DP-203 Practice Test 2 — 30 Questions

Question 1

You are designing a solution to store telemetry data from millions of devices. Each device sends a JSON payload every 5 seconds. The data must be partitioned by device ID and time for efficient querying and must support real-time streaming ingestion. Which Azure storage solution should you recommend?

Choose an answer to begin — your selection is scored in the full session.

Accepted Answer

Azure Cosmos DB. Azure Cosmos DB is the correct choice because it offers a multi-model, globally distributed database service with native support for real-time streaming ingestion via the Change Feed and automatic indexing. Its partition key design (device ID + time) enables efficient querying across millions of devices, and it guarantees single-digit millisecond read/write latencies essential for telemetry data arriving every 5 seconds.

Answer

Azure SQL Database

Answer

Azure Blob Storage with Azure Event Hubs

Answer

Azure Table Storage

Question 2

You are optimizing a data pipeline in Azure Synapse Analytics that loads data from a CSV file in ADLS Gen2 into a dedicated SQL pool using PolyBase. The load is slow and you need to improve performance. Which action would be MOST effective?

Accepted Answer

Combine the CSV files into fewer, larger files before loading.. Combining many small CSV files into fewer, larger files reduces the number of file open/close operations and minimizes the overhead of PolyBase's external file enumeration and parallel split logic. PolyBase performs best when each file is at least 256 MB, as it can then assign a full file to each distribution, avoiding the overhead of splitting tiny files across multiple threads.

Answer

Increase the service level (DWU) of the dedicated SQL pool.

Answer

Change the file format from CSV to Avro.

Answer

Use Azure Data Factory to stage the data in Azure Blob Storage before loading.

Question 3

Your organization is using Azure Synapse Analytics dedicated SQL pool. You notice that queries are running slower than expected. Upon reviewing the execution plans, you see that some queries are performing table scans instead of seeks on large fact tables. What is the most likely cause?

Accepted Answer

The statistics on the tables are outdated or missing.. Outdated or missing statistics prevent the Azure Synapse Analytics dedicated SQL pool query optimizer from accurately estimating row counts and data distribution. Without reliable statistics, the optimizer may incorrectly choose a table scan over a more efficient index seek or partition elimination, leading to slower query performance on large fact tables.

Answer

The tables are distributed using round-robin distribution.

Answer

Result-set caching is disabled.

Answer

The resource class for the user is set to smallrc.

Question 4

You are building a real-time dashboard to monitor user activity on a website. The data is ingested via Azure Event Hubs and must be aggregated every minute with a 30-second late-arrival tolerance. The aggregated results should be stored in Azure Cosmos DB for low-latency reads. Which Azure service should you use to perform the windowed aggregation?

Accepted Answer

Azure Stream Analytics with a tumbling window of 1 minute and a late-arrival policy of 30 seconds.. Azure Stream Analytics is the correct choice because it natively supports windowed aggregations (tumbling, hopping, sliding, session) and allows you to define a late-arrival policy to handle out-of-order events. A tumbling window of 1 minute with a late-arrival tolerance of 30 seconds meets the requirement exactly, and the output can be directly written to Azure Cosmos DB for low-latency reads.

Answer

Azure Functions triggered by Event Hubs to aggregate data and write to Cosmos DB.

Answer

Azure Databricks with structured streaming and a sliding window.

Answer

Azure Analysis Services to process streaming data directly from Event Hubs.

Question 5

You are designing a data processing solution that uses Azure Databricks to transform large datasets. You need to ensure that the processing is cost-effective and can scale to handle variable workloads. Which cluster configuration should you recommend?

Accepted Answer

Use an auto-scaling cluster with spot instances.. Auto-scaling clusters in Azure Databricks dynamically adjust the number of workers based on workload demands, ensuring cost-effectiveness by scaling down during low activity. Spot instances (Azure Spot VMs) further reduce costs by using unused Azure capacity at a significant discount, making this combination ideal for variable workloads where fault tolerance is acceptable.

Answer

Use a fixed-size cluster with premium tier.

Answer

Use a Photon-accelerated cluster with premium tier.

Answer

Use an interactive cluster with a large number of workers.

Question 6

You are optimizing a data pipeline in Azure Data Factory that uses a Copy activity to transfer data from an Azure SQL Database to a dedicated SQL pool in Azure Synapse Analytics. The source table has 500 million rows and the copy operation is taking too long. You need to reduce the copy duration. Which configuration change will have the most impact?

Accepted Answer

Enable staging and use PolyBase as the copy method for the sink.. Enabling staging with PolyBase as the copy method for the sink is the most impactful change because PolyBase leverages the massively parallel processing (MPP) architecture of Azure Synapse Analytics to load data in parallel directly into the dedicated SQL pool. This bypasses the single-threaded bottleneck of the standard INSERT-based copy method, dramatically reducing the time required to ingest 500 million rows.

Answer

Change the copy behavior to 'sequential' to reduce load on the source.

Answer

Increase the degree of copy parallelism (DOP) to the maximum value supported.

Answer

Split the source data into multiple smaller files and use multiple copy activities running in parallel.

Question 7

Refer to the exhibit. You are monitoring the CopyDataPipeline in Azure Data Factory. The copy activity is failing with timeout errors. What is the most likely cause?

Accepted Answer

The writeBatchTimeout is set too low (30 seconds), causing timeouts. The copy activity in Azure Data Factory is failing with timeout errors because the `writeBatchTimeout` is set to 30 seconds, which is too low for the volume of data being written to the sink. This property defines the maximum time allowed for a single batch write operation to complete; when it expires, the activity times out. Increasing this value (e.g., to 120 seconds or more) accommodates larger or slower writes, resolving the timeout.

Answer

The enableStaging is false, causing network congestion

Answer

The writeBatchSize is too large (10000), exceeding SQL limits

Answer

The recursive property is set to true, causing infinite loops

Question 8

You are building a data pipeline in Azure Data Factory to copy data from an on-premises SQL Server database to Azure Blob Storage. The pipeline must run daily and handle incremental updates. The on-premises SQL Server table has a LastModifiedDate column that is updated when a row changes. What is the most efficient way to implement incremental loads?

Accepted Answer

Use a Lookup activity to get the maximum LastModifiedDate from the destination, then use a Copy activity with a query that filters rows where LastModifiedDate > that value.. It uses a Lookup activity to retrieve the maximum LastModifiedDate from the destination (Azure Blob Storage), then passes that value as a parameter to a Copy activity that queries only rows where LastModifiedDate exceeds it. This minimizes data transfer by reading only new or changed rows, and it avoids the overhead of enabling Change Data Capture or performing full loads, making it the most efficient approach for incremental loads in Azure Data Factory.

Answer

Enable Change Data Capture (CDC) on the SQL Server database and use an ADF mapping data flow to read changes.

Answer

Use a tumbling window trigger with a window size of 1 day and copy all data from the source each time.

Answer

Perform a full load every day and use a Delete activity to remove duplicates.

Question 9

Which TWO Azure services can be used to perform data transformation in a data pipeline? (Select two.)

Accepted Answer

Azure Data Factory. Azure Data Factory is a cloud-based ETL service that provides a code-free visual interface for orchestrating data movement and transformation at scale. It supports data flows, which allow you to perform transformations like aggregations, joins, and filtering without writing code, making it a correct choice for data transformation in a pipeline.

Answer

Azure Monitor

Answer

Azure Storage

Answer

Azure Event Hubs

Question 10

You are designing a data processing pipeline in Azure Data Factory that ingests data from an on-premises SQL Server database to Azure Data Lake Storage Gen2. The data volume is large (500 GB). The network connection between on-premises and Azure is limited to 100 Mbps. You need to minimize the time to transfer the initial full load while ensuring data integrity. Which approach should you recommend?

Accepted Answer

Use Azure Data Box to copy the data offline. Azure Data Box physically ships the data, bypassing network bandwidth limitations for large initial loads. Option A is wrong because it would take over 11 hours even at full bandwidth, and network may not be stable. Option B is wrong because it compresses but still uses network. Option C is wrong because VPN adds overhead.

Answer

Use Azure Data Factory copy activity with parallel connections

Answer

Use Azure ExpressRoute to increase bandwidth

Answer

Compress the data using GZip and use copy activity

Question 11

Refer to the exhibit. You are configuring an Azure Purview data policy for Azure Storage. The policy above is intended to audit all access events. However, the security team complains that not all read events are being audited. What is the most likely reason?

Accepted Answer

The storage account is not enabled for Purview policy enforcement.. The security team reports that not all read events are being audited. The policy uses 'ALL_ACTIONS' which should include read events, so the issue is not with the action group or predicate. The most likely reason is that the storage account has not been enabled for Purview policy enforcement. Azure Purview requires the 'AllowPurviewPolicyEnforcement' property to be enabled on the storage account for policies to take effect. Without this, no auditing events are captured, even if the policy is correctly defined.

Answer

The filter predicate is set to 'true', which only captures a subset of events.

Answer

The action group 'ALL_ACTIONS' does not include read events.

Answer

The policy excludes the 'Read' action by default.

Question 12

Your organization uses Microsoft Purview to catalog data assets. You need to ensure that sensitive data such as credit card numbers are automatically detected and labeled. Which Purview feature should you configure?

Accepted Answer

Configure a scan rule set with built-in classification rules for sensitive data types.. Microsoft Purview can automatically detect sensitive data like credit card numbers by configuring a scan rule set that includes built-in classification rules. Option A is incorrect because Azure Policy enforces compliance rules but does not perform data scanning or classification. Option C is incorrect because Data Catalog self-service search is for discovering and searching data assets, not for automatic sensitive data detection. Option D is incorrect because Microsoft Information Protection is primarily for labeling and protection in Microsoft 365, not for scanning data in Purview.

Answer

Create an Azure Policy to enforce tagging.

Answer

Enable the Data Catalog self-service search.

Answer

Enable Microsoft Information Protection for the data sources.

Question 13

You are designing a change data capture (CDC) solution to incrementally load data from an on-premises SQL Server database to Azure Synapse Analytics. The source tables have no timestamp columns and you cannot modify the schema. Which Azure service should you use?

Accepted Answer

Azure Data Factory with change tracking. Azure Data Factory's change tracking capability is the correct choice because it can capture row-level inserts, updates, and deletes from SQL Server without requiring timestamp columns or schema modifications. It uses SQL Server's built-in change tracking feature, which tracks changes at the table level and provides a reliable incremental load mechanism to Azure Synapse Analytics.

Answer

Azure Synapse Pipelines with mapping data flows

Answer

Azure Databricks with Auto Loader

Answer

Azure Stream Analytics

Question 14

You are designing a data processing solution in Azure Synapse Analytics. The solution must use a serverless SQL pool to query data in Azure Data Lake Storage Gen2. The data is stored in Delta Lake format. Which of the following statements is true regarding querying Delta Lake tables with serverless SQL pool?

Accepted Answer

You can use the OPENROWSET function with the BULK option and FORMAT='DELTA' to query Delta Lake tables.. Serverless SQL pool in Azure Synapse Analytics supports querying Delta Lake tables directly using the OPENROWSET function with the BULK option and FORMAT='DELTA'. This allows you to read Delta Lake data stored in Azure Data Lake Storage Gen2 without needing to convert it to Parquet or create external tables first. The Delta format is natively supported, enabling time travel and schema evolution features.

Answer

Serverless SQL pool supports Delta Lake only if the files are in Parquet format.

Answer

Serverless SQL pool cannot query Delta Lake tables; you must convert them to Parquet first.

Answer

You must create an external table in serverless SQL pool using the CREATE EXTERNAL TABLE statement with the Delta format.

Question 15

Refer to the exhibit. A Bicep file is used to deploy an Azure Synapse Analytics workspace. What is the purpose of the 'purviewConfiguration' property?

Accepted Answer

It links the workspace to a Microsoft Purview account for data lineage and cataloging. The 'purviewConfiguration' property in a Bicep file for Azure Synapse Analytics links the workspace to a Microsoft Purview account. This integration enables automated data lineage tracking, cataloging, and discovery across the Synapse environment, allowing users to search for and govern data assets directly from Purview. Without this property, the Synapse workspace operates independently of Purview's unified data governance capabilities.

Answer

It configures automated backups of the Synapse workspace

Answer

It enables monitoring of data movement by Azure Monitor

Answer

It connects the workspace to a data catalog for pipeline sources

Question 16

You are a data engineer at a retail company. You have designed a near real-time data processing solution using Azure Stream Analytics. The input is from Azure Event Hubs, which receives clickstream events from the company's e-commerce website. The output is written to an Azure SQL Database table for reporting. Each event includes fields: UserId, ProductId, EventType (e.g., 'click', 'purchase'), and Timestamp. The requirement is to calculate the number of purchases per product in a 5-minute tumbling window and update a SQL table. The Stream Analytics job has been running for a week, but the reporting team notices that the purchase counts in SQL are consistently lower than expected compared to a direct count from Event Hubs. You suspect that late-arriving events are being dropped. The job's configuration includes a 5-minute tumbling window with no late arrival policy. What should you do to fix the issue without losing data?

Accepted Answer

Modify the query to use a larger tumbling window (e.g., 10 minutes) and add a late arrival policy with a 5-minute grace period to allow late events to be included.. The current 5-minute tumbling window has no late arrival policy, so any event that arrives after the window ends is dropped. By increasing the window size to 10 minutes and adding a 5-minute late arrival grace period, you allow events that arrive up to 5 minutes late to still be included in the correct window, matching the actual purchase count from Event Hubs.

Answer

Modify the query to use TIMESTAMP BY on the EventHubs enqueued time instead of the event's Timestamp field.

Answer

Change the tumbling window to a hopping window with a 1-minute hop size to increase the frequency of output updates.

Answer

Add a second Stream Analytics job to process late-arriving events separately and union the results.

Question 17

Which THREE statements are true about partitioning in Azure Synapse Analytics dedicated SQL pool?

Accepted Answer

Partition switching can be used to quickly load data into a table.. Partition switching in Azure Synapse Analytics dedicated SQL pool allows you to quickly load data into a table by switching a partition from a staging table into the target table. This operation is metadata-only and does not require data movement, making it highly efficient for incremental data loads.

Answer

Partitions are automatically aligned with distributions.

Answer

Partitioning is only supported on tables with clustered rowstore indexes.

Question 18

You are using Azure Stream Analytics to process real-time temperature data from IoT devices. The output must be written to Azure SQL Database. The job has been running successfully for weeks, but recently you notice that the output data has duplicate rows. The input events are unique. The job uses a windowed aggregation (TumblingWindow). What is the most likely cause of duplicates?

Accepted Answer

The job is being restarted and reprocessing data.. When an Azure Stream Analytics job is restarted, it may reprocess data from the last checkpoint or from the beginning of the input stream, depending on the configured start time and output policy. This reprocessing can cause duplicate rows in the output, especially when using windowed aggregations like TumblingWindow, because the same events are aggregated again and written to Azure SQL Database without deduplication logic.

Answer

The job is not handling late-arriving events.

Answer

The input event hub is receiving duplicate events.

Answer

The tumbling window size is too small.

Question 19

You need to assign permissions to a service principal so that it can write data to a specific container in Azure Data Lake Storage Gen2, but not delete blobs. The above JSON shows the built-in role 'Storage Blob Data Contributor'. The role includes delete permission in DataActions. What should you do?

Accepted Answer

Create a custom role that includes read and write DataActions but excludes the delete DataAction, then assign that custom role.. Azure RBAC roles are all-or-nothing at the permission level; you cannot selectively remove a single DataAction from a built-in role at assignment time. The only way to grant write access without delete is to create a custom role that explicitly includes the required read and write DataActions (e.g., Microsoft.Storage/storageAccounts/blobServices/containers/blobs/write) and omits the delete DataAction (Microsoft.Storage/storageAccounts/blobServices/containers/blobs/delete). This custom role is then assigned to the service principal at the container scope, ensuring it can write data but never delete blobs.

Answer

Assign the Storage Blob Data Contributor role and create a deny assignment that denies delete.

Answer

Assign the Storage Blob Data Contributor role and use ACLs to deny delete on the container.

Answer

Assign the Storage Blob Data Contributor role and remove the delete permission at the role assignment scope.

Question 20

Which TWO actions can you take to optimize the performance of an Azure Synapse Analytics dedicated SQL pool? (Choose two.)

Accepted Answer

Replicate small dimension tables.. Replicating small dimension tables across all distributions reduces data movement during joins and improves query performance. Option E is correct because hash distribution on a column used in joins and aggregations ensures that rows with the same key are colocated on the same distribution, minimizing data shuffling. Option A is incorrect: scaling up increases resources but is not a targeted performance optimization and may not address underlying distribution or indexing issues. Option C is incorrect: heap indexes are generally not optimal for fact tables because they lack compression and indexing benefits; clustered columnstore indexes are recommended. Option D is incorrect: round-robin distribution distributes data evenly but does not reduce data movement for joins and aggregations, often leading to poor query performance.

Answer

Scale up the SQL pool to a higher DWU.

Answer

Use heap indexes for fact tables.

Answer

Use round-robin distribution for all large fact tables.