AZ-500 Timed Practice Test 2 — 10 Questions

Question 1

A company has a subscription with Azure Active Directory (Azure AD). They want to enable a conditional access policy that requires all users to use multi-factor authentication (MFA) when accessing the Azure portal. The policy should only apply to users who are members of a group called 'AllUsers'. Which assignment should they configure in the policy?

Accepted Answer

Assign the 'AllUsers' group to the 'Users' section and select 'Azure portal' as the cloud app. Option B is correct because in an Azure AD Conditional Access policy, the 'Users' section is where you specify which users or groups the policy applies to, and the 'Cloud apps' section is where you select the target application (Azure portal). By assigning the 'AllUsers' group to 'Users' and selecting 'Azure portal' as the cloud app, the policy enforces MFA for all members of that group when they access the Azure portal.

Answer

Assign the 'AllUsers' group to the 'Cloud apps' section and select 'Azure portal' as the application

Answer

Add a condition for 'Client apps' specifying 'Browser' only

Answer

Create two policies: one for users and one for the Azure portal

Question 2

A company has several Azure virtual machines (VMs) in a VNet that host a legacy application. IT support staff need to perform remote administration using RDP. The security team wants to avoid exposing the VMs to the public internet and also enforce Azure Multi-Factor Authentication (MFA) for all RDP sessions. Which Azure service should they deploy to meet these requirements?

Accepted Answer

Azure Bastion. Azure Bastion provides secure, seamless RDP/SSH connectivity to Azure VMs directly from the Azure portal over TLS, without exposing the VMs to a public IP address. It also integrates with Azure AD and Conditional Access to enforce Azure Multi-Factor Authentication (MFA) for all RDP sessions, meeting both the security and compliance requirements.

Answer

Just-in-Time (JIT) VM Access from Microsoft Defender for Cloud

Answer

Network Security Groups (NSGs) with allow rules for RDP only from a trusted IP

Answer

Azure Firewall with DNAT rules to forward RDP traffic

Question 3

A company has Azure virtual machines that need to download updates from specific external websites (e.g., *.microsoft.com and *.windowsupdate.com). The security team wants to centrally manage and allow outbound HTTPS traffic only to these FQDNs, while blocking all other outbound internet access. Which Azure networking service should they deploy to achieve this?

Accepted Answer

Azure Firewall. Azure Firewall is a managed, cloud-native network security service that can centrally enforce outbound FQDN-based rules. It allows you to create application rules that permit HTTPS traffic to specific FQDNs (e.g., *.microsoft.com) while blocking all other outbound internet access, meeting the security team's requirement for granular, centralized control.

Answer

Azure Application Gateway

Answer

Azure Front Door

Answer

Azure VPN Gateway

Question 4

A company has two Azure virtual networks: VNet-A and VNet-B. They peer the VNets and deploy a network virtual appliance (NVA) in VNet-A. They want to inspect all outbound traffic from VNet-B to the internet using the NVA. They configure a user-defined route (UDR) in a route table associated with the subnet in VNet-B, with a default route (0.0.0.0/0) and next hop set to the private IP of the NVA in VNet-A. However, outbound traffic from VNet-B still goes directly to the internet. What is the most likely cause?

Accepted Answer

The NVA's network interface must have 'IP forwarding' enabled.. The most likely cause is that IP forwarding is disabled on the NVA's network interface. Even with a correct user-defined route (UDR) pointing 0.0.0.0/0 traffic to the NVA's private IP, Azure will drop packets destined to the NVA unless the NIC is configured to accept and forward traffic not addressed to itself. Enabling IP forwarding allows the NVA to act as a router, processing and forwarding packets between VNets.

Answer

The VNet peering is not configured to allow traffic from VNet-B to route through VNet-A.

Answer

The route table is not associated with the subnet in VNet-B.

Answer

The NVA does not have a public IP address.

Question 5

A company uses Azure AD Identity Protection. They want to automatically block sign-ins that have a high user risk level, but only for users in the 'Finance' department. They also want to require MFA for medium user risk level for all users (including Finance) when sign-in risk is not blocked. They have already created a Conditional Access policy for the Finance department that has a condition of 'User risk level: High' and a grant control of 'Block access'. What additional configuration is needed to also require MFA for all users with medium user risk?

Accepted Answer

Create a second Conditional Access policy targeting all users with condition 'User risk level: Medium' and grant control 'Require multi-factor authentication'. Option A is correct because Azure AD Conditional Access policies are evaluated independently, and a separate policy is needed to require MFA for medium user risk across all users. The existing policy blocks high-risk sign-ins for Finance only, but does not address medium risk for any user. Creating a second policy targeting all users with 'User risk level: Medium' and grant control 'Require multi-factor authentication' satisfies the requirement without conflicting with the existing block policy, as Conditional Access policies are combined (unless explicitly excluded).

Answer

Modify the existing policy to include 'User risk level: Medium' and change the grant control to 'Require multi-factor authentication'

Answer

Use Identity Protection's 'User risk policy' instead of Conditional Access

Answer

Create a new Conditional Access policy with condition 'User risk level: Medium' and grant control 'Block access'

Question 6

A company has an Azure virtual network with a subnet that hosts a public web application. They want to allow inbound HTTPS traffic (port 443) only from the source IP range 203.0.113.0/24, and block all other inbound traffic. They associate a network security group (NSG) with the subnet. What is the minimum number of inbound security rules required in the NSG to achieve this?

Accepted Answer

1. Option B is correct because NSGs include default inbound rules that already block all inbound traffic not explicitly allowed. By adding a single inbound rule to allow HTTPS (port 443) from the source IP range 203.0.113.0/24, all other inbound traffic is implicitly denied by the default deny-all rule (rule 65000). No explicit deny rule is needed, and no additional rules for Azure Load Balancer health probes are required unless the application is behind a load balancer, which is not specified in the scenario.

Answer

0 (no additional rules needed because the default rules block all inbound traffic)

Answer

2 (one allow rule for HTTPS and one deny rule for all other traffic)

Answer

3 (one allow HTTPS, one allow for Azure Load Balancer health probes, and one deny all)

Question 7

A company uses Azure AD Privileged Identity Management (PIM) to manage the Global Administrator role. They want to require that when a user activates the role, they must be using a device that is compliant with Intune policies (e.g., compliant device) and must provide a justification. The company already has Conditional Access policies in place for regular access. How should they enforce the device compliance requirement specifically during PIM activation?

Accepted Answer

In PIM settings for the Global Administrator role, enable 'Require Azure AD Conditional Access authentication context' and create a Conditional Access policy that requires compliant device when that authentication context is used.. Option C is correct because Azure AD PIM can integrate with Conditional Access via authentication context. By enabling 'Require Azure AD Conditional Access authentication context' in the PIM role settings and then creating a Conditional Access policy that targets that authentication context with the 'Require compliant device' grant control, you enforce device compliance specifically during role activation. This approach ensures the device compliance check is applied only when the user activates the Global Administrator role, not during regular access.

Answer

Configure a Conditional Access policy that targets the 'Azure AD Privileged Identity Management' cloud app, requiring compliant device.

Answer

In PIM settings for the Global Administrator role, enable 'Require Multi-Factor Authentication on activation'.

Answer

Use Azure AD Identity Protection's user risk policy to require device compliance when a high-risk user activates the role.

Question 8

A company uses Microsoft Defender for Cloud. They have assigned a custom regulatory compliance initiative that includes policies to enforce encryption on storage accounts and SQL databases. They want to automatically remediate any non-compliant resources that are discovered, without manual intervention. Which feature should they configure?

Accepted Answer

Enable 'Remediation' for each policy assignment in the custom initiative. Option B is correct because the 'Remediation' setting on a policy assignment in Azure Policy (used by Defender for Cloud custom initiatives) creates a managed identity and a remediation task that automatically applies the required encryption configuration to non-compliant resources. This ensures that when a storage account or SQL database is found without encryption, the policy engine triggers a deployment to enforce encryption without manual intervention.

Answer

Enable 'Auto provisioning' for the relevant extensions

Answer

Enable 'Just-in-time (JIT) VM access'

Answer

Enable 'Workflow automation' to trigger a Logic App when non-compliance is detected

Question 9

A company has Azure AD Identity Protection enabled. The security team wants to automatically block sign-ins that are detected as coming from a known malicious IP address. They have created a Conditional Access policy and assigned it to all users. Which configuration should they add to the policy to trigger the block based on Identity Protection risk?

Accepted Answer

Add a condition for 'Sign-in risk' set to 'High' and a grant control of 'Block access'.. Option A is correct because Identity Protection detects sign-ins from known malicious IP addresses and assigns a 'Sign-in risk' level (e.g., High). By adding a condition for 'Sign-in risk' set to 'High' and a grant control of 'Block access', the Conditional Access policy will automatically block those sign-ins. This directly uses Identity Protection's risk detection to enforce the block without needing to manually maintain IP address lists.

Answer

Add a condition for 'Locations' and specify the known malicious IP ranges as 'Blocked locations'.

Answer

Add a condition for 'User risk' set to 'High' and a grant control of 'Require multi-factor authentication'.

Answer

Add a condition for 'Device state' set to 'Not compliant' and a grant control of 'Block access'.

Question 10

A company uses Azure AD B2B collaboration to invite external partner users. The security policy requires that guest users who have not signed in for more than 90 days should have their access automatically reviewed and, if not approved, removed. The company has Azure AD Premium P2 licenses. Which Azure AD feature should they configure to meet this requirement?

Accepted Answer

Configure an Azure AD Access Review that reviews guest user access and automatically removes access after 90 days of inactivity.. Option C is correct because Azure AD Access Reviews, available with Azure AD Premium P2 licenses, allow you to create recurring reviews that specifically target guest users who have not signed in for a specified period (e.g., 90 days). The review can be configured to automatically remove access if the reviewer does not approve, directly meeting the requirement for automatic review and removal after 90 days of inactivity.

Answer

Enable automatic user deletion in the Azure AD B2B collaboration settings.

Answer

Create a Conditional Access policy that blocks sign-ins for guest users who haven't authenticated in 90 days.

Answer

Use Azure AD Identity Protection to detect guest user sign-in anomalies and revoke sessions.