350-501 Automation and Quality of Services — All Questions With Answers

In the DiffServ model, which DSCP value is used for Expedited Forwarding (EF) to support voice traffic?

Question 2mediummultiple choice

An SP engineer is configuring hierarchical QoS on a PE router to enforce a per-subscriber bandwidth contract of 10 Mbps and prioritize voice within that contract. Which MQC configuration sequence is correct?

Question 3hardmultiple choice

In an SP MPLS core, a PE router maps incoming DSCP values to MPLS EXP bits. Which statement about EXP marking is accurate when using the DiffServ Tunneling Model?

Question 4mediummultiple choice

An SP network uses NSO for service orchestration. Which component in NSO provides the abstraction layer to communicate with different device types using protocols like NETCONF or CLI?

Question 5mediummultiple choice

Read the full Automation and Quality of Services explanation →

When using NETCONF to edit a running configuration on a Cisco IOS XR router, which sequence of operations is correct?

Question 6hardmultiple choice

In SR-TE PCE, which protocol does the PCE use to communicate with the PCC (Path Computation Client) to set up LSPs?

Question 7easymultiple choice

Read the full Automation and Quality of Services explanation →

What is the primary difference between traffic policing and traffic shaping?

Question 8mediummultiple choice

An SP engineer is implementing LLQ on a PE router to prioritize voice. Which additional configuration is recommended to prevent voice traffic from starving other queues?

Question 9mediummultiple choice

In the context of YANG modeling for network automation, which statement about 'must' expressions is true?

Question 10hardmultiple choice

An SP uses NSO with a YANG service model to provision an L3VPN. The service model references a leafref to a VPN ID that must exist in a separate list. Which YANG statement ensures the leafref value is valid against the referenced list?

Question 11easymultiple choice

Which MQC component is used to match traffic based on criteria such as DSCP or IP precedence?

Question 12mediummultiple choice

An SP router is configured with CBWFQ. For a data class requiring 30% bandwidth guarantee, which command is correct in the policy-map?

Question 13mediummulti select

Read the full Automation and Quality of Services explanation →

An SP engineer is implementing DSCP classification at the edge. Which two AF classes are typically used for mission-critical data? (Choose two.)

Question 14hardmulti select

When automating service provisioning with NSO, which three components are part of the NSO architecture? (Choose three.)

Question 15mediummulti select

Which two HTTP methods are used in RESTCONF to retrieve configuration data? (Choose two.)

Question 16easymultiple choice

Which DSCP value is recommended for Expedited Forwarding (EF) per-hop behavior, commonly used for voice traffic?

Question 17mediummultiple choice

A service provider wants to enforce a hard rate limit of 10 Mbps on a subscriber's traffic, dropping any excess packets. Which QoS mechanism should be used?

Question 18hardmultiple choice

In an SP network using NSO for service orchestration, which component abstracts device-specific CLI or SNMP interactions into a common model for NETCONF/RESTCONF southbound communication?

Question 19mediummultiple choice

Which NETCONF RPC is used to retrieve the complete running configuration from a network device?

Question 20mediummultiple choice

A service provider is implementing hierarchical QoS on an edge router. The goal is to shape the aggregate traffic to 100 Mbps and then apply different queuing policies for voice and data within that shaped pipe. Which configuration approach is correct?

Question 21easymultiple choice

Read the full Automation and Quality of Services explanation →

In the MQC (Modular QoS CLI) framework, which component is used to match traffic based on DSCP values?

Question 22mediummultiple choice

An SP network operator needs to ensure that voice traffic always gets priority access to the output link. Which queuing mechanism is designed to provide a strict priority queue while preventing starvation of other queues?

Question 23hardmultiple choice

Read the full Automation and Quality of Services explanation →

In SR-PCE architecture, which protocol is used for communication between the Path Computation Element (PCE) and the Path Computation Client (PCC) to request and report SR-TE paths?

Question 24easymultiple choice

When DSCP markings are mapped to MPLS EXP bits at the ingress PE router, how many EXP values are available for traffic differentiation in the MPLS core?

Question 25mediummultiple choice

Read the full Automation and Quality of Services explanation →

A service provider is designing a QoS policy for a business VPN service that carries voice, video, and data. The policy must ensure that voice (EF) is never dropped even during congestion, while video (AF41) and data (AF21) share the remaining bandwidth in a ratio 2:1. Which queuing strategy should be used?

Question 26hardmultiple choice

In NSO, which statement best describes the function of the CDB (Configuration Database)?

Question 27mediummultiple choice

Read the full Automation and Quality of Services explanation →

Which congestion avoidance mechanism is used to prevent tail drop by selectively dropping packets from lower-priority flows before the queue becomes full?

Question 28mediummulti select

A service provider wants to use NETCONF to manage devices. Which two statements are true about NETCONF operations? (Choose two.)

Question 29hardmulti select

Which three mechanisms are used within the DiffServ model to provide QoS in an SP network? (Choose three.)

Question 30mediummulti select

An SP engineer is configuring a policy-map to implement hierarchical QoS. Which two statements are correct when using MQC for hierarchical QoS? (Choose two.)

Question 31mediummultiple choice

A service provider is deploying a QoS policy for a customer with voice, mission-critical data, and best-effort traffic. The voice requires strict priority and low latency. Which queuing mechanism should be used to ensure voice packets are always served before other queues, and what additional measure is necessary to prevent voice traffic from starving other traffic?

Question 32easymultiple choice

In the DiffServ model, which DSCP value is used for Voice over IP (VoIP) traffic to ensure Expedited Forwarding (EF) per-hop behavior?

Question 33hardmultiple choice

Read the full Automation and Quality of Services explanation →

An SP network engineer needs to implement hierarchical QoS on a PE router to shape customer traffic to a contracted rate of 10 Mbps while providing priority for voice traffic and bandwidth guarantee for critical data. Which MQC configuration correctly achieves this?

Question 34mediummultiple choice

In SP automation, which protocol is used by NSO to communicate with network devices for configuration management?

Question 35mediummultiple choice

Read the full Automation and Quality of Services explanation →

An SP uses traffic policing and shaping to manage bandwidth. Which statement best describes the difference between the two mechanisms?

Question 36easymultiple choice

Read the full Automation and Quality of Services explanation →

In the context of MPLS QoS, at which point are EXP bits typically set based on the DSCP value of the IP packet?

Question 37hardmultiple choice

An SP uses SR-PCE for traffic engineering. Which protocol does the SR-PCE use to communicate path computation requests and responses with path computation clients (PCCs)?

Question 38mediummultiple choice

In the DiffServ model, which per-hop behavior (PHB) is associated with the AF31 DSCP value?

Question 39mediummultiple choice

Which YANG data modeling construct is used to restrict a leaf value to be a reference to another leaf in the data tree?

Question 40easymultiple choice

In the Modular QoS CLI (MQC), which component is used to define traffic classes based on match criteria?

Question 41hardmultiple choice

An SP engineer is designing a QoS policy for a customer with three traffic classes: voice (priority), premium data (bandwidth guarantee), and best effort. The total bandwidth is 10 Mbps, with voice limited to 1 Mbps, premium data to 4 Mbps, and best effort to the remaining. Which policy-map configuration correctly uses LLQ and CBWFQ?

Question 42mediummultiple choice

Which RESTCONF HTTP method is used to create a new data resource?

Question 43mediummulti select

Read the full Automation and Quality of Services explanation →

Which two statements correctly describe the use of DSCP values in the DiffServ model? (Choose two.)

Question 44hardmulti select

Which three components are part of NSO (Network Services Orchestrator) architecture? (Choose three.)

Question 45mediummulti select

Which two mechanisms are used for congestion avoidance in a QoS policy? (Choose two.)

Question 46easymultiple choice

A service provider is implementing QoS for voice traffic using the DiffServ model. Which DSCP value should be assigned to voice packets to ensure the highest priority treatment?

Question 47mediummultiple choice

An SP engineer is configuring hierarchical QoS on a PE router. The parent policy shapes the traffic to 10 Mbps, and the child policy applies LLQ for voice and CBWFQ for data. What is the primary purpose of using policing within the LLQ child policy?

Question 48mediummultiple choice

In MPLS networks, the EXP bits are used for QoS. How are the 3-bit EXP values typically derived from DSCP markings at the ingress PE router?

Question 49hardmultiple choice

An SP uses NSO for service orchestration. A new service requires YANG data validation to ensure that the 'bandwidth' leaf does not exceed 10000 kbps when the 'service-type' is 'premium'. Which YANG statement is appropriate?

Question 50easymultiple choice

Read the full Automation and Quality of Services explanation →

Which NETCONF operation is used to retrieve the entire running configuration from a network device?

Question 51mediummultiple choice

An SP is deploying SR-TE policies using PCEP. What is the role of the SR-PCE in this architecture?

Question 52mediummultiple choice

An engineer configures a class-map to match traffic with DSCP AF41. What is the numerical DSCP value for AF41?

Question 53hardmultiple choice

Read the full Automation and Quality of Services explanation →

In a hierarchical QoS policy, the parent policy shapes to 20 Mbps. The child policy has a class for voice with priority and police rate 2 Mbps, and a class for data with bandwidth 10 Mbps. What is the maximum bandwidth voice traffic can consume under congestion?

Question 54easymultiple choice

What is the primary function of the NED (Network Element Driver) in NSO?

Question 55mediummultiple choice

Which RESTCONF HTTP method should be used to replace the entire configuration of a device interface?

Question 56hardmultiple choice

Read the full Automation and Quality of Services explanation →

An SP network experiences congestion on a core link. The QoS policy uses CBWFQ with classes for voice (LLQ), video (bandwidth 30%), and data (bandwidth 50%). During congestion, voice traffic spikes to 25% of the link. What happens to video and data traffic?

Question 57easymultiple choice

What is the main difference between traffic shaping and traffic policing?

Question 58mediummulti select

Read the full Automation and Quality of Services explanation →

Which TWO statements correctly describe the DiffServ model? (Choose two.)

Question 59hardmulti select

Read the full Automation and Quality of Services explanation →

An SP is designing MQC policies. Which THREE statements about MQC are true? (Choose three.)

Question 60mediummulti select

Read the full Automation and Quality of Services explanation →

An SP uses NSO for automation. Which TWO protocols can NSO use as southbound interfaces to communicate with network devices? (Choose two.)

Question 61easymultiple choice

Which DSCP value is used for voice traffic (EF) in the DiffServ model?

Question 62mediummultiple choice

Which MPLS EXP bits value is typically mapped from DSCP EF at the ingress PE to maintain voice QoS in an MPLS network?

Question 63mediummultiple choice

An SP is designing a QoS policy for a customer with voice, video, and data traffic. Which queuing mechanism provides a strict priority queue for voice while ensuring other queues do not starve?

Question 64hardmultiple choice

Read the full Automation and Quality of Services explanation →

In a hierarchical QoS policy applied to a subscriber aggregation interface, the parent policy shapes to 100 Mbps and the child policy allocates 50% bandwidth to voice and 50% to data. If voice traffic exceeds 50 Mbps, what happens to the excess?

Question 65easymultiple choice

Which protocol is used by NSO to communicate with network devices for configuration management?

Question 66mediummultiple choice

Read the full Automation and Quality of Services explanation →

An SP engineer is using YANG to model a service. Which statement correctly describes the use of a 'leafref' type?

Question 67mediummultiple choice

In the context of SR-PCE, which protocol does the PCE use to communicate with the path computation client (PCC) to set up SR-TE policies?

Question 68easymultiple choice

Which DSCP value corresponds to Best Effort (DF) per-hop behavior?

Question 69hardmultiple choice

An SP uses NSO with a YANG service model to provision L3VPNs. Which database in NSO stores the configuration and state for all managed devices?

Question 70mediummultiple choice

Read the full Automation and Quality of Services explanation →

What is the primary difference between traffic shaping and policing in a QoS implementation?

Question 71hardmultiple choice

In a CBWFQ policy with LLQ, which statement is true regarding the bandwidth command for non-priority classes?

Question 72easymultiple choice

Read the full Automation and Quality of Services explanation →

Which component in MQC is used to classify traffic based on match criteria?

Question 73mediummulti select

Read the full Automation and Quality of Services explanation →

An SP is implementing DiffServ at the edge router. Which TWO DSCP values are used for AF41 and AF31, respectively? (Choose two.)

Question 74hardmulti select

Which THREE statements are true regarding NSO's NED? (Choose three.)

Question 75mediummulti select

Which TWO methods can RESTCONF use to create a new data resource? (Choose two.)

Question 76mediummultiple choice

An SP is designing a QoS policy for a customer VPN that carries voice, video conferencing, and bulk data. The voice traffic requires low latency, video conferencing requires assured bandwidth, and bulk data should use any remaining bandwidth. Which queuing strategy should be applied on the PE-CE link?

Question 77hardmultiple choice

An SP engineer is configuring hierarchical QoS on a PE router for a subscriber with a 10 Mbps shaped rate. The child policy must guarantee 2 Mbps for voice, 4 Mbps for video, and the rest for data. However, the parent policy shape rate is 10 Mbps. Which configuration ensures proper operation?

Question 78easymultiple choice

Which DSCP value is recommended for Expedited Forwarding (EF) per-hop behavior, commonly used for voice traffic?

Question 79mediummultiple choice

An SP uses NSO to orchestrate MPLS L3VPN services. The service model is written in YANG, and the NED communicates with the PE routers. Which protocol does NSO use to push configuration to the network devices?

Question 80hardmultiple choice

An SP is deploying SR-TE policies using a central controller. The controller needs to compute paths based on bandwidth and latency constraints. Which protocol is used between the controller and the routers to signal the SR-TE policies?

Question 81mediummultiple choice

An SP network engineer is reviewing a QoS configuration on a PE router. The policy-map uses a class for voice with the 'priority' command, and a class for video with 'bandwidth remaining percent 30'. What is the purpose of the 'bandwidth remaining percent' command?

Question 82easymultiple choice

In the DiffServ model, which field is used in the IP header to mark packets for QoS treatment?

Question 83mediummulti select

Read the full Automation and Quality of Services explanation →

An SP engineer is designing a QoS policy for a business customer with three traffic classes: Voice (critical latency), Transactional Data (low delay), and Bulk Data (no strict requirements). The link is 100 Mbps. Which TWO actions should be part of the policy? (Select two.)

Question 84hardmulti select

An SP is deploying a Network Services Orchestrator (NSO) for service automation. Which THREE components are integral to NSO architecture? (Select three.)

Question 85mediummulti select

An SP is implementing traffic shaping on an MPLS PE-CE link. Which TWO statements are true about shaping compared to policing? (Select two.)

Question 86easymulti select

Which THREE DSCP values are part of the Assured Forwarding (AF) class 4? (Select three.)

Question 87mediummulti select

Read the full Automation and Quality of Services explanation →

An SP is using MQC to configure QoS on a core router. Which TWO statements about MQC are correct? (Select two.)

Question 88hardmulti select

An SP is deploying SR-PCE for centralized traffic engineering. Which THREE functions does the PCE perform? (Select three.)

Question 89mediummulti select

Read the full Automation and Quality of Services explanation →

An SP engineer is configuring QoS on a PE router for MPLS traffic. The core network uses MPLS EXP bits for QoS. Which TWO methods can be used to set MPLS EXP bits based on IP DSCP? (Select two.)

Question 90easymulti select

Which THREE of the following are standard per-hop behaviors (PHBs) in the DiffServ model? (Select three.)

Question 1easymultiple choice

In the DiffServ model, which DSCP value is used for Expedited Forwarding (EF) to support voice traffic?

Question 2mediummultiple choice

An SP engineer is configuring hierarchical QoS on a PE router to enforce a per-subscriber bandwidth contract of 10 Mbps and prioritize voice within that contract. Which MQC configuration sequence is correct?

Question 3hardmultiple choice

In an SP MPLS core, a PE router maps incoming DSCP values to MPLS EXP bits. Which statement about EXP marking is accurate when using the DiffServ Tunneling Model?

Question 4mediummultiple choice

An SP network uses NSO for service orchestration. Which component in NSO provides the abstraction layer to communicate with different device types using protocols like NETCONF or CLI?

Question 5mediummultiple choice

Read the full Automation and Quality of Services explanation →

When using NETCONF to edit a running configuration on a Cisco IOS XR router, which sequence of operations is correct?

Question 6hardmultiple choice

In SR-TE PCE, which protocol does the PCE use to communicate with the PCC (Path Computation Client) to set up LSPs?

Question 7easymultiple choice

Read the full Automation and Quality of Services explanation →

What is the primary difference between traffic policing and traffic shaping?

Question 8mediummultiple choice

An SP engineer is implementing LLQ on a PE router to prioritize voice. Which additional configuration is recommended to prevent voice traffic from starving other queues?

Question 9mediummultiple choice

In the context of YANG modeling for network automation, which statement about 'must' expressions is true?

Question 10hardmultiple choice

An SP uses NSO with a YANG service model to provision an L3VPN. The service model references a leafref to a VPN ID that must exist in a separate list. Which YANG statement ensures the leafref value is valid against the referenced list?

Question 11easymultiple choice

Which MQC component is used to match traffic based on criteria such as DSCP or IP precedence?

Question 12mediummultiple choice

An SP router is configured with CBWFQ. For a data class requiring 30% bandwidth guarantee, which command is correct in the policy-map?

Question 13mediummulti select

Read the full Automation and Quality of Services explanation →

An SP engineer is implementing DSCP classification at the edge. Which two AF classes are typically used for mission-critical data? (Choose two.)

Question 14hardmulti select

When automating service provisioning with NSO, which three components are part of the NSO architecture? (Choose three.)

Question 15mediummulti select

Which two HTTP methods are used in RESTCONF to retrieve configuration data? (Choose two.)

Question 16easymultiple choice

Which DSCP value is recommended for Expedited Forwarding (EF) per-hop behavior, commonly used for voice traffic?

Question 17mediummultiple choice

A service provider wants to enforce a hard rate limit of 10 Mbps on a subscriber's traffic, dropping any excess packets. Which QoS mechanism should be used?

Question 18hardmultiple choice

In an SP network using NSO for service orchestration, which component abstracts device-specific CLI or SNMP interactions into a common model for NETCONF/RESTCONF southbound communication?

Question 19mediummultiple choice

Which NETCONF RPC is used to retrieve the complete running configuration from a network device?

Question 20mediummultiple choice

A service provider is implementing hierarchical QoS on an edge router. The goal is to shape the aggregate traffic to 100 Mbps and then apply different queuing policies for voice and data within that shaped pipe. Which configuration approach is correct?

Question 21easymultiple choice

Read the full Automation and Quality of Services explanation →

In the MQC (Modular QoS CLI) framework, which component is used to match traffic based on DSCP values?

Question 22mediummultiple choice

An SP network operator needs to ensure that voice traffic always gets priority access to the output link. Which queuing mechanism is designed to provide a strict priority queue while preventing starvation of other queues?

Question 23hardmultiple choice

Read the full Automation and Quality of Services explanation →

In SR-PCE architecture, which protocol is used for communication between the Path Computation Element (PCE) and the Path Computation Client (PCC) to request and report SR-TE paths?

Question 24easymultiple choice

When DSCP markings are mapped to MPLS EXP bits at the ingress PE router, how many EXP values are available for traffic differentiation in the MPLS core?

Question 25mediummultiple choice

Read the full Automation and Quality of Services explanation →

A service provider is designing a QoS policy for a business VPN service that carries voice, video, and data. The policy must ensure that voice (EF) is never dropped even during congestion, while video (AF41) and data (AF21) share the remaining bandwidth in a ratio 2:1. Which queuing strategy should be used?

Question 26hardmultiple choice

In NSO, which statement best describes the function of the CDB (Configuration Database)?

Question 27mediummultiple choice

Read the full Automation and Quality of Services explanation →

Which congestion avoidance mechanism is used to prevent tail drop by selectively dropping packets from lower-priority flows before the queue becomes full?

Question 28mediummulti select

A service provider wants to use NETCONF to manage devices. Which two statements are true about NETCONF operations? (Choose two.)

Question 29hardmulti select

Which three mechanisms are used within the DiffServ model to provide QoS in an SP network? (Choose three.)

Question 30mediummulti select

An SP engineer is configuring a policy-map to implement hierarchical QoS. Which two statements are correct when using MQC for hierarchical QoS? (Choose two.)

Question 31mediummultiple choice

A service provider is deploying a QoS policy for a customer with voice, mission-critical data, and best-effort traffic. The voice requires strict priority and low latency. Which queuing mechanism should be used to ensure voice packets are always served before other queues, and what additional measure is necessary to prevent voice traffic from starving other traffic?

Question 32easymultiple choice

In the DiffServ model, which DSCP value is used for Voice over IP (VoIP) traffic to ensure Expedited Forwarding (EF) per-hop behavior?

Question 33hardmultiple choice

Read the full Automation and Quality of Services explanation →

An SP network engineer needs to implement hierarchical QoS on a PE router to shape customer traffic to a contracted rate of 10 Mbps while providing priority for voice traffic and bandwidth guarantee for critical data. Which MQC configuration correctly achieves this?

Question 34mediummultiple choice

In SP automation, which protocol is used by NSO to communicate with network devices for configuration management?

Question 35mediummultiple choice

Read the full Automation and Quality of Services explanation →

An SP uses traffic policing and shaping to manage bandwidth. Which statement best describes the difference between the two mechanisms?

Question 36easymultiple choice

Read the full Automation and Quality of Services explanation →

In the context of MPLS QoS, at which point are EXP bits typically set based on the DSCP value of the IP packet?

Question 37hardmultiple choice

An SP uses SR-PCE for traffic engineering. Which protocol does the SR-PCE use to communicate path computation requests and responses with path computation clients (PCCs)?

Question 38mediummultiple choice

In the DiffServ model, which per-hop behavior (PHB) is associated with the AF31 DSCP value?

Question 39mediummultiple choice

Which YANG data modeling construct is used to restrict a leaf value to be a reference to another leaf in the data tree?

Question 40easymultiple choice

In the Modular QoS CLI (MQC), which component is used to define traffic classes based on match criteria?

Question 41hardmultiple choice

An SP engineer is designing a QoS policy for a customer with three traffic classes: voice (priority), premium data (bandwidth guarantee), and best effort. The total bandwidth is 10 Mbps, with voice limited to 1 Mbps, premium data to 4 Mbps, and best effort to the remaining. Which policy-map configuration correctly uses LLQ and CBWFQ?

Question 42mediummultiple choice

Which RESTCONF HTTP method is used to create a new data resource?

Question 43mediummulti select

Read the full Automation and Quality of Services explanation →

Which two statements correctly describe the use of DSCP values in the DiffServ model? (Choose two.)

Question 44hardmulti select

Which three components are part of NSO (Network Services Orchestrator) architecture? (Choose three.)

Question 45mediummulti select

Which two mechanisms are used for congestion avoidance in a QoS policy? (Choose two.)

Question 46easymultiple choice

A service provider is implementing QoS for voice traffic using the DiffServ model. Which DSCP value should be assigned to voice packets to ensure the highest priority treatment?

Question 47mediummultiple choice

An SP engineer is configuring hierarchical QoS on a PE router. The parent policy shapes the traffic to 10 Mbps, and the child policy applies LLQ for voice and CBWFQ for data. What is the primary purpose of using policing within the LLQ child policy?

Question 48mediummultiple choice

In MPLS networks, the EXP bits are used for QoS. How are the 3-bit EXP values typically derived from DSCP markings at the ingress PE router?

Question 49hardmultiple choice

An SP uses NSO for service orchestration. A new service requires YANG data validation to ensure that the 'bandwidth' leaf does not exceed 10000 kbps when the 'service-type' is 'premium'. Which YANG statement is appropriate?

Question 50easymultiple choice

Read the full Automation and Quality of Services explanation →

Which NETCONF operation is used to retrieve the entire running configuration from a network device?

Question 51mediummultiple choice

An SP is deploying SR-TE policies using PCEP. What is the role of the SR-PCE in this architecture?

Question 52mediummultiple choice

An engineer configures a class-map to match traffic with DSCP AF41. What is the numerical DSCP value for AF41?

Question 53hardmultiple choice

Read the full Automation and Quality of Services explanation →

In a hierarchical QoS policy, the parent policy shapes to 20 Mbps. The child policy has a class for voice with priority and police rate 2 Mbps, and a class for data with bandwidth 10 Mbps. What is the maximum bandwidth voice traffic can consume under congestion?

Question 54easymultiple choice

What is the primary function of the NED (Network Element Driver) in NSO?

Question 55mediummultiple choice

Which RESTCONF HTTP method should be used to replace the entire configuration of a device interface?

Question 56hardmultiple choice

Read the full Automation and Quality of Services explanation →

An SP network experiences congestion on a core link. The QoS policy uses CBWFQ with classes for voice (LLQ), video (bandwidth 30%), and data (bandwidth 50%). During congestion, voice traffic spikes to 25% of the link. What happens to video and data traffic?

Question 57easymultiple choice

What is the main difference between traffic shaping and traffic policing?

Question 58mediummulti select

Read the full Automation and Quality of Services explanation →

Which TWO statements correctly describe the DiffServ model? (Choose two.)

Question 59hardmulti select

Read the full Automation and Quality of Services explanation →

An SP is designing MQC policies. Which THREE statements about MQC are true? (Choose three.)

Question 60mediummulti select

Read the full Automation and Quality of Services explanation →

An SP uses NSO for automation. Which TWO protocols can NSO use as southbound interfaces to communicate with network devices? (Choose two.)

Question 61easymultiple choice

Which DSCP value is used for voice traffic (EF) in the DiffServ model?

Question 62mediummultiple choice

Which MPLS EXP bits value is typically mapped from DSCP EF at the ingress PE to maintain voice QoS in an MPLS network?

Question 63mediummultiple choice

An SP is designing a QoS policy for a customer with voice, video, and data traffic. Which queuing mechanism provides a strict priority queue for voice while ensuring other queues do not starve?

Question 64hardmultiple choice

Read the full Automation and Quality of Services explanation →

In a hierarchical QoS policy applied to a subscriber aggregation interface, the parent policy shapes to 100 Mbps and the child policy allocates 50% bandwidth to voice and 50% to data. If voice traffic exceeds 50 Mbps, what happens to the excess?

Question 65easymultiple choice

Which protocol is used by NSO to communicate with network devices for configuration management?

Question 66mediummultiple choice

Read the full Automation and Quality of Services explanation →

An SP engineer is using YANG to model a service. Which statement correctly describes the use of a 'leafref' type?

Question 67mediummultiple choice

In the context of SR-PCE, which protocol does the PCE use to communicate with the path computation client (PCC) to set up SR-TE policies?

Question 68easymultiple choice

Which DSCP value corresponds to Best Effort (DF) per-hop behavior?

Question 69hardmultiple choice

An SP uses NSO with a YANG service model to provision L3VPNs. Which database in NSO stores the configuration and state for all managed devices?

Question 70mediummultiple choice

Read the full Automation and Quality of Services explanation →

What is the primary difference between traffic shaping and policing in a QoS implementation?

Question 71hardmultiple choice

In a CBWFQ policy with LLQ, which statement is true regarding the bandwidth command for non-priority classes?

Question 72easymultiple choice

Read the full Automation and Quality of Services explanation →

Which component in MQC is used to classify traffic based on match criteria?

Question 73mediummulti select

Read the full Automation and Quality of Services explanation →

An SP is implementing DiffServ at the edge router. Which TWO DSCP values are used for AF41 and AF31, respectively? (Choose two.)

Question 74hardmulti select

Which THREE statements are true regarding NSO's NED? (Choose three.)

Question 75mediummulti select

Which TWO methods can RESTCONF use to create a new data resource? (Choose two.)

Question 76mediummultiple choice

An SP is designing a QoS policy for a customer VPN that carries voice, video conferencing, and bulk data. The voice traffic requires low latency, video conferencing requires assured bandwidth, and bulk data should use any remaining bandwidth. Which queuing strategy should be applied on the PE-CE link?

Question 77hardmultiple choice

An SP engineer is configuring hierarchical QoS on a PE router for a subscriber with a 10 Mbps shaped rate. The child policy must guarantee 2 Mbps for voice, 4 Mbps for video, and the rest for data. However, the parent policy shape rate is 10 Mbps. Which configuration ensures proper operation?

Question 78easymultiple choice

Which DSCP value is recommended for Expedited Forwarding (EF) per-hop behavior, commonly used for voice traffic?

Question 79mediummultiple choice

An SP uses NSO to orchestrate MPLS L3VPN services. The service model is written in YANG, and the NED communicates with the PE routers. Which protocol does NSO use to push configuration to the network devices?

Question 80hardmultiple choice

An SP is deploying SR-TE policies using a central controller. The controller needs to compute paths based on bandwidth and latency constraints. Which protocol is used between the controller and the routers to signal the SR-TE policies?

Question 81mediummultiple choice

An SP network engineer is reviewing a QoS configuration on a PE router. The policy-map uses a class for voice with the 'priority' command, and a class for video with 'bandwidth remaining percent 30'. What is the purpose of the 'bandwidth remaining percent' command?

Question 82easymultiple choice

In the DiffServ model, which field is used in the IP header to mark packets for QoS treatment?

Question 83mediummulti select

Read the full Automation and Quality of Services explanation →

An SP engineer is designing a QoS policy for a business customer with three traffic classes: Voice (critical latency), Transactional Data (low delay), and Bulk Data (no strict requirements). The link is 100 Mbps. Which TWO actions should be part of the policy? (Select two.)

Question 84hardmulti select

An SP is deploying a Network Services Orchestrator (NSO) for service automation. Which THREE components are integral to NSO architecture? (Select three.)

Question 85mediummulti select

An SP is implementing traffic shaping on an MPLS PE-CE link. Which TWO statements are true about shaping compared to policing? (Select two.)

Question 86easymulti select

Which THREE DSCP values are part of the Assured Forwarding (AF) class 4? (Select three.)

Question 87mediummulti select

Read the full Automation and Quality of Services explanation →

An SP is using MQC to configure QoS on a core router. Which TWO statements about MQC are correct? (Select two.)

Question 88hardmulti select

An SP is deploying SR-PCE for centralized traffic engineering. Which THREE functions does the PCE perform? (Select three.)

Question 89mediummulti select