MD-102 Practice Exam 3 — 20 Questions

Question 1

You are deploying Microsoft 365 Apps for enterprise using Microsoft Intune. Which TWO methods can you use to assign the application to users?

Accepted Answer

Assign to a device group.. Microsoft Intune supports assigning Microsoft 365 Apps for enterprise directly to device groups, which ensures the application is installed on the specified devices regardless of which user signs in. This method is useful for shared or kiosk devices where user-based assignment would not apply. Option E is correct because assigning to a Microsoft Entra ID user group is the standard method for user-based deployment, allowing the apps to be provisioned based on user identity.

Answer

Assign to individual users directly.

Answer

Assign to a distribution group.

Answer

Assign to a dynamic group using device attributes.

Question 2

Your organization is deploying Windows 10 devices using Windows Autopilot. The devices are purchased from a vendor and will be shipped directly to users. You need to ensure that the devices are automatically enrolled in Intune and configured with your organization's standard settings as soon as the user turns on the device and connects to the internet. The devices should be Azure AD joined. What is the minimal configuration required?

Accepted Answer

Upload the device's hardware hash to Microsoft Intune.. The hardware hash must be uploaded to Microsoft Intune for Autopilot to automatically recognize the device, enroll it in Intune, and join it to Azure AD upon first boot. Option A is incorrect because vendors cannot pre-configure Autopilot settings; they should provide the hardware hash. Option B is incorrect because the hardware hash is uploaded to Intune, not Azure AD directly. Option C is incorrect because the user should not manually enroll; Autopilot automates the process.

Answer

Ask the vendor to configure the devices with your organization's settings before shipping.

Answer

Upload the device's hardware hash to Azure AD.

Answer

Instruct the user to manually enroll the device after receiving it.

Question 3

Refer to the exhibit. You have configured the above Windows Autopilot profile. A device with this profile is being set up. However, the device does not appear to be provisioning correctly. What is the most likely issue?

Accepted Answer

The device does not have a TPM 2.0 chip.. Windows Autopilot self-deploying mode requires a TPM 2.0 chip to perform hardware-based attestation and automatically enroll the device without user interaction. If the device lacks TPM 2.0, the provisioning process will fail because the required cryptographic keys for attestation cannot be generated, preventing the device from completing the self-deploying profile.

Answer

The device name template is invalid.

Answer

The profile requires a user to sign in during deployment.

Answer

The language settings are not configured.

Question 4

Your organization is planning to deploy Windows 11 to 5000 devices using Microsoft Intune. The devices are currently a mix of Windows 10 and Windows 11 eligible hardware. You need to ensure that only devices meeting the Windows 11 hardware requirements can be upgraded. What is the most efficient way to achieve this using Intune?

Accepted Answer

Create a Windows feature update profile targeting Windows 11 and assign it to all devices; Intune will automatically skip ineligible devices.. A Windows feature update profile in Intune automatically checks device hardware eligibility before applying the Windows 11 upgrade. Intune queries the Windows Update for Business service, which evaluates TPM 2.0, Secure Boot, CPU generation, and RAM requirements; devices that do not meet the minimum hardware requirements are skipped without any manual intervention or additional configuration.

Answer

Use Windows Autopilot to reset each device and manually verify hardware compatibility.

Answer

Create a dynamic device group based on TPM version and assign a Windows 10 update ring to non-compliant devices.

Answer

Create a compliance policy requiring TPM 2.0 and Secure Boot, then assign a Windows 11 update ring to compliant devices.

Question 5

You have a Windows 10 device that is managed by Intune and enrolled in Microsoft Defender for Endpoint. The device is reporting a high number of false positive detections from Microsoft Defender Antivirus. You need to configure an exclusion for a specific folder path to reduce false positives. Where should you configure the exclusion?

Accepted Answer

In the endpoint protection profile for Microsoft Defender Antivirus in Intune. In an Intune-managed environment, antivirus exclusions for Microsoft Defender Antivirus are configured within the endpoint protection profile, specifically under the Microsoft Defender Antivirus settings. This profile is assigned to devices via Intune policies, allowing centralized management of exclusions without requiring on-premises Group Policy or direct interaction with the Microsoft Defender Security Center portal.

Answer

In a device compliance policy

Answer

In Group Policy

Answer

In Microsoft Defender Security Center

Question 6

You deploy a new line-of-business app to Windows 10 devices via Intune. Users report that the app does not appear in the Company Portal. You verify that the app is assigned to the correct group. What is the most likely cause?

Accepted Answer

The app's installation behavior is set to 'System'.. When a line-of-business (LOB) app is deployed with installation behavior set to 'System', it installs in the device context and runs as SYSTEM. The Company Portal only displays apps installed in the user context. Even though the app is assigned to the correct group, it will not appear in the Company Portal because the portal filters out system-context apps. To make it visible, the installation behavior must be set to 'User'.

Answer

The app is not supported on Windows 10.

Answer

Users need to add the app manually.

Answer

The app is assigned to the wrong group.

Question 7

Your organization uses Microsoft Intune to manage devices. You need to ensure that devices that are not compliant are blocked from accessing corporate resources. Which configuration should you use?

Accepted Answer

Create a Conditional Access policy that requires compliant devices.. Conditional Access policies in Azure AD are the correct mechanism to enforce access controls based on device compliance status. By creating a policy that requires devices to be marked as compliant, you ensure that only compliant devices can access corporate resources, while non-compliant devices are blocked at the authentication level. This integrates with Intune compliance policies to evaluate device health before granting access.

Answer

Create a device compliance policy and assign it to users.

Answer

Create a device configuration profile that restricts access.

Answer

Configure enrollment restrictions to block non-compliant devices.

Question 8

You need to deploy Microsoft 365 Apps to 1000 devices using Microsoft Intune. The devices are a mix of Windows 10 and Windows 11. Which app deployment method should you use to ensure the latest version is always installed?

Accepted Answer

Deploy Microsoft 365 Apps for enterprise as a built-in app type in Intune.. The Microsoft 365 Apps for enterprise built-in app type in Intune is specifically designed to deploy and manage Office with automatic updates from the Office Content Delivery Network (CDN). This method ensures that devices always receive the latest version of Microsoft 365 Apps without requiring manual intervention or custom configuration, as Intune handles the deployment policy and update channel settings natively.

Answer

Deploy a line-of-business app from the installation file.

Answer

Deploy a Win32 app with the Office Deployment Tool.

Answer

Deploy a custom script that installs Office from a network share.

Question 9

Your organization uses Microsoft Intune to manage devices. You need to ensure that only compliant devices can access corporate email. You configure a Conditional Access policy in Microsoft Entra ID targeting Exchange Online. What else must you configure in Intune to enforce compliance?

Accepted Answer

Device compliance policies.. A is correct because Conditional Access policies in Microsoft Entra ID evaluate device compliance status, but they rely on Intune to report that status. Without a device compliance policy assigned to the device, Intune cannot mark the device as compliant, so the Conditional Access policy will block access or treat the device as non-compliant. You must create and assign a compliance policy in Intune that defines the required security baselines (e.g., encryption, OS version, jailbreak detection) for the device to be considered compliant.

Answer

No additional configuration is needed.

Answer

Device configuration policies.

Answer

App protection policies.

Question 10

You are planning a Windows 11 deployment using Microsoft Intune. The organization has a requirement that all devices must have BitLocker enabled with a TPM protector. You configure a BitLocker policy in Intune. However, some devices report that BitLocker is not enabled. What is the most likely reason?

Accepted Answer

The devices have TPM version 1.2 instead of 2.0.. The most likely reason is that the devices have TPM version 1.2 instead of 2.0. BitLocker requires a TPM 2.0 chip to support the TPM protector when using the default Intune policy settings; TPM 1.2 is not supported for this configuration in Windows 11, as Microsoft requires TPM 2.0 for BitLocker system drive encryption with a TPM protector.

Answer

The devices are not joined to Microsoft Entra ID.

Answer

The BitLocker policy is configured only for Windows 11 Enterprise devices.

Answer

The devices are running Windows 10 instead of Windows 11.

Question 11

Your organization uses Microsoft Intune and you need to configure Windows Autopilot for hybrid Microsoft Entra ID join. Which THREE components are required?

Accepted Answer

A domain join profile (configured in Intune).. A domain join profile is required for hybrid Microsoft Entra ID join because it provides the on-premises Active Directory domain information that the device needs during Autopilot provisioning. Without this profile, the device cannot complete the domain join step, which is essential for establishing the hybrid identity state.

Answer

A device compliance policy.

Answer

An MDM push certificate.

Question 12

Your organization uses Microsoft Intune to manage Windows 10 devices. You need to configure a Windows 10 update ring that ensures feature updates are deferred by 120 days and quality updates are deferred by 30 days. Which settings should you configure in the update ring?

Accepted Answer

Set feature update deferral to 120 days and quality update deferral to 30 days.. The Windows 10 update ring settings in Microsoft Intune allow you to specify deferral periods for feature updates and quality updates independently. To meet the requirement of deferring feature updates by 120 days and quality updates by 30 days, you must set the feature update deferral to 120 days and the quality update deferral to 30 days. These values directly control how long the device waits before installing the respective update types after Microsoft releases them.

Answer

Set feature update deferral to 180 days and quality update deferral to 0 days.

Answer

Set feature update deferral to 30 days and quality update deferral to 120 days.

Answer

Set both feature and quality update deferrals to 60 days.

Question 13

You are configuring Microsoft Defender for Endpoint in Microsoft Intune for Windows 10 devices. You need to ensure that when a threat is detected, the device automatically receives a remediation action. Which configuration should you use?

Accepted Answer

Enable 'Automatic remediation' in the Microsoft Defender Antivirus policy.. Enabling 'Automatic remediation' in the Microsoft Defender Antivirus policy within Intune's endpoint security node ensures that when a threat is detected, the device automatically applies the configured remediation action (e.g., quarantine, remove, or block) without requiring manual intervention. This setting directly controls the behavior of Microsoft Defender Antivirus to act on detected threats, aligning with the requirement for automatic remediation.

Answer

Configure a device compliance policy to mark the device as non-compliant.

Answer

Enable 'Manual investigation' in the endpoint security policy.

Answer

Create an alert rule in Microsoft Defender XDR to notify administrators.

Question 14

Which THREE are valid Windows Autopilot deployment scenarios?

Accepted Answer

Self-deploying. Windows Autopilot self-deploying is a valid deployment scenario where a device can be automatically configured without user interaction, using a hardware hash to enroll in Azure AD and Intune. This scenario is ideal for kiosks, digital signage, or shared devices that require zero-touch provisioning.

Answer

App-driven

Answer

Policy-driven

Question 15

You are planning to deploy Microsoft 365 Apps to Windows devices using Microsoft Intune. Which TWO methods can you use to deploy Microsoft 365 Apps? (Choose two.)

Accepted Answer

Windows Installer (Win32) app type using the Office Deployment Tool.. The Windows Installer (Win32) app type in Intune allows you to deploy Microsoft 365 Apps using the Office Deployment Tool (ODT), which provides granular control over installation settings, languages, and update channels. Option E is correct because Intune includes a dedicated 'Microsoft 365 Apps for Windows' app type that simplifies deployment by automatically configuring the ODT XML and handling the installation process without manual scripting.

Answer

Android store app type.

Answer

Web link app type pointing to the Office website.

Answer

iOS store app type.

Question 16

You are configuring Windows Hello for Business in Microsoft Intune. Which THREE settings are required to enable Windows Hello for Business on Windows 10 devices?

Accepted Answer

Set minimum PIN length to at least 4 digits.. Windows Hello for Business requires a minimum PIN length of at least 4 digits when configured via Intune's identity protection policy. This setting is mandatory to enforce a baseline level of security for the PIN-based authentication method, and Intune will not enable Windows Hello for Business without a defined minimum PIN length.

Answer

Configure a certificate enrollment policy for smart cards.

Answer

Enable biometric authentication.

Question 17

You are deploying Windows 10 to 100 new devices using Microsoft Deployment Toolkit (MDT). You want to integrate with Microsoft Intune for post-deployment management. Which MDT integration method should you use?

Accepted Answer

Create a provisioning package in MDT that includes the Intune enrollment configuration and apply it during the deployment task sequence.. MDT can create a provisioning package (PPKG) that includes Intune enrollment configuration (e.g., enrollment token, tenant ID) and apply it during the task sequence. This allows the device to automatically enroll into Intune after the OS deployment completes, enabling post-deployment management without requiring Configuration Manager or Autopilot.

Answer

Use Microsoft Configuration Manager to deploy the devices and then co-manage with Intune.

Answer

Configure Windows Autopilot for the devices and skip MDT.

Answer

Install the Intune connector for MDT and configure it during deployment.

Question 18

Your organization is planning to deploy Microsoft Entra hybrid joined devices. What is a prerequisite for this configuration?

Accepted Answer

Microsoft Entra Connect must be installed and configured.. Microsoft Entra hybrid joined devices require synchronization of on-premises Active Directory identities to Microsoft Entra ID. Microsoft Entra Connect (or Microsoft Entra Connect Sync) is the tool that performs this identity synchronization, making it a mandatory prerequisite. Without it, the on-premises AD objects cannot be linked to Entra ID for hybrid join.

Answer

Azure AD Premium P1 license is required.

Answer

Microsoft Intune must be enabled for auto-enrollment.

Answer

Microsoft Defender for Endpoint must be deployed.

Question 19

Which TWO actions should you take to prepare infrastructure for devices running macOS in your organization? (Select two.)

Accepted Answer

Deploy the Company Portal app to macOS devices.. The Company Portal app is the primary interface for users to enroll macOS devices in Microsoft Intune, access corporate resources, and manage compliance. Deploying it ensures users can initiate enrollment and receive policies. Option B is correct because enrolling macOS devices in Intune is the foundational step to apply management policies, deploy apps, and enforce compliance settings via MDM.

Answer

Configure Windows Autopilot for macOS devices.

Answer

Join macOS devices to Microsoft Entra ID.

Answer

Use Group Policy to manage macOS settings.

Question 20

Your organization uses Microsoft Defender for Endpoint. You need to ensure that devices onboarding to Microsoft Defender for Endpoint are automatically assigned to a specific device group based on their operating system version. What should you use?

Accepted Answer

Configure device group rules in Microsoft Defender for Endpoint using OS version condition.. Device group rules in Microsoft Defender for Endpoint allow you to automatically assign devices to groups based on conditions such as operating system version. This is the correct approach because it uses the built-in grouping engine that evaluates device attributes during onboarding, ensuring consistent and automated assignment without manual intervention.

Answer

Manually tag each device in the Microsoft 365 Defender portal.

Answer

Use Microsoft Entra ID dynamic groups based on device OS.

Answer

Create a Microsoft Intune compliance policy that tags devices by OS version.