Secure networking

Your company has an Azure subscription with a hub-spoke network topology. The hub contains an Azure Firewall and a VPN gateway for on-premises connectivity. The spoke virtual network hosts a critical application. You need to ensure that all outbound traffic from the spoke to the internet and on-premises networks flows through the Azure Firewall. You configure a user-defined route (UDR) on the spoke subnet with the default route (0.0.0.0/0) pointing to the Azure Firewall private IP. However, traffic to on-premises still bypasses the firewall. What is the most likely cause?

A company has a hub-spoke network topology with Azure Firewall deployed in the hub virtual network. Spoke virtual networks are peered to the hub. The security team needs to ensure that all outbound internet traffic from virtual machines in a spoke subnet goes through the Azure Firewall. They have configured a route table on the spoke subnet with a default route (0.0.0.0/0) pointing to the Azure Firewall private IP address. However, traffic from spoke VMs is still bypassing the firewall and going directly to the internet. What is the most likely reason?

A company has two Azure virtual networks, VNet-A (hub) and VNet-B (spoke), connected via VNet peering. They deploy a network virtual appliance (NVA) in a subnet in VNet-A to inspect all traffic between the VNets. They configure a user-defined route (UDR) on the subnet in VNet-B with the destination address space of VNet-A (10.0.0.0/16) and the next hop set to the private IP of the NVA. However, traffic from VNet-B to VNet-A still bypasses the NVA and takes a direct path. What is the most likely cause?

A company has two Azure virtual networks, VNet-A and VNet-B, connected via VNet peering. They want all traffic between the VNets to be inspected by a network virtual appliance (NVA) deployed in a subnet in VNet-A. They have configured a user-defined route (UDR) on the subnet in VNet-B that points the destination address space of VNet-A to the private IP of the NVA. However, traffic between the VNets is still not passing through the NVA. What is the most likely cause?

A company has two Azure virtual networks (VNet-A and VNet-B) connected via VNet peering. They need to ensure that all traffic between the two VNets is encrypted using IPsec and that no traffic can bypass the encryption. The security team has enabled the 'Use remote virtual network gateways' setting on the peering. However, traffic is still flowing unencrypted. What additional configuration is required to enforce encryption for all traffic between the VNets?

A company is designing a hub-spoke network topology with Azure Firewall in the hub virtual network. Spoke virtual networks are peered to the hub. They want to ensure that all outbound internet traffic from virtual machines in a spoke subnet goes through the Azure Firewall. They have configured a route table on the spoke subnet with a default route (0.0.0.0/0) pointing to the Azure Firewall's private IP address as the next hop. However, traffic is still bypassing the firewall. What is the most likely cause?

A company has an Azure SQL Database with a private endpoint connection. The database is accessed from on-premises via ExpressRoute and from other Azure virtual networks (VNets) via VNet peering. The security team wants to ensure that all queries from both on-premises and peered VNets go through the private endpoint and NEVER use the public endpoint, even as a fallback. Which additional configuration is required to enforce this?

A company runs a global web application on Azure App Service instances deployed in multiple Azure regions. They want to protect the application from common web attacks such as SQL injection and cross-site scripting (XSS) using a centralized set of managed rules that can be automatically updated. They also need to improve performance by terminating traffic at the nearest point of presence (POP) to end users. Which Azure service should they deploy in front of the App Service?

A company has an Azure virtual network with two subnets: App and Data. The App subnet hosts web servers, and the Data subnet hosts SQL databases. Security policy requires that only HTTPS traffic from the App subnet is allowed to the Data subnet, and all other inbound traffic to the Data subnet must be blocked. The solution must use a single network security group (NSG) associated to the Data subnet. Which NSG inbound rule configuration meets the requirement?

A company deploys Azure Firewall in a hub VNet to inspect all outbound traffic from a spoke VNet. They enable VNet peering between the hub and spoke. They create a route table with a default route (0.0.0.0/0) pointing to the firewall's private IP as the next hop, and associate it with the spoke subnets. However, outbound traffic from the spoke subnets is still going directly to the internet, bypassing the firewall. What is the most likely cause?

A company has an Azure virtual network with a subnet hosting internal web applications. The security team needs to allow inbound HTTPS traffic only from the company's corporate network IP range (203.0.113.0/24). All other inbound traffic must be denied. They want to use a network security group (NSG) associated with the subnet. Which inbound security rule configuration meets this requirement?

A company deploys multiple Azure virtual machines across several subnets in a virtual network. The VMs are grouped by application tiers: web, application, and database. The security team wants to apply network security group (NSG) rules that target all VMs in a specific tier, and they need a way to easily add or remove VMs from these groups without updating NSG rules. Which Azure feature should they use to define these logical VM groups?

A company has an Azure virtual network with a subnet that contains virtual machines. They have deployed Azure Firewall in a hub VNet and peered the spoke VNet to the hub. They have configured a route table on the spoke subnet with a default route (0.0.0.0/0) pointing to the Azure Firewall's private IP as the next hop. However, traffic from the VMs is still going directly to the internet. What is the most likely cause?

A company has a hub-spoke network topology in Azure. The spoke virtual networks contain Azure virtual machines that need to access the internet. The security team requires that all outbound internet traffic from the spoke VMs passes through the Azure Firewall deployed in the hub virtual network for inspection and logging. Which configuration should be implemented to ensure this traffic is routed through the firewall?

A company has an Azure virtual network with a subnet hosting web servers. The security policy requires that all inbound HTTP traffic must be sourced from a specific IP address range (203.0.113.0/24). All other inbound traffic must be denied. The subnet is associated with a network security group (NSG). Which set of inbound rules should they configure?

A company uses Azure Firewall to filter outbound traffic. They want to ensure that all DNS queries from virtual machines in a spoke VNet are routed through the Azure Firewall for logging and inspection. They have already configured the firewall to use a custom DNS server. Which additional Azure Firewall feature must be enabled to ensure that the VMs use the firewall as a DNS proxy?

A company has several Azure virtual machines (VMs) in a VNet that host a legacy application. IT support staff need to perform remote administration using RDP. The security team wants to avoid exposing the VMs to the public internet and also enforce Azure Multi-Factor Authentication (MFA) for all RDP sessions. Which Azure service should they deploy to meet these requirements?

A company has multiple on-premises web applications that need to be securely published for remote employees. The company uses Azure AD for identity management and wants to apply Conditional Access policies, including multi-factor authentication, to these applications. The security team wants to avoid exposing the on-premises infrastructure to the internet directly. Which Azure service should they deploy to meet these requirements?

A company runs a public-facing web application on Azure App Service in the West US region. They want to protect against network-layer (Layer 3/4) DDoS attacks. The application consists of a single App Service instance. Which Azure DDoS Protection tier should they enable to meet this requirement while minimizing cost?

A company uses Azure Front Door to accelerate and secure its public web application. The security team wants to limit the number of requests from a single client IP address to 100 per minute to prevent a single user from overwhelming the backend. Which configuration should they add to the Web Application Firewall (WAF) policy associated with the Front Door?

A company has Azure virtual machines that need to download updates from specific external websites (e.g., *.microsoft.com and *.windowsupdate.com). The security team wants to centrally manage and allow outbound HTTPS traffic only to these FQDNs, while blocking all other outbound internet access. Which Azure networking service should they deploy to achieve this?

You have an Azure virtual machine that hosts a web application on port 443 and a management interface on port 8443. You need to allow inbound HTTPS traffic from the internet to port 443, and allow inbound traffic on port 8443 only from the company's office public IP range (203.0.113.0/24). You want to use a managed service that provides basic DDoS protection at no additional cost. What should you use?

A company deploys Azure virtual machines in a virtual network. A security policy requires that only Remote Desktop Protocol (RDP) traffic from the corporate VPN's public IP address (203.0.113.0/26) is allowed. All other inbound RDP traffic must be denied. Which configuration should be applied to the network security group (NSG) associated with the VM subnet?

A security administrator is troubleshooting network connectivity to an Azure virtual machine. The VM is behind a network security group (NSG) that has a deny-all inbound rule as the default. The administrator wants to quickly verify whether a specific TCP packet on port 3389 from their client IP (203.0.113.50) would be allowed or blocked by the NSG. Which Azure Network Watcher tool should they use?

A company has two Azure virtual networks in different Azure regions that need to communicate with each other. The security policy mandates that all inter-region traffic must be encrypted over the public internet. Which connectivity solution should the company implement to meet this requirement?

A company has an Azure virtual network with two subnets: Frontend and Backend. They deploy a network virtual appliance (NVA) in a subnet named NVA_Subnet. They want to route all traffic from the Frontend subnet to the Backend subnet through the NVA for inspection. What is the minimum number of route tables required to achieve this traffic steering?

A company has an Azure virtual network with a subnet that hosts a web application. The security team wants to allow inbound HTTPS traffic (port 443) from the internet to the web servers, but block all other inbound traffic. They have a network security group (NSG) associated with the subnet. What is the minimal set of inbound rules required?

A company has an Azure virtual network with a single subnet that hosts web servers. The security team needs to allow inbound HTTPS traffic from the internet to the web servers, but block all other inbound traffic. They want to use a single Azure resource to accomplish this at the subnet level. Which resource should they configure?

Your company uses Azure Firewall to protect a virtual network. The security team needs to allow outbound HTTPS traffic from a specific subnet to a set of FQDNs, such as '*.contoso.com', while blocking all other outbound traffic. Which type of Azure Firewall rule should they configure?

A company has a virtual network with a subnet hosting Azure VMs. They want to restrict all inbound traffic to only allow HTTPS (port 443) from the internet, but also allow SSH (port 22) only from a specific management IP address range (e.g., 203.0.113.0/24). Which Azure service should they use to achieve this filtering?

You have an Azure virtual machine that hosts a web application. You need to allow inbound HTTP (80) and HTTPS (443) traffic from the internet to this VM only. You also need to allow outbound traffic to the internet from the VM. You want to use a managed Azure service with minimal configuration. What should you use?

A company has a virtual network in Azure with a subnet that hosts a web application. They want to allow inbound HTTPS traffic only from a specific source IP range (198.51.100.0/24). They are using Network Security Groups (NSGs) associated with the subnet. What is the minimal set of inbound security rules required?

A company has an Azure virtual network with multiple subnets. They want to centrally inspect and log all outbound traffic to the internet. They also need to allow or deny traffic based on domain names (FQDNs). Which Azure resource should they deploy?

A company has an Azure virtual network with subnets SubnetA and SubnetB. They deploy a network virtual appliance (NVA) in a subnet called NVA_Subnet. They want all traffic between SubnetA and SubnetB to be routed through the NVA for inspection. What is the minimum number of route tables and routes required?

A company runs a public-facing web application on Azure App Service in the West US region. They want to protect against network-layer (Layer 3/4) DDoS attacks and have a single web application. Which Azure DDoS Protection tier should they use?

A company deploys a web application on Azure VMs behind an Azure Load Balancer (Standard SKU). They want to protect the application from common web attacks like SQL injection and cross-site scripting. Which Azure service should they enable?

You are securing an Azure Kubernetes Service (AKS) cluster. You need to restrict network traffic between pods and to external services using Azure network policies. Which three of the following options are valid considerations or steps? (Choose three.)

Drag and drop the steps to create an Azure Key Vault firewall rule to allow access from a specific virtual network into the correct order.

Drag and drop the steps to configure Azure AD Conditional Access policy to require MFA for all users into the correct order.

Your organization has multiple Azure subscriptions connected via a hub-spoke topology using Azure Firewall in the hub. You need to ensure that traffic between spoke VNets is routed through the firewall for inspection. You configure user-defined routes (UDRs) on the spoke subnets. However, traffic between spokes is still bypassing the firewall. What is the most likely reason?

Your organization has deployed Azure Front Door Premium with Web Application Firewall (WAF) policy in front of an Azure App Service. You need to ensure that only traffic from Azure Front Door is allowed to reach the App Service, and all other traffic is blocked. Which configuration should you implement?

A company has deployed Azure Firewall in a hub virtual network with forced tunneling enabled. Spoke virtual networks are peered to the hub. The security team reports that outbound traffic from the spoke VMs is bypassing the firewall. What is the most likely reason?

Which TWO Azure services can be used to distribute incoming traffic across multiple virtual machines in a backend pool while providing layer 7 load balancing? (Choose two.)

Refer to the exhibit. A security administrator runs the Azure CLI commands to create a VM with a single NIC and applies an NSG rule to deny outbound TCP traffic to the Internet on ports 80 and 443. However, the VM can still access websites on the Internet. What is the most likely reason?

You need to block outbound internet access from all VMs in a VNet except for specific allowed destinations (e.g., Microsoft updates). You cannot use a third-party NVA. Which Azure service should you use to meet this requirement?

You have an Azure Web Application Firewall (WAF) policy associated with an Azure Front Door instance. You want to block requests from a specific country (e.g., Country X) unless the request includes a valid API key. How should you configure this?

You configure Azure Bastion to allow secure RDP access to VMs in a VNet. However, users report that they cannot connect to a specific VM, while other VMs in the same VNet are accessible. The VM is running and has a public IP. What is the most likely cause?

You are designing network security for a multi-tier application deployed in Azure. The application consists of a front-end web tier, a middle-tier API, and a back-end database. All tiers must be isolated from the internet except the front-end, which must accept HTTPS traffic from the internet. You need to ensure that no traffic can bypass the network security controls. What should you implement?

You are configuring Azure Private Link for a SQL Database. You want to ensure that all traffic from your virtual network to the SQL Database stays within the Microsoft Azure backbone network. What is the primary benefit of using Azure Private Link over a service endpoint?

You are designing a network security strategy for an Azure Kubernetes Service (AKS) cluster. You need to restrict egress traffic from the cluster to only allow connections to specific Azure services (e.g., Microsoft Container Registry, Azure Key Vault). The solution must minimize administrative overhead. What should you use?

Refer to the exhibit. You have an Azure Firewall policy with the shown rules. Traffic from 10.0.0.0/8 to www.google.com on HTTPS (443) is being blocked. What is the most likely reason?

Which TWO Azure services can be used to filter inbound internet traffic to a virtual network? (Choose two.)

You need to securely connect an on-premises network to Azure over the internet with encrypted traffic. The connection must be site-to-site and use IPsec. Which Azure service should you use?

You are designing a network security solution for a multi-tier application. The web tier must be accessible from the internet, but the application and database tiers must be isolated. Which TWO configurations should you implement?

You need to monitor and log network traffic between Azure VMs for security analysis. Which THREE components should you enable?

Your company uses Azure Front Door to globally distribute traffic to a web app. You need to ensure that only traffic from Front Door can reach the web app, and all other traffic is blocked. The web app is behind an Azure Application Gateway. What is the most secure and reliable configuration?

A company has a hub-spoke network topology in Azure. The hub virtual network contains an Azure Firewall. Spoke virtual networks are peered to the hub. The security team wants to inspect all traffic between virtual machines in different spoke virtual networks. What is the minimum configuration required?

You are the security engineer for a financial services company that has multiple Azure subscriptions. The company uses Azure Virtual WAN with a secured hub containing Azure Firewall. Recently, the compliance team identified that traffic between two spoke virtual networks (SpokeA and SpokeB) is bypassing the firewall. Investigation shows that SpokeA and SpokeB are directly peered and have not been routed through the hub. The requirement is that all inter-spoke traffic must be inspected by Azure Firewall. You need to enforce this without disrupting existing applications. Also, the company uses Azure Firewall Manager for policy management and wants to use Azure Policy to prevent future direct peering. What should you do first?

A small business has a single Azure subscription with one virtual network containing two subnets: 'Frontend' for web servers and 'Backend' for database servers. The web servers need to access the internet to download updates, but the database servers must not have any outbound internet access. The business also needs to allow remote administration of the web servers from the internet via RDP (port 3389) but only from the IT department's public IP range (203.0.113.0/24). You need to configure network security to meet these requirements using Azure-native services. What should you do?

You are deploying a web application in Azure that must be accessible only from your corporate network via HTTPS. You have an Azure Application Gateway with a Web Application Firewall (WAF) policy. Your corporate network uses public IP addresses from a specific range. Which configuration should you use to restrict access?

You manage a multi-tier application in Azure with a web tier, application tier, and database tier. The web tier must be accessible from the internet, but the application and database tiers must only be accessible from the web tier. Which Azure networking feature should you use to isolate the tiers?