. If the Ethernet interface remains in Layer 3 mode or the VLAN tag is not included in the allowed list, the VLAN interface will remain administratively down, as it cannot associate with a physical port that is not set to accept VLAN traffic.

Answer

The VLAN interface needs an IP address configured

Answer

The VLAN interface must be assigned to a virtual router

Answer

The firewall needs a commit to apply the changes

Question 6

An organization is deploying a firewall in a high-availability (HA) pair. The administrator wants to ensure that session state is synchronized between the firewalls so that active sessions are not dropped during failover. Which configuration is required?

Accepted Answer

Enable Session Setup and State Synchronization under HA configuration. Option C is correct because session state synchronization (also known as stateful failover) requires enabling both Session Setup and State Synchronization under the HA configuration. This ensures that the active firewall's session table is continuously replicated to the passive firewall, so when a failover occurs, existing sessions are not dropped and can continue without interruption.

Answer

Configure HA1 and HA2 interfaces with appropriate IPs

Answer

Enable Config Sync on the HA General tab

Answer

Configure Path Monitoring to detect link failures

Question 7

A security analyst notices that a legitimate application is being incorrectly identified as a different application by the firewall. What is the best first step to resolve this issue?

Accepted Answer

Verify the application signature in the App-ID database and submit a false-positive report if needed. Option C is correct because the first step in resolving an application misidentification is to verify the application signature in the App-ID database. If the signature is incorrect or missing, submitting a false-positive report allows Palo Alto Networks to update the database, ensuring accurate identification without manual overrides. This aligns with the principle of using the built-in App-ID engine as the primary identification method.

Answer

Reboot the firewall to refresh the application cache

Answer

Disable the application override and use port-based rules

Answer

Create a custom App-ID to override the incorrect identification

Question 8

An administrator needs to back up the firewall configuration before making changes. Which method creates a complete backup that can be restored to the same or a different firewall?

Accepted Answer

Use the 'Device > Setup > Operations > Export named configuration snapshot' and select 'running-config.xml'. Option D is correct because exporting the running-config.xml via 'Device > Setup > Operations > Export named configuration snapshot' creates a complete XML backup of the entire running configuration. This file can be imported and restored to the same or a different firewall of the same model and PAN-OS version, ensuring full recovery of all settings, including network, policy, and object configurations.

Answer

Use the 'Device > Setup > Operations > Save named configuration snapshot' option

Answer

Use the 'Save Candidate Config' option in the GUI

Answer

Use the CLI command 'show config running' and copy the output

Question 9

Which TWO of the following are valid methods to upgrade the PAN-OS version on a Palo Alto Networks firewall?

Accepted Answer

Using the GUI under Device > Dynamic Updates > Software. Option A is correct because the PAN-OS software upgrade can be initiated via the GUI under Device > Dynamic Updates > Software, where administrators can download and install new PAN-OS versions. This is a standard method for upgrading the firewall's operating system through the web interface.

Answer

Using the GUI under Device > Dynamic Updates > Content Updates

Answer

Downloading the image via SCP and using 'load software'

Answer

Using Panorama's 'Software' tab to push an upgrade to the firewall

Question 10

Which THREE of the following are valid steps when configuring a new virtual wire (vwire) on a Palo Alto Networks firewall?

Accepted Answer

Add two or more interfaces as members of the virtual wire. Option A is correct because a virtual wire requires at least two interfaces to be added as members, which allows the firewall to transparently bridge traffic between them without any IP configuration. The virtual wire acts as a Layer 2 bump-in-the-wire, so interfaces are placed into the vwire to forward frames based on MAC addresses, not IP routing.

Answer

Assign an IP address to the virtual wire

Answer

Create a security policy allowing traffic on the virtual wire

Question 11

Which TWO of the following are valid methods to collect a technical support file from a Palo Alto Networks firewall?

Accepted Answer

Using the GUI under Device > Troubleshooting > Generate Tech Support File. Option C is correct because the Palo Alto Networks firewall GUI provides a dedicated path under Device > Troubleshooting > Generate Tech Support File to generate and download a comprehensive technical support file. This file bundles logs, configuration, and system state data essential for troubleshooting.

Answer

Using the CLI command 'save config to tftp'

Answer

Using the GUI under Monitor > Packet Capture

Answer

Using the CLI command 'show tech-support'

Question 12

Refer to the exhibit. The firewall is experiencing performance issues and dropping sessions. Based on the exhibit, what is the most likely cause?

Accepted Answer

Dataplane resources are exhausted. The exhibit shows that the dataplane (DP) utilization is at 100%, which directly indicates that the dataplane resources are exhausted. When the dataplane is fully utilized, the firewall cannot process new sessions or maintain existing ones, leading to session drops and performance issues. This is the most likely cause because the dataplane handles packet forwarding and session setup, and its exhaustion is a common bottleneck in high-throughput environments.

Answer

The firewall has been recently rebooted

Answer

System CPU is too high

Answer

The session limit is being reached

Question 13

Refer to the exhibit. A user at 10.1.1.50 is unable to connect to 192.168.1.100 on TCP port 443. The traffic log shows no entries for that source IP. Which security rule is expected to match this traffic?

Accepted Answer

Rule 1 (Allow-Sales). Option D (Rule 1 – Allow-Sales) is correct because the user at 10.1.1.50 is in the Sales zone, and the destination 192.168.1.100 is in the Servers zone. The traffic log shows no entries, meaning the traffic is being matched and allowed by a rule before it can be logged. Rule 1 explicitly permits traffic from Sales to Servers on TCP port 443, so it matches this interzone traffic and allows it, generating a log entry only if logging is enabled on that rule.

Answer

Interzone-default

Answer

Intrazone-default

Answer

Rule 2 (Allow-HR)

Question 14

A company has two Palo Alto Networks firewalls in an active/passive HA pair (PA-5250) running PAN-OS 10.1. The HA configuration uses dedicated HA1 (control link) and HA2 (data link) interfaces. The network team recently replaced a failed switch that connected the HA1 interfaces. After the switch replacement, the HA pair is not forming. The administrator logs into the active firewall and runs 'show high-availability state' which shows the local state as 'active' and the peer state as 'unknown'. The HA1 interface status shows 'link down'. The administrator checks the physical connections and confirms the cables are connected and the switch ports are up. What is the most likely cause and the best course of action?

Accepted Answer

Verify that the HA1 interfaces are on the same VLAN and can ping each other using the configured HA1 IP addresses. The correct answer is D because the HA1 interfaces must be on the same Layer 2 domain (VLAN) and able to communicate via ICMP to form the control link. The 'link down' status on the HA1 interface, despite physical connectivity, indicates a Layer 2 misconfiguration (e.g., VLAN mismatch or port mode issue) on the replaced switch. Verifying that the HA1 IP addresses can ping each other confirms Layer 3 reachability, which is essential for HA1 heartbeats and state synchronization.

Answer

Ensure that the HA2 interfaces are also connected and configured correctly

Answer

Change the HA2 IP addresses to be on the same subnet as HA1

Answer

Enable HA ping on the HA1 interface to test connectivity

Question 15

A network administrator notices that a specific user behind a PA-820 firewall is unable to reach a critical SaaS application, while other users can access it without issues. The administrator checks the traffic logs and sees the session is being denied. Which step should the administrator take next to identify the root cause?

Accepted Answer

Check the Traffic log with the session's source IP and destination. Option D is correct because the Traffic log already shows the session is denied, and filtering by the specific user's source IP and the destination SaaS application will reveal the exact security policy or rule that is blocking the traffic. This allows the administrator to identify whether the issue is due to a misconfigured policy, an application override, or a user-specific rule, rather than a global or interface-level problem.

Answer

Check the System log for related entries

Answer

Run a packet capture on the ingress interface

Answer

Check the global counters for dropped packets