CEH Timed Practice Test 1 — 10 Questions

Question 1

A security analyst runs `nmap -sS -sV -A 192.168.1.100` and obtains open ports and service versions. However, the analyst suspects the target is behind an IDS/IPS. Which Nmap technique would BEST evade detection while still performing a similar scan?

10 minute time limit — choose an answer to begin.

Accepted Answer

Add -f to fragment IP packets. Using the `-f` flag fragments the IP packets, splitting the TCP header across multiple packets. This helps evade simple IDS/IPS signatures that rely on detecting a complete SYN scan in a single packet, as the fragmented packets may bypass pattern-matching rules or reassembly buffers.

Answer

Use -sT instead of -sS to perform a full TCP connect scan

Answer

Increase timing to -T5 for a faster scan

Answer

Replace -sV with -sU to scan UDP services

Question 2

A security analyst runs the Nmap command: nmap -sI 192.168.1.50 -p 80 10.0.0.1. The scan completes, but the target shows no open ports. What is the MOST likely explanation?

Accepted Answer

The zombie host is not truly idle, causing false results. The -sI flag in Nmap performs an idle scan, which relies on a zombie host (192.168.1.50) with a globally predictable IP ID sequence to probe the target. If the zombie host is not truly idle—meaning it is sending or receiving other traffic during the scan—its IP ID values will increment unpredictably, corrupting the side-channel analysis and causing Nmap to report all ports as filtered or closed. This is the most likely reason for the false 'no open ports' result.

Answer

The analyst used the wrong port number

Answer

The target has a firewall blocking the decoy packets

Answer

The target host is offline

Question 3

Which TWO of the following tools are capable of cracking password hashes offline? (Select 2)

Accepted Answer

Hashcat. Hashcat is a high-performance password recovery tool that supports offline cracking of password hashes using GPU acceleration. It can process a wide range of hash types (e.g., MD5, SHA-1, bcrypt, NTLM) by comparing precomputed or brute-force generated hashes against a target hash file, all without interacting with a live authentication server.

Answer

Hydra

Answer

Nmap

Answer

Wireshark

Question 4

Which TWO of the following are effective countermeasures against SNMP enumeration attacks? (Select 2)

Accepted Answer

Restrict SNMP access to trusted IP addresses using ACLs. Effective SNMP enumeration countermeasures include (A) restricting SNMP access to trusted IP addresses via ACLs, which prevents unauthorized hosts from querying SNMP agents, and (C) changing default community strings to strong, unique values, making it harder for attackers to guess them. Option B (disabling SNMP) is impractical in many environments because SNMP is needed for network monitoring. Option D (enabling SNMPv3 with default passwords) is ineffective because default passwords are easily guessed. Option E (using SNMPv1 with community string 'private') is the default and well-known, making enumeration trivial. Therefore, A and C are the correct choices.

Answer

Disable SNMP on all devices

Answer

Enable SNMPv3 with default passwords

Answer

Use SNMPv1 with community string 'private'

Question 5

A security analyst wants to discover all DNS records associated with a domain without triggering a full zone transfer. Which tool is BEST suited for this task?

Accepted Answer

dnsrecon. D (dnsrecon) is correct because it is a dedicated DNS enumeration tool that performs multiple types of DNS record queries (A, AAAA, CNAME, MX, NS, SOA, SRV, TXT, etc.) using techniques like brute‑forcing subdomains and performing SRV record enumeration, all without attempting a full zone transfer (AXFR). It is specifically designed for reconnaissance and can discover hidden or non‑obvious DNS records efficiently.

Answer

theHarvester

Answer

dig

Answer

nslookup

Question 6

A security analyst runs `nmap -sU -p 161,162 10.0.0.1` and receives output showing port 161/udp is open. Which service is MOST likely running on this port?

Accepted Answer

SNMP. Port 161/udp is the default port for SNMP (Simple Network Management Protocol) used by SNMP agents to receive management queries (GET, SET) from SNMP managers. The `-sU` flag performs a UDP scan, and the open result on 161/udp strongly indicates an SNMP service is listening, as defined in RFC 1157.

Answer

DHCP

Answer

TFTP

Answer

DNS

Question 7

Which of the following tools is specifically designed to automate the process of detecting and exploiting SQL injection vulnerabilities in web applications?

Accepted Answer

SQLMap. SQLMap is an open-source penetration testing tool that automates the detection and exploitation of SQL injection flaws. It supports a wide range of database backends and injection techniques, making it the go-to tool for this specific task.

Answer

Burp Suite

Answer

Metasploit

Answer

Nmap

Question 8

A security team suspects a session hijacking attack. The analyst examines network traffic and sees packets with sequence numbers that increment by predictable values. Which attack is MOST likely occurring?

Accepted Answer

TCP sequence prediction. TCP sequence prediction attacks exploit the ability to guess the next sequence number in a TCP connection, allowing an attacker to inject forged packets and hijack the session. The analyst observed packets with sequence numbers incrementing by predictable values, which is the hallmark of weak or static sequence number generation in older TCP implementations.

Answer

ARP poisoning

Answer

DNS spoofing

Answer

MAC flooding

Question 9

Which THREE of the following are valid techniques for covering tracks after compromising a system? (Select 3 correct answers)

Accepted Answer

Clearing event logs using wevtutil. A is correct because wevtutil is a Windows command-line utility used to manage event logs. After compromising a system, an attacker can use 'wevtutil cl' followed by a log name (e.g., 'wevtutil cl System') to clear specific event logs, thereby erasing evidence of their activities. This is a direct and common technique for covering tracks by removing forensic artifacts.

Answer

Exploiting SUID binaries to gain root

Answer

Disabling Windows Defender via Group Policy

Question 10

Which TWO of the following are examples of application-layer DDoS attacks? (Select 2)

Accepted Answer

Slowloris. Slowloris is an application-layer DDoS attack that targets web servers by opening multiple HTTP connections and keeping them alive with partial requests, sending headers periodically to prevent timeout. It exploits the server's connection handling at Layer 7, exhausting the connection pool without requiring high bandwidth.

Answer

SYN flood

Answer

Smurf attack

Answer

UDP flood