Cisco · Free Practice Questions · Last reviewed May 2026
42 original exam-style questions organised by domain, each with the correct answer highlighted and a plain-English explanation of why it's right — and why the others are wrong.
A help desk technician receives a ticket from a remote user stating that they cannot access internal corporate resources via the VPN client, although their internet browsing works fine. The technician notices the user's remote subnet overlaps with the corporate internal subnet. Which troubleshooting step resolves this routing conflict?
Restart the local firewall service on the user machine to flush existing dynamic routing tables.
Instruct the user to switch their physical Ethernet cable to a different port on their home router.
Reconfigure the remote user's home network subnet scheme to prevent IP address overlapping with the corporate network.
Reconfiguring the home subnet removes the address overlap that causes the VPN client to route corporate-bound traffic locally instead of through the tunnel. Because the remote subnet duplicates corporate ranges, the routing table cannot distinguish destinations, so changing the home scheme restores correct tunnel routing.
Flush the local DNS cache using the ipconfig /flushdns command on the user workstation.
Refer to the exhibit. Based on the Spanning Tree Protocol output for VLAN 10, is this switch acting as the root bridge?
Yes, because the bridge priority is set to the default value of 32768.
No, because the local Bridge ID address (aabb.ccdd.eeff) does not match the Root ID address (0011.2233.4455).
The root bridge is identified by the lowest Bridge ID, and this switch's own Bridge ID differs from the advertised Root ID. It therefore forwards towards another bridge rather than acting as root for VLAN 10.
Yes, because the local port GigabitEthernet0/1 is actively forwarding traffic toward the root path.
No, because the Hello Time is set to 2 seconds instead of the standard IEEE default of 1 second.
A user calls the help desk because they are unable to install a new productivity application on their corporate laptop. Which task is most appropriate for a Tier 1 support technician to perform first in this scenario?
Initiate a physical hardware replacement for the user's laptop.
Redesign the network architecture to allow unauthorized software traffic.
Verify the user's permissions and follow a documented installation script.
Initial troubleshooting of software installation issues is a standard responsibility for Tier 1 technicians who follow established scripts and knowledge base articles. Most common application errors can be resolved through basic configuration checks, clearing cache files, or reinstalling the software package, making it an ideal task for the entry-level support tier.
Perform deep-packet inspection for forensic security analysis.
An organization has a Service Level Agreement (SLA) that requires 'Critical' tickets to be resolved within 4 hours. A technician receives a ticket for a single printer failure in a department with five other working printers. How should the technician categorize this ticket?
Categorize as Critical because any hardware failure is a high priority.
Categorize as Low or Medium because there is no immediate work stoppage.
The availability of five other functional printers means the business process can continue with minimal disruption, justifying a lower priority level. This allows the help desk to allocate resources to more pressing issues while still acknowledging that the printer requires eventual repair or replacement according to standard operating procedures.
Categorize as High to ensure the user is impressed with IT response times.
Categorize as Urgent because the user is a department manager.
A technician is preparing to provide remote assistance to a user on a different subnet. Which TWO security practices are most important when using remote desktop tools? (Choose two.)
Ensure the remote session is encrypted using protocols like TLS.
Encryption prevents unauthorized third parties from intercepting sensitive data, such as login credentials or confidential documents, during the remote support session over the network. Without TLS or similar protections, the technical traffic between the technician and the user could be captured by malicious actors residing on the same or intermediate network paths.
Disable the user's firewall completely to allow all incoming traffic.
Require the user to manually accept the remote connection request.
Obtaining explicit user consent before taking control of a workstation is a fundamental privacy and security requirement in most corporate IT environments. It ensures that the user is aware of the technician's actions and prevents 'shadow IT' or unauthorized monitoring, which could lead to significant legal and compliance issues for the organization.
Use the same generic password for all remote administrative accounts.
Share the technician's personal login credentials with the user.
After resolving a complex connectivity issue for a user, why is it essential for the technician to document the specific steps taken in the ticketing system?
To increase the total word count and make the ticket look professional.
To hide the mistakes made during the initial troubleshooting phase.
To provide a searchable solution for other technicians facing similar issues.
Recording the resolution steps creates a valuable resource that allows other team members to solve identical problems more quickly in the future. This practice contributes to a growing internal knowledge base, reducing the need for repetitive research and allowing the help desk to maintain high performance and consistent service quality.
To ensure the user is billed for every minute the technician worked.
Want more Help Desk practice?
Practice this domainA network administrator needs to connect a workstation to a switch port. The link must be configured to prevent loops while ensuring high availability. Which technology should be implemented on the switch port to immediately transition the port to the forwarding state upon connection?
BPDU Guard
Root Guard
PortFast
PortFast allows an access port to immediately move from the blocking state directly to the forwarding state. This prevents DHCP timeouts that occur when switches take too long to transition ports during the listening and learning phases of the Spanning Tree Protocol, ensuring quick host connectivity.
EtherChannel
Refer to the exhibit. An administrator is troubleshooting a link between two switches. The status shows 'up' but the protocol is 'down'. What is the most likely cause?
The cable is unplugged
Layer 2 configuration mismatch
The up/down state indicates a Layer 2 protocol failure. Common causes include mismatched encapsulation types on trunk ports or native VLAN mismatches, which prevent the switches from correctly interpreting the frames being sent across the physical link, keeping the line protocol in a down state.
The port is administratively shut down
The IP address is not configured
Which OSI layer is primarily responsible for end-to-end communication, flow control, and error correction of data segments?
Data Link Layer
Network Layer
Transport Layer
The Transport Layer (Layer 4) manages the end-to-end communication stream. It breaks data into segments, performs flow control to prevent congestion, and uses sequence numbers and acknowledgments to ensure that segments are received correctly and in the proper order by the receiving host application.
Session Layer
Which THREE of the following are primary functions of a router in a modern enterprise network? (Choose three.)
Path determination
Routers examine the destination IP address of incoming packets and consult their routing table to determine the best path to forward the traffic toward the destination network, which is the primary function of Layer 3 devices in any network architecture.
Logical addressing
Routers connect multiple distinct networks together, and they rely on logical addressing (IP) to differentiate between hosts located on different subnets, allowing them to route traffic effectively based on the IP address hierarchy rather than physical hardware identifiers like MAC addresses.
Switching frames
Network segmentation
Routers segment the network into smaller, manageable broadcast domains. By preventing broadcast traffic from crossing from one interface to another, routers improve overall network efficiency and security, ensuring that broadcast storms are isolated to the specific subnet where they originated.
MAC address learning
A user reports that they cannot access the internet, but they can ping the default gateway of their local subnet. What is the most likely cause of the issue?
The NIC is disabled
The local IP address is incorrect
The router has no route to the destination
If the user can reach the gateway but not the internet, it indicates the traffic is reaching the router, but the router does not know how to forward it further, or the next-hop ISP connection is down, preventing internet access from being successfully established.
The switch port is blocked by PortFast
Refer to the exhibit. A router is unable to reach any external networks. Based on the output, what is the most likely configuration error?
The interfaces are down
Missing default route
The output explicitly states that the 'Gateway of last resort is not set.' This confirms that no default route (0.0.0.0/0) has been configured. Without a gateway of last resort, the router cannot forward traffic destined for any network not explicitly defined in its routing table.
IP address conflict
Routing protocol failure
Want more Networking and Network Connectivity practice?
Practice this domainA user reports that their macOS device is unable to access a specific network share. You need to verify if the file sharing protocol is active without using the GUI. Which command-line utility should you use?
nfsstat
arp -a
smbutil
This utility is specifically designed to manage and query SMB connections on macOS systems. It allows technicians to list mounted shares, check connection status, and perform diagnostic tests. It is the primary tool for verifying connectivity to Windows file servers or NAS devices from a Terminal interface.
netstat
You are troubleshooting a macOS user who cannot install a signed application due to Gatekeeper security settings. Which TWO actions can you perform to resolve this while maintaining security best practices? (Choose two)
Enable the 'Allow apps downloaded from Anywhere' option in Privacy & Security settings.
Run 'spctl --add --label "Approved" /path/to/app' in Terminal.
This command allows a technician to explicitly add an application to the assessment database. This is a secure and granular method to bypass Gatekeeper for a specific piece of software while leaving the global security policy intact, which is preferred for managing corporate-approved software installs.
Right-click the application icon and select 'Open' to trigger the security override dialog.
This user-friendly method allows an administrator to manually bypass Gatekeeper for a specific signed application. It is considered a best practice because it requires a deliberate, manual action, effectively recording the user's intent to run a specific application without disabling system-wide protection mechanisms permanently.
Reinstall the macOS operating system to reset the security policy database.
Modify the /etc/sudoers file to grant the user elevated privileges.
Which keyboard shortcut is used to open the 'Force Quit' applications dialog on a macOS system?
Command + Option + Escape
This specific combination is the standard macOS keyboard shortcut for invoking the Force Quit Applications dialog. It is a critical, universally supported keyboard sequence that provides a safe and reliable way for users to end unresponsive processes without risking data integrity or the stability of other apps.
Control + Alt + Delete
Command + Shift + Q
Option + Command + P + R
A user is complaining that their Mac is running slowly. You want to check which processes are consuming the most CPU resources using the Terminal. Which command should you use?
ps -aux
top
The 'top' command is the industry-standard tool for displaying real-time system metrics, including CPU utilization, memory consumption, and active process lists. It is the most appropriate command for observing fluctuations in performance and identifying problematic applications that may be hogging system resources in real-time.
vmstat
df -h
Which THREE of the following are valid locations where macOS stores system logs that can be analyzed for troubleshooting? (Choose three)
/var/log
This directory contains traditional system and service logs. While modern macOS uses the Unified Logging system, many legacy services and low-level system processes still write their output here. It remains a primary location for administrators to investigate system-wide events and service-level diagnostics in a standard text-based format.
/Library/Logs
This directory holds logs for system-wide applications and services. It is essential for troubleshooting issues that affect the OS behavior or background daemons. IT support professionals frequently check this location to debug installation failures, service crashes, and other application-related issues that are not specific to a single user.
~/Library/Logs
This user-specific directory stores logs for applications executed by the logged-in user. It is the most important location for troubleshooting application crashes or configuration issues that appear only for a specific user, as these logs capture user-space activity that would not be visible in system-wide logs.
/System/Kernel/Logs
/etc/logs
When a macOS system is failing to boot and you need to perform maintenance from the recovery environment, what is the correct sequence to access macOS Recovery on an Apple Silicon Mac?
Press and hold Command + R during startup.
Press and hold the power button until 'Loading startup options' appears.
This is the documented procedure for accessing Startup Options on Apple Silicon devices. From this screen, a technician can select the Recovery volume, which is necessary for performing system repairs, disk management, and OS reinstallation on modern hardware, ensuring that maintenance can proceed regardless of boot status.
Press and hold the Shift key during startup.
Press and hold the Option key during startup.
Want more macOS practice?
Practice this domainA network administrator needs to prevent unauthorized devices from connecting to a switch port. Which security feature should be implemented to ensure only authorized MAC addresses can communicate through specific interfaces?
DHCP Snooping
Port Security
Port Security allows administrators to define a maximum number of secure MAC addresses for a switch port. By binding specific MAC addresses to a port, the switch can effectively drop traffic from any unknown source, thereby ensuring that only authorized hardware can participate in network communications.
Dynamic ARP Inspection
IP Source Guard
Which protocol provides secure, encrypted remote management of network devices by replacing legacy Telnet?
HTTP
SNMPv1
SSH
SSH serves as the industry-standard protocol for secure remote access. By using public-key cryptography to authenticate the remote computer and the user, it ensures that all data exchanged between the client and the switch or router remains encrypted and protected from eavesdropping.
Telnet
Refer to the exhibit. What is the effect of this configuration on interface Gi0/1?
The port remains active but drops traffic from unknown MAC addresses.
The port shuts down if more than one device attempts to connect.
With the maximum set to 1 and the violation mode set to shutdown, the switch detects the violation as soon as a second unauthorized MAC address is seen. The interface then moves to an error-disabled state, effectively disconnecting the port to protect the network from unauthorized devices.
The port restricts traffic to only the first device detected and logs the event.
The port will reset every time a new MAC address is detected.
Which TWO of the following are considered best practices for securing physical access to network infrastructure? (Choose two.)
Disabling all unused switch ports.
Disabling unused ports is a critical security measure because it prevents unauthorized individuals from plugging devices into the network at wall jacks or switch closets. By setting ports to 'shutdown', the administrator ensures that no traffic can be forwarded through those interfaces without explicit re-enablement.
Using the default VLAN for all user traffic.
Placing networking equipment in locked, restricted-access rooms.
Restricting physical access to network closets and server rooms is the primary defense against hardware-level attacks. By ensuring only authorized personnel have keys or badge access, you significantly reduce the risk of attackers connecting rogue devices or performing physical console-based resets on critical infrastructure hardware.
Keeping the default 'cisco' password on all devices.
Enabling Telnet on all devices for easier management.
Which mechanism is used by Cisco routers to prevent spoofed IP packets from entering the network by verifying the source address against the routing table?
Port Security
uRPF
uRPF checks the source IP address of incoming packets against the routing table. If the packet arrives on an interface that the router would not use to reach the source IP, the packet is considered spoofed and dropped, effectively preventing IP address spoofing and source-based attacks.
DHCP Snooping
ACLs
An organization wants to authenticate users connecting to the network using a centralized server. Which protocol allows for secure communication between the network access device and the authentication server?
SNMP
RADIUS
RADIUS provides a robust framework for AAA. It encrypts the password portion of the communication between the network access device and the server, ensuring that credentials are not transmitted in cleartext. This makes it the preferred protocol for secure, centralized user authentication in enterprise networks.
Telnet
HTTP
Want more Security practice?
Practice this domainA user reports that their Windows 10 workstation is experiencing slow performance and intermittent application crashes. Upon checking the Event Viewer, you notice a high frequency of Event ID 1001 errors. Which built-in Windows utility should you use to generate a comprehensive report on the system's overall health and identify specific resource bottlenecks?
Task Manager
System Configuration (msconfig)
Performance Monitor
Performance Monitor allows the execution of data collector sets, specifically the System Diagnostics report. This captures a comprehensive view of system health, including detailed logs of hardware components and software performance, which is exactly what a technician needs to identify the root cause of systemic performance degradation.
Resource Monitor
You are configuring a Windows 10 Pro workstation for a remote user. You need to ensure that the user can access network shares while maintaining security. Which TWO of the following tasks should you perform to adhere to standard security best practices?
Enable Everyone access on all shares
Disable Network Discovery for public profiles
Disabling Network Discovery on public network profiles is a critical security step that prevents the workstation from being visible to other devices on potentially untrusted networks. This minimizes the attack surface by ensuring the machine does not advertise its services or files to unauthorized parties.
Configure NTFS permissions for specific users
NTFS permissions provide the most granular level of security by allowing administrators to define exactly which users or groups can read, write, or modify files. Unlike share permissions, NTFS permissions persist even if the file is moved locally, providing robust data protection across the system.
Use HomeGroup for network connectivity
Disable the Windows Firewall
When managing Windows updates for a small business environment, which THREE actions should you take to ensure system stability while maintaining security?
Disable Windows Update entirely to prevent reboots
Deploy updates to a test group before broad release
Testing updates on a representative subset of workstations before a full-scale deployment allows you to identify compatibility issues or bugs. This 'pilot' phase protects the wider organization from potentially unstable updates, ensuring that critical business applications remain functional after the deployment of new software patches.
Configure deferral periods for feature updates
Deferring feature updates allows businesses to delay the installation of major version changes until they have been thoroughly vetted. This ensures that new features do not disrupt established workflows or break proprietary software, providing a stable environment while still allowing for the timely deployment of security patches.
Use Windows Update for Business to manage policies
Windows Update for Business provides the necessary infrastructure to control update behavior, including scheduling, deferral policies, and branch selection. This ensures that administrators can manage the update lifecycle in a way that aligns with organizational needs, keeping systems secure without sacrificing operational efficiency or stability.
Manually update every machine to ensure success
A Windows workstation is failing to boot and displays a 'Boot Device Not Found' error. You have already verified the hardware cabling. Which command-line tool, when run from the Windows Recovery Environment (WinRE), is most effective for repairing the Master Boot Record (MBR) and the Boot Configuration Data (BCD) store?
chkdsk
bootrec
Bootrec.exe is specifically designed to troubleshoot and repair boot-related issues by interacting with the MBR, the partition boot sector, and the BCD store. It is the industry-standard tool for resolving startup failures where the system cannot find a bootable device or configuration.
sfc
diskpart
You are tasked with securing a Windows workstation. You want to ensure that if the computer is stolen, the data on the hard drive cannot be accessed by unauthorized users. Which technology should you implement?
Windows Defender
BitLocker
BitLocker provides full-volume encryption, ensuring that all data stored on the drive remains encrypted at rest. If the device is stolen, an unauthorized user cannot access the files without the correct recovery key or authentication, making it the definitive solution for protecting data on physical drives.
NTFS Permissions
User Account Control (UAC)
A user is unable to install a required application on their Windows workstation. Upon investigation, you find that the installer requires administrator privileges. Which feature allows you to run the installer with elevated permissions without changing the user's standard account type?
User Account Control (UAC)
Run as administrator
This feature allows a user to execute a specific application or installer with elevated privileges. It is the correct and safest way to perform software installations on a standard user account, ensuring that the user does not have persistent administrative rights that could lead to system damage.
Group Policy Object (GPO)
Compatibility Mode
Want more Windows OS practice?
Practice this domainA network administrator needs to host multiple virtual machines on a single physical Cisco UCS server. Which technology allows these VMs to share the physical NIC while maintaining traffic isolation?
Port Security
Access Control Lists
VLAN Tagging (802.1Q)
802.1Q VLAN tagging inserts a header into Ethernet frames, allowing the virtual switch to map traffic to specific isolated networks. This enables multiple virtual machines to utilize a single physical network interface card while maintaining distinct, secure, and isolated broadcast domains for each specific virtual network segment defined.
DHCP Snooping
Which TWO benefits are provided by implementing Cloud Computing services within a corporate network architecture? (Choose two)
Total ownership of physical hypervisor hardware
Rapid elasticity and scalability
Rapid elasticity allows services to scale up or down automatically based on fluctuating workload demands. This ensures that resources are always available during peak times and costs are minimized during lulls, providing a significant operational advantage over static on-premise hardware deployments that require manual procurement and physical installation.
Complete elimination of local ISP dependencies
Shift from CapEx to OpEx model
Cloud services replace high upfront Capital Expenditures (CapEx) with predictable, monthly Operational Expenditures (OpEx). This allows businesses to convert large hardware investments into manageable operating costs, facilitating better cash flow and allowing companies to experiment with new technologies without the significant risk of purchasing long-term physical equipment assets.
Automatic removal of all security threats
Refer to the exhibit. A remote user is reporting slow performance when accessing internal resources via Cisco AnyConnect. Based on the CLI output, what can be determined about the connection status?
The user is connected via a standard IPsec tunnel only
The session is failing because DTLS is in a standby state
The connection is successfully using DTLS for traffic transport
The 'DTLS: Active' status confirms that the client is successfully using Datagram Transport Layer Security. This is the optimal configuration for AnyConnect as it minimizes latency by avoiding the retransmission overhead inherent in TCP. The performance issue must therefore be investigated outside of the VPN transport layer configuration itself.
The encryption method is causing the reported latency
Which cloud service model provides the customer with control over the operating system, applications, and storage, but leaves the physical hardware management to the provider?
SaaS
PaaS
IaaS
Infrastructure as a Service (IaaS) provides the highest level of flexibility and management control. The customer is responsible for managing the operating system, applications, and network configuration within the virtualized instance, while the cloud provider ensures the underlying physical servers, storage arrays, and network fabric are fully operational and secure.
DaaS
An organization is deploying a hybrid cloud strategy. What is the primary purpose of a cloud connector in this environment?
To increase the physical RAM on the local server
To provide a secure bridge between on-premise and public clouds
The cloud connector acts as a secure gateway or tunnel, ensuring that traffic between the private and public clouds is encrypted and authenticated. It allows the enterprise to extend its internal network policies and identity services into the public cloud, creating a unified hybrid environment that is manageable and secure.
To replace the need for a firewall at the network edge
To cache all web traffic for faster Internet browsing
Which THREE characteristics are defining features of virtualization in a Cisco data center environment? (Choose three)
Isolation of virtual machine resources
Isolation ensures that one virtual machine cannot interfere with or access the memory and CPU of another. This is a fundamental security and stability feature of virtualization, allowing multiple diverse applications to run on the same physical host without compromising the integrity or performance of other co-hosted virtual systems.
Increased dependence on physical hardware swaps
Consolidation of physical servers
Consolidation allows organizations to run multiple workloads on a single physical server, significantly reducing space, power, and cooling requirements. By maximizing the utilization of available hardware, companies can achieve higher efficiency and lower capital expenditures compared to a traditional 'one application per server' hardware deployment model in the data center.
Abstraction of the hardware layer
Abstraction creates a layer between the hardware and the OS. This allows the OS to interact with a virtualized set of drivers rather than specific physical components. This abstraction is what enables portability, allowing virtual machines to be moved between different physical servers without needing to change OS-level configurations or drivers.
Requirement for dedicated physical switches per VM
Want more Virtualization, Cloud, and Remote Access practice?
Practice this domainA network administrator needs to connect a Cisco Catalyst switch to a server using a fiber optic link that supports 10 Gbps speeds over a distance of 10 kilometers. Which transceiver type should be selected?
10GBASE-SR
10GBASE-T
10GBASE-LR
The LR designation stands for Long Reach and utilizes 1310nm lasers to achieve 10 Gbps over single-mode fiber up to 10 kilometers. It is the industry standard for campus-wide or metropolitan area connections where distance requirements exceed standard multi-mode capabilities while maintaining high throughput.
10GBASE-ER
Which component of a Cisco router is responsible for storing the startup configuration file?
RAM
NVRAM
NVRAM is specifically designed to be non-volatile, meaning it maintains data without needing a constant power source. This makes it the standard location for the startup configuration file, ensuring that the router boots with the saved settings every time it is power-cycled or reloaded by an administrator.
Flash
ROM
Refer to the exhibit. A technician observes that Gi0/2 is in an err-disabled state. What is the most likely cause?
The cable is unplugged.
Port Security violation.
Port Security is a common reason for a port to enter the err-disabled state. If a device with an unauthorized MAC address attempts to connect, the switch shuts down the port to prevent potential network threats or unauthorized access to the local area network segments.
The interface is administratively down.
The switch is in ROMMON mode.
Which TWO of the following statements correctly describe the characteristics of PoE (Power over Ethernet) as implemented in Cisco environments? (Choose two.)
PoE+ (802.3at) provides up to 30W of power at the PSE.
The 802.3at standard, known as PoE+, was developed to support higher power requirements for devices like pan-tilt-zoom cameras and high-performance access points. It ensures that up to 30 watts are available at the switch port, providing enough overhead for cable resistance losses across the Ethernet link.
PoE is only compatible with Cat 3 cabling.
Switches use LLDP to negotiate power requirements.
The Link Layer Discovery Protocol is used to communicate precise power needs between the powered device and the power sourcing equipment. This dynamic negotiation allows the switch to allocate power more efficiently across ports, optimizing the total power budget available to all connected devices on the switch.
PoE is limited to a maximum distance of 500 meters.
PoE requires a separate power cable for every device.
When inspecting a Cisco router's internal components, which hardware component provides the initial instructions to the hardware to begin the bootstrap process?
Flash Memory
NVRAM
ROM
ROM holds the microcode responsible for hardware initialization, power-on self-test (POST), and the instruction to load the IOS from flash or a network source. This is the first piece of code executed by the router to ensure that all internal components are functioning correctly before loading the OS.
RAM
Which cable type is typically used for a console connection between a technician's laptop and a Cisco network device?
Crossover cable
Rollover cable
The rollover cable, also known as a console cable, features a pinout that is reversed on one end compared to the other. This specific wiring is essential for the serial communication required to interact with the device's command-line interface directly from an external management terminal or laptop.
Straight-through cable
Fiber optic patch cord
Want more Hardware practice?
Practice this domainThe vendor does not publish an exact question count for the 100-140; the exam lasts 50 minutes. Always confirm current details on the vendor's official exam page.
CLI output interpretation, network topology analysis, routing behaviour, switching concepts, troubleshooting, and configuration questions.
The exam covers 7 domains: Help Desk, Networking and Network Connectivity, macOS, Security, Windows OS, Virtualization, Cloud, and Remote Access, Hardware. Questions are weighted by domain — higher-weight domains appear more on your actual exam.
No. These are original exam-style practice questions written against the official Cisco 100-140 exam objectives. They are not copied from the real exam. Courseiva focuses on genuine understanding, not memorisation of braindumps.
Courseiva tracks your accuracy per domain and routes you toward weak areas automatically. Free, no account required.