C100DBA Practice Test 2 — 25 Questions

Question 1

Refer to the exhibit. A developer attempts to run a query using both 'tags' and 'location' in a single $and operation. What is the expected behavior regarding index usage?

Accepted Answer

The optimizer may choose an index intersection plan.. MongoDB can utilize multiple indexes for a single query through an 'index intersection' execution plan. However, the query optimizer decides whether to perform an intersection or use just one index based on cost. For complex queries involving geo-spatial data and arrays, intersection might be less efficient than a single compound index, and the optimizer may choose a collection scan if intersection costs are deemed too high.

Answer

It will always use both indexes simultaneously.

Answer

It will fail because compound indexes are required.

Answer

It will ignore all indexes and scan the collection.

Question 2

An application requires high write throughput for time-series data indexed by a timestamp field. You observe that all incoming data is being routed to a single shard, creating a write hotspot. Which shard key strategy best resolves this performance bottleneck?

Accepted Answer

Apply a hashed index to the timestamp field as the shard key.. Using a hashed shard key distributes documents uniformly across all shards in the cluster regardless of the timestamp value. By hashing the shard key, the balancer ensures that contiguous ranges of data are not sent to the same shard. This strategy is critical in MongoDB sharding to prevent write hotspots and ensure that the disk I/O and CPU utilization are evenly balanced across the entire sharded cluster, effectively scaling write operations horizontally.

Answer

Use the timestamp field as a single-field shard key.

Answer

Implement a range-based shard key using a UUID.

Answer

Increase the number of mongos instances in the cluster.

Question 3

A company stores IoT sensor data with a high ingestion rate. They use a monotonically increasing timestamp as the shard key. What is the most likely performance bottleneck for this cluster?

Accepted Answer

All new inserts will target the shard holding the highest range of values.. Monotonically increasing shard keys like timestamps result in all write operations being directed to a single shard, specifically the one containing the maximum range. This creates a hot shard where the CPU and I/O capacity of one node are exhausted while others remain idle. Understanding write distribution is critical for maintaining high-throughput ingest systems in MongoDB's distributed architecture.

Answer

The balancer will move chunks too frequently, causing network saturation.

Answer

Read operations will fail because the query router cannot locate the data.

Answer

The shard key must be unique, and timestamps often collide in high-volume systems.

Question 4

What is the purpose of the 'write concern' in MongoDB?

Accepted Answer

To define the durability and replication requirements for a write.. Write concern determines the level of acknowledgement requested from the database for write operations. It is a critical setting for balancing performance against data durability. By choosing the right write concern, developers can ensure that their application meets its specific data safety requirements, whether that means waiting for confirmation from a single node or guaranteeing that the write has been replicated across a majority of the cluster nodes.

Answer

To specify which primary node the write should be directed to.

Answer

To encrypt the data being written to the database.

Answer

To automatically compress the data before it reaches the disk.

Question 5

Which TWO of the following are benefits of the MongoDB 'document' model over the traditional 'relational' model?

Accepted Answer

Built-in support for complex, hierarchical data structures.. The document model excels in developer agility and data modeling flexibility. By grouping related data, it optimizes for common access patterns, which enhances read performance by reducing the need for joins. This approach aligns with modern programming paradigms where objects are the primary unit of development, allowing for faster iterations and easier maintenance compared to relational models that require complex schema changes and manual data normalization across multiple tables.

Answer

Requirement for strict normalization of all data.

Answer

Guaranteed consistency through mandatory schema migrations.

Answer

Automatic translation of SQL queries to BSON.

Question 6

An application frequently queries a large collection by 'user_id' and 'status', sorting the results by 'timestamp'. Which index provides the most efficient execution plan?

Accepted Answer

{ user_id: 1, status: 1, timestamp: 1 }. To optimize this query, the ESR (Equality, Sort, Range) rule must be applied. The 'user_id' and 'status' fields are equality filters, while 'timestamp' is used for sorting. An index of {user_id: 1, status: 1, timestamp: 1} allows MongoDB to satisfy the query filters and provide the sort order directly from the index, avoiding a blocking sort operation in memory which is critical for performance on large collections.

Answer

{ timestamp: 1, user_id: 1, status: 1 }

Answer

{ user_id: 1, timestamp: 1, status: 1 }

Answer

{ user_id: 1, status: 1 }

Question 7

Which method should you use to update multiple documents in a collection and insert a new document if no matches are found?

Accepted Answer

db.collection.updateMany({filter}, {update}, {upsert: true}). The updateMany method modifies all documents matching the filter. When combined with the 'upsert' option set to true, it ensures that if no documents match the query criteria, a single new document is created containing the filter and update criteria. This pattern is critical for idempotent data ingestion pipelines where you must guarantee existence of records without performing separate check-then-insert logic, thus preventing race conditions.

Answer

db.collection.updateOne()

Answer

db.collection.replaceOne()

Answer

db.collection.save()

Question 8

Which read preference allows the application to read from the closest member of the replica set to minimize network latency?

Accepted Answer

nearest. The 'nearest' read preference is specifically designed to reduce latency by targeting the node with the lowest network round-trip time. This is highly effective for global deployments where applications are distributed across regions. Understanding read preferences is fundamental for application administration, as it allows developers to influence traffic distribution and resource utilization across the replica set, ensuring the application remains responsive even when the primary node is geographically distant from the client.

Answer

primaryPreferred

Answer

secondary

Answer

secondaryPreferred

Question 9

When performing a findOne operation, what does MongoDB return if no document matches the query criteria?

Accepted Answer

null. The findOne method is designed to return a single document or null. Returning null is the standard way for the driver and shell to indicate that the search criteria did not produce a match. This is important for application control flow, as developers must always verify that a document was actually retrieved before attempting to access its fields to avoid null pointer exceptions in their code.

Answer

An empty document ({})

Answer

An error code

Answer

An empty cursor

Question 10

What is the purpose of the 'OpLog' in a MongoDB Replica Set?

Accepted Answer

It provides a mechanism for asynchronous data replication.. The OpLog (Operations Log) is a capped collection that records all modifications to the data in the database. It is the core component that allows secondary nodes to replicate data from the primary node. By replaying the operations found in the OpLog, secondaries maintain an identical state to the primary. Understanding the OpLog is essential for diagnosing replication lag and ensuring the system is effectively synchronized across all nodes in the cluster.

Answer

It stores user credentials for database authentication.

Answer

It is used for storing index definitions and metadata.

Answer

It acts as a permanent, immutable backup of all data.

Question 11

Which member type in a MongoDB replica set is best suited for a geographically distant data center to provide read-only access without influencing elections?

Accepted Answer

Priority 0 Secondary. A priority 0 secondary is ideal for this scenario. By setting the priority to zero, the node is ineligible to become primary, preventing it from participating in elections. This is critical for nodes in remote locations where high latency could disrupt election timing or cause unnecessary re-elections, while still providing low-latency read access to users in that specific geographical region.

Answer

Arbiter

Answer

Hidden Member

Answer

Delayed Secondary

Question 12

What is the consequence of having a replica set with only two nodes and no arbiter?

Accepted Answer

The replica set will be unable to elect a primary if one node fails.. A replica set requires a majority of nodes to elect a primary. In a two-node set, a failure of one node makes it impossible to reach a majority, as one out of two is not greater than half. This design limitation is critical because it leads to the loss of a primary and the inability to elect a new one, resulting in a read-only database and complete outage for write operations.

Answer

The set will automatically double the voting power of the primary.

Answer

The replica set will function normally, but writes will be slow.

Answer

The primary will become read-only while the secondary remains idle.

Question 13

Which operator would you use to remove an element from an array field in a document?

Accepted Answer

$pull. The $pull operator is the primary tool for removing items from arrays based on a specified query condition. It is highly effective because it allows you to remove one or many matching elements in a single operation without needing to pull the entire document into application memory, modify the array, and push it back. This promotes efficient resource usage and data consistency.

Answer

$remove

Answer

$pop

Answer

$unset

Question 14

Refer to the exhibit. What is the primary function of the node with _id 2 in this replica set?

Accepted Answer

It provides a vote during elections to help maintain a majority.. An arbiter exists solely to participate in elections and break ties. It does not replicate data or serve read requests, making it a low-resource way to achieve a majority vote in a set. This is crucial for environments where a full-data secondary is cost-prohibitive but high availability is still required to maintain quorum during network partitions.

Answer

It stores a copy of the data and can serve read queries.

Answer

It performs automatic failover by hosting a redundant copy of the oplog.

Answer

It acts as a load balancer for incoming read requests.

Question 15

Refer to the exhibit. Which MongoDB philosophy is represented by this document structure?

Accepted Answer

Data locality for optimized retrieval patterns.. This document structure demonstrates the principle of embedding data. Instead of creating a separate collection for sensor readings and joining them via foreign keys, the readings are nested directly within the document. This approach minimizes the need for multi-table joins, which is a key tenet of MongoDB's design to keep data that is accessed together stored together, resulting in faster read performance and simplified application logic for time-series or hierarchical datasets.

Answer

Normalization for maximum data consistency.

Answer

Enforcement of a rigid schema using array types.

Answer

The use of an Oplog to track document changes.

Question 16

Which THREE components are mandatory architectural parts of every fully functioning MongoDB sharded cluster deployment? Choose 3 answers.

Accepted Answer

A config server replica set that stores all cluster metadata, chunk ranges, and routing configuration data.. A sharded cluster relies on three core functional components: config servers to maintain cluster metadata, mongos query routers to direct client requests, and shard replicas to store partitioned data safely. Knowing these architecture requirements helps administrators design resilient, highly available production clusters with proper redundancy at every layer of the infrastructure.

Answer

A dedicated primary balancer coordinator node running outside the config server replica set to manage migrations.

Answer

An independent Apache ZooKeeper quorum cluster to coordinate distributed locking across all participating mongod nodes.

Question 17

An application serves users in Europe and North America. The DBA wants to ensure that European user data stays on shards located in Europe to comply with data residency laws. Which feature should be used?

Accepted Answer

Zones and Zone Ranges.. Zones (formerly known as tag-aware sharding) allow administrators to associate specific shard key ranges with particular shards. By tagging shards with geographical identifiers and defining zones for ranges of the shard key, the balancer will automatically move data to the appropriate physical location. This is essential for meeting regulatory requirements and reducing latency.

Answer

Replica set tags for read preferences.

Answer

Hashed sharding with a geo-spatial index.

Answer

The movePrimary command for each database.

Question 18

Which command is used to verify the current replica set configuration and the state of all members?

Accepted Answer

rs.status(). Checking the replica set status is a routine administrative task to ensure high availability and data consistency. The 'rs.status()' command provides a comprehensive view of the cluster, including the state of every member, the current primary, and the sync lag. This command is the primary diagnostic tool for verifying that the replica set is healthy and that all nodes are correctly communicating with each other.

Answer

db.serverStatus()

Answer

rs.conf()

Answer

db.isMaster()

Question 19

Refer to the exhibit. The explain output shows a SORT stage wrapping an IXSCAN stage. What is the performance implication of this execution plan?

Accepted Answer

The query engine performed an in-memory sort because the index did not support the requested sort order.. When a SORT stage wraps an IXSCAN stage, it means the index used for filtering did not satisfy the sort requirement. The query engine had to load the matching documents into memory to sort them, risking memory limit exceptions on large result sets.

Answer

The query is fully optimized because it leverages an index scan for filtering records.

Answer

The query executed a full collection scan across all cluster nodes.

Answer

The storage engine automatically converted the query into a covered query.

Question 20

Which cursor method should you use to sort documents by a field named 'age' in descending order?

Accepted Answer

.sort({age: -1}). The sort() method is used to define the order of results returned by a query. Passing {age: -1} ensures that the documents are ordered from oldest to youngest. Mastering sorting is essential for returning data in a meaningful way to users, such as showing the most recent posts or the highest-rated products first, which are common requirements for almost all web and mobile applications.

Answer

.sort({age: 1})

Answer

.orderBy({age: 'desc'})

Answer

.order({age: 'desc'})