ON Premises Call Control

Which TWO configuration steps must be completed to ensure proper redundancy for a CUCM group? (Select TWO)

An administrator needs to ensure that internal calls between two sites are routed over an MTP-required SIP trunk, but the calls are failing due to codec mismatch. Which CUCM service parameter setting should be verified to allow the MTP to be inserted?

A user reports that calls to an external PSTN number are failing. The trace shows a '403 Forbidden' response from the provider. Where in CUCM should the administrator investigate the outbound calling search space (CSS) settings?

An administrator is configuring a new SIP trunk between CUCM and a CUBE. To ensure that CUCM correctly handles mid-call signaling updates such as hold/resume, which parameter in the SIP Profile should be verified?

A user reports that their calls are failing when they roam to a different physical office site. You observe that the device is registered to the primary CUCM cluster but the Location-based CAC is blocking the call. What is the most likely cause?

You are troubleshooting a scenario where internal calls between two offices are using the G.711 codec, but you want them to use G.729 to save bandwidth. Where should you change the codec setting?

When designing a redundant CUCM deployment, which mechanism ensures that if a primary subscriber fails, phones automatically register to a secondary subscriber?

You need to prevent certain internal users from making international calls while allowing them to dial local numbers. What is the most efficient way to implement this in CUCM?

Which component in CUCM is responsible for providing the necessary resources for conference calls, such as hardware or software-based conference bridges?

If a Translation Pattern is configured in CUCM, at what stage of the call processing does the digit manipulation occur?

Which field in a Route Pattern determines how CUCM processes a call when a user dials a number that matches the pattern?

You are implementing a centralized dial plan. You have multiple sites, each with local PSTN gateways. How can you ensure that an emergency call from a specific site is always routed to the local PSTN gateway of that site?

Which feature allows you to group multiple gateways and route lists to provide load balancing and failover for outbound calls?

In CUCM, what is the purpose of the 'Calling Search Space' (CSS)?

You are configuring a SIP trunk between CUCM and a CUBE. Which setting is critical to ensure that the SIP signaling is encrypted?

Where do you configure the time zone for a specific set of devices, such as those in a specific branch office?

A user complains that they cannot see the 'Transfer' softkey on their phone during an active call. Where is the most appropriate place to check the softkey configuration?

When a call is made to a destination that matches multiple partitions in a user's CSS, how does CUCM determine which pattern to use?

You are integrating an external voicemail system with CUCM. Which object is used to define the dialable number that users call to reach their voicemail box?

You are migrating a legacy PBX to CUCM. You need to normalize incoming caller IDs from the PSTN to E.164 format. Which tool is best suited for this at the gateway level?

Which component allows for automatic rerouting of a call if the primary gateway is busy or unreachable?

Which service in CUCM is responsible for handling the registration of SIP devices?

What is the function of a 'Device Pool' in CUCM?

How do you verify if a phone is registered to the primary CUCM subscriber?

What is the primary function of a 'Location' object in CUCM?

Which protocol is primarily used by CUCM to communicate with endpoints for registration and call control?

You are troubleshooting a one-way audio issue. The phone can register, but no audio is heard. What should you check first?

Which file does an IP phone download first to obtain its configuration from the TFTP server?

A branch office has a limited bandwidth link. You need to ensure that no more than 5 calls can be made across the WAN at once. What should you configure?

Where do you define the default dial plan for a new CUCM cluster?

You have a cluster with multiple nodes. You want to ensure that phones in the 'New York' office prioritize registration to a 'New York' subscriber. How do you implement this?

Which component in the CUCM dial plan allows you to match a pattern and simultaneously transform it into a new number before the final route lookup?

What is the result of using a '#' character at the end of a Route Pattern?

Which service, when enabled, allows CUCM to act as a recording server for calls?

You are implementing a SIP trunk to the PSTN. The carrier requires the 'Diversion' header for call forwarding scenarios. Where in CUCM do you configure this?

Which tool can be used to perform a bulk import of users and devices into CUCM?

What is the primary difference between a 'Route Pattern' and a 'Translation Pattern'?

Which THREE of the following items can be defined within a Device Pool?

Which TWO of the following are valid types of Media Resources in CUCM?

Which THREE of the following tasks are required to set up a basic SIP trunk in CUCM?

Which TWO of the following are valid methods to handle digit manipulation in CUCM?

Which service must be running for a phone to receive its configuration file?

Which TWO of the following fields are required when defining a Route Pattern?

Which THREE of the following items are considered part of the 'Cisco Unified Communications Manager' infrastructure redundancy model?

What is the function of 'Cisco Unified Reporting' in a CUCM environment?

You want to ensure that a specific device pool always uses a G.729 codec for inter-site calls. What is the most effective approach?

What is the purpose of the 'Common Device Configuration' in CUCM?

Which object acts as the primary container for a specific set of users in CUCM?

You are designing a dial plan with a centralized PSTN egress. What must you configure to ensure that local extensions can be dialed directly across sites?

Which service must be active for CTI applications (like Cisco Finesse) to control phones?

You are migrating to a new SIP provider. You have a requirement to use 'Early Offer' for all calls on this trunk. Where is this configured?

Which field in a Route Pattern can be used to discard the first few digits of a dialed number before routing?

A user reports that they cannot hold an active call when the Media Resource Group List (MRGL) is configured with a specific Transcoder. The CUCM trace shows 'Allocation Failure'. What is the most likely cause?

When configuring a Device Pool in CUCM, which parameter is responsible for defining the set of codecs used between devices in different regions?

You are troubleshooting a scenario where internal calls between two sites are failing. The call fails immediately when dialed. What is the most effective way to verify that the Calling Search Space (CSS) has access to the destination partition?

You need to implement redundancy for a remote site using Survivable Remote Site Telephony (SRST). Which parameter in the Device Pool ensures that the phones fail over to the local router during a CUCM WAN outage?

Which CUCM service must be activated in Serviceability to allow for the use of the 'Cisco Extension Mobility' feature?

You are implementing a 'Call Hunt' sequence. You want to ensure that if no agent answers within 20 seconds, the call moves to the next member in the list. Which configuration object manages this timer?

Which CUCM feature allows an administrator to automatically register new phones using a pre-defined device template?

An administrator needs to restrict a group of phones from making long-distance calls. Which component of the CUCM dial plan should be modified to achieve this while maintaining internal dialing?

What is the default behavior of CUCM when a phone is moved to a new site and registers with the local CUCM node, but the Device Pool is not updated?

You are configuring a 'Route List'. If all the 'Route Groups' within the list are busy, what is the default behavior of the CUCM call routing engine?

Which protocol is used by IP phones to register with the Cisco Unified Communications Manager?

You have implemented 'Local Route Group' in your dial plan. What is the main advantage of using this instead of static Route Groups?

Which menu path in CUCM Administration is used to configure the 'Cisco Unified Communications Manager Group'?

When using 'Call Pickup', how does a user pick up a call that is ringing on another phone in the same pickup group?

You need to ensure that an encrypted call is established between two phones. Which component must be properly configured for 'Mixed Mode' to support secure media (SRTP)?

You want to implement 'Presence' so users can see the status of other users. Which service must be running on the IM and Presence server?

When adding a new phone, what is the 'Device Name' parameter based on by default?

You have a requirement to play a custom announcement when a call is placed on hold. Where do you configure this?

A user is unable to use their 'Speed Dial' button. What is the first thing you should verify?

Which TWO actions are required to successfully add a new media resource, such as a Conference Bridge, to CUCM?

Which TWO settings in the SIP Profile are crucial for interworking with a PSTN gateway that does not support PRACK?

Which THREE steps are involved in the 'Cisco Unified Communications Manager' disaster recovery process?

Which TWO features are managed by the 'Cisco Unified Serviceability' tool?

Which THREE components are part of the CUCM redundancy architecture?

Which THREE parameters are affected when you change the 'Location' of a device?

Which THREE types of media resources can be managed by an MRGL?

Which TWO actions help secure the communication between the CUCM and the IP phones?

Which TWO items are required to configure an 'Application Dial Rule'?