MLS-C01 Practice Test 1 — 25 Questions

Question 1

A company needs to transfer 10 TB of data from an on-premises data center to Amazon S3. The network bandwidth is limited to 100 Mbps, and the transfer must complete within 5 days. Which TWO options are viable? (Choose TWO.)

Accepted Answer

Use AWS Snowball Edge device to ship the data. Option C is correct because AWS Snowball Edge is a physical data transport solution designed for large-scale data transfers over slow or unreliable networks. With 10 TB of data and a 100 Mbps link, the theoretical transfer time is over 9 days, exceeding the 5-day window. Snowball Edge bypasses the network bottleneck entirely by shipping the data via courier. Option E is also correct because AWS Direct Connect provides a dedicated network connection that can offer higher and more consistent bandwidth than the existing internet connection. If provisioned with sufficient capacity (e.g., 1 Gbps), the transfer can complete within the 5-day window. Options A and B are not viable because they cannot overcome the physical bandwidth limitation of 100 Mbps. Option D is not viable because DataSync still relies on the existing internet connection, which is insufficient.

Answer

Use S3 Transfer Acceleration to speed up the transfer

Answer

Use S3 Multipart Upload to upload files in parallel

Answer

Use AWS DataSync over the existing internet connection

Question 2

A company is using Amazon Kinesis Data Streams to ingest real-time clickstream data. The data is consumed by a Lambda function that writes to an S3 bucket. Recently, the Lambda function started failing with 'ProvisionedThroughputExceededException' errors. What is the MOST likely cause?

Accepted Answer

The Kinesis stream has too few shards for the data volume.. The 'ProvisionedThroughputExceededException' error in Amazon Kinesis Data Streams indicates that the data ingestion rate exceeds the write capacity of the stream's shards. Each shard supports up to 1 MB/s or 1,000 records/s for writes. If the clickstream data volume surpasses this limit, the Lambda function, which reads from the stream, will encounter this exception. Increasing the number of shards scales the write capacity to match the data volume.

Answer

The data retention period of the stream is too short.

Answer

The S3 bucket has insufficient write capacity.

Answer

The Lambda function's reserved concurrency is set too high.

Question 3

A team is building a data pipeline to process terabytes of log data daily using Amazon EMR. The data arrives in 5-minute windows and must be available for querying within 30 minutes. The data is originally in gzip-compressed CSV files. Which approach will minimize processing time and cost?

Accepted Answer

Use Amazon EMR with Spark to convert data to Parquet and store in S3, using spot instances for task nodes.. Option B is correct because converting gzip-compressed CSV to Parquet reduces storage size and improves query performance due to columnar storage and predicate pushdown. Using spot instances for task nodes significantly lowers compute cost, while the 30-minute SLA is achievable with Spark on EMR processing 5-minute windows of data.

Answer

Use Amazon EMR with Spark to convert data to Parquet and use on-demand instances.

Answer

Use AWS Glue to convert data to gzip-compressed CSV and query with Athena.

Answer

Use Amazon EMR with Hive to transform data to compressed CSV and store in S3.

Question 4

A data science team is building a real-time fraud detection system. Transactions are streamed via Amazon Kinesis Data Streams, and a Lambda function performs feature engineering and invokes an Amazon SageMaker endpoint for predictions. The team notices that the Lambda function is timing out and causing data loss. Which solution should the team implement to process the stream reliably and at low latency?

Accepted Answer

Use Amazon Kinesis Data Analytics for Apache Flink to consume the stream, perform feature engineering, and invoke the SageMaker endpoint with exactly-once processing.. Option A is correct because Amazon Kinesis Data Analytics for Apache Flink provides a stateful, low-latency stream processing engine that can consume from Kinesis Data Streams, perform feature engineering in real-time, and invoke SageMaker endpoints with exactly-once processing semantics. This eliminates Lambda timeouts and data loss by using a long-running, scalable application instead of a short-lived function.

Answer

Use the Kinesis Client Library (KCL) to process the stream in an Amazon EC2 instance, and store the predictions in Amazon DynamoDB.

Answer

Increase the Lambda function timeout to 15 minutes and allocate more memory to reduce processing time.

Answer

Configure Amazon Kinesis Firehose to deliver the stream to an Amazon S3 bucket, then trigger a Lambda function to process the data in batches.

Question 5

A company uses Amazon SageMaker to train and deploy machine learning models. The training data is stored in Amazon S3 (Parquet format, 10 TB). The data scientists have been running training jobs using the File mode input, but the jobs are taking too long due to data download time. They want to reduce the training start-up time and overall training time. Which solution is MOST cost-effective and efficient?

Accepted Answer

Configure the SageMaker training job to use Pipe mode, which streams data directly from S3 without downloading to the instance's local storage.. Pipe mode in SageMaker streams training data directly from Amazon S3 to the training algorithm without first downloading it to the instance's local storage. This eliminates the data download step, significantly reducing startup time and overall training time for large datasets like 10 TB. It is the most cost-effective because it avoids the need for larger instances or additional data transfer acceleration services.

Answer

Use S3 Transfer Acceleration to speed up the data transfer from S3 to the training instance.

Answer

Use larger EC2 instances with more vCPUs and memory to speed up the training process.

Answer

Enable Elastic Fabric Adapter (EFA) on the training instances to improve network throughput.

Question 6

A data engineering team is designing a data lake on AWS for machine learning workloads. The data includes structured, semi-structured, and unstructured data. The team needs to ensure that the data is cataloged, easily discoverable, and can be queried by Amazon Athena and Amazon EMR. The team also wants to enforce fine-grained access control at the column and row level for sensitive data. Which combination of AWS services should the team use? (Select TWO.)

Accepted Answer

AWS Lake Formation. AWS Lake Formation is correct because it provides a centralized service to build, secure, and manage data lakes on AWS. It enables fine-grained access control at the column and row level for sensitive data, which directly meets the requirement for enforcing such controls. Additionally, Lake Formation integrates with Amazon Athena and Amazon EMR for querying and processing the cataloged data.

Answer

AWS Identity and Access Management (IAM)

Answer

Amazon RDS for PostgreSQL

Answer

Amazon DynamoDB

Question 7

A data scientist needs to transform raw JSON data from an S3 bucket into Parquet format using AWS Glue. The job must be cost-effective and run only when new data arrives. Which solution should be used?

Accepted Answer

Create a Glue ETL job triggered by an S3 event notification via Lambda.. Option D is correct because it uses an S3 event notification to invoke a Lambda function, which then triggers an AWS Glue ETL job only when new data arrives. This event-driven architecture ensures cost-effectiveness by avoiding continuous or scheduled runs, and it directly transforms raw JSON into Parquet format as required.

Answer

Create a Glue crawler that runs continuously.

Answer

Schedule a Glue ETL job to run every hour.

Answer

Use Glue DataBrew to transform data and schedule it daily.

Question 8

A company needs to build a data lake on AWS for analytics. The data includes structured, semi-structured, and unstructured data. The solution must support schema-on-read, provide fine-grained access control, and be cost-effective for storing rarely accessed data. Which THREE services should be used? (Choose THREE)

Accepted Answer

AWS Glue Data Catalog for schema-on-read.. AWS Glue Data Catalog is correct because it provides a centralized metadata repository that enables schema-on-read for data stored in Amazon S3. It allows you to define table schemas and partitions without transforming the underlying data, so analytics tools like Amazon Athena and Amazon EMR can query the data with the schema applied at read time.

Answer

Amazon Redshift for data warehousing.

Answer

Amazon EMR for data processing.

Question 9

A data engineer created an IAM policy to allow a Glue ETL job to read and write objects to an S3 bucket. The ETL job fails when writing data with the error 'Access Denied'. The job is configured to use SSE-S3 (AES256) encryption. What is the likely issue?

Accepted Answer

The policy does not grant s3:PutObject on the bucket itself, which is needed for some write operations.. The error 'Access Denied' when writing to S3 with SSE-S3 encryption typically occurs because the IAM policy lacks the `s3:PutObject` permission on the bucket resource itself. While the policy may grant `s3:PutObject` on the object ARN (`arn:aws:s3:::bucket/*`), some S3 write operations—especially those involving encryption headers or bucket-level checks—also require the permission on the bucket ARN (`arn:aws:s3:::bucket`). Without this, the request is denied even if the object-level permission exists.

Answer

The policy grants s3:PutObject on all buckets, not just the specific one.

Answer

The condition requires objects to be encrypted with SSE-KMS, but the job uses SSE-S3.

Answer

The condition requires objects to use SSE-S3, but the job uses SSE-KMS.

Question 10

A company runs a real-time fraud detection system using Amazon Kinesis Data Streams with 100 shards. Data is consumed by a custom Java application running on Amazon EC2 instances in an Auto Scaling group. The application processes records and writes results to a DynamoDB table. Over the past month, the application has experienced intermittent slowdowns and the DynamoDB write capacity has been fully utilized during peak hours. The team wants to improve throughput without losing the ability to reprocess failed records. The application currently uses the Kinesis Client Library (KCL) with DynamoDB as the lease table. The team is considering the following changes: A. Increase the number of EC2 instances to match the number of shards. B. Switch to using AWS Lambda as the consumer to handle scaling automatically. C. Increase the write capacity of the DynamoDB lease table to handle more workers. D. Use enhanced fan-out to have each consumer receive its own 2 MB/second shard throughput. Which change should the team implement first to address the issue?

Accepted Answer

Use enhanced fan-out to have each consumer receive its own 2 MB/second shard throughput.. The primary bottleneck is DynamoDB write capacity being fully utilized during peak hours. Enhanced fan-out (option B) provides each consumer with a dedicated 2 MB/second read throughput per shard, eliminating the need for consumers to contend for the shared 2 MB/second per shard. This reduces the load on the DynamoDB lease table because workers no longer need to poll for records, which in turn lowers the write operations to the lease table and alleviates the DynamoDB write capacity issue.

Answer

Increase the write capacity of the DynamoDB lease table to handle more workers.

Answer

Switch to using AWS Lambda as the consumer to handle scaling automatically.

Answer

Increase the number of EC2 instances to match the number of shards.

Question 11

A team wants to move data from an on-premises Oracle database to Amazon S3 for analytics. The pipeline must run daily and handle incremental updates. Which THREE services should they use together? (Choose three.)

Accepted Answer

Amazon S3. Amazon S3 is the correct destination for storing the data because it provides a scalable, durable, and cost-effective object storage solution ideal for analytics workloads. The pipeline requires daily incremental updates, and S3 integrates seamlessly with AWS DMS for continuous replication and AWS Glue for ETL processing, making it the central storage layer for the analytics pipeline.

Answer

Amazon SageMaker

Answer

Amazon Athena

Question 12

A company is building a recommendation system using Amazon SageMaker. The data is stored in a large S3 bucket with millions of small CSV files. The team wants to train a factorization machines model. Which data ingestion strategy will be MOST efficient?

Accepted Answer

Use a SageMaker Processing job with a Spark container to read the files and write a single RecordIO file.. Option A is correct because SageMaker's factorization machines algorithm requires data in RecordIO-wrapped protobuf format for optimal performance, especially with high-dimensional sparse data. Using a SageMaker Processing job with Spark efficiently reads millions of small CSV files from S3, coalesces them into a single or few large RecordIO files, and avoids the overhead of many small S3 GET requests during training, which would otherwise cause severe I/O bottlenecks.

Answer

Use Amazon Athena to query the data and output to a single CSV.

Answer

Point the training job directly to the S3 bucket containing the CSV files.

Answer

Use SageMaker Data Wrangler to create a data flow and export to a training dataset.

Question 13

A data engineer needs to set up a data lake on S3 that supports both batch and streaming ingestion. The data must be queryable by Athena, Redshift Spectrum, and EMR. Which TWO configurations are essential? (Choose two.)

Accepted Answer

Store data in columnar formats like Parquet or ORC.. Option A is correct because columnar formats like Parquet and ORC are optimized for analytical queries, reducing I/O by reading only the necessary columns. This is essential for Athena, Redshift Spectrum, and EMR, which all benefit from the efficient compression and predicate pushdown capabilities of these formats, enabling faster query performance and lower costs.

Answer

Enable S3 Select on the target buckets.

Answer

Enable S3 versioning on all buckets.

Answer

Set up Kinesis Data Firehose for streaming ingestion.

Question 14

A company wants to analyze streaming data from IoT devices in near-real-time. They need to store raw data in Amazon S3 and also run SQL queries on the streaming data. Which TWO services should they use?

Accepted Answer

Amazon Kinesis Data Analytics. Amazon Kinesis Data Analytics is correct because it enables running SQL queries on streaming data in near-real-time, allowing the company to analyze IoT data as it arrives without needing to store it first. It integrates directly with Kinesis Data Streams or Firehose to process data streams using standard SQL, making it ideal for real-time analytics on streaming data.

Answer

AWS Glue

Answer

Amazon Kinesis Data Streams

Answer

AWS Lambda

Question 15

Match each AWS AI service to its capability.

Accepted Answer

Amazon Comprehend: Extract insights and relationships from text. The correct matches are: Amazon Comprehend for extracting insights from text, Amazon Lex for building conversational interfaces, and Amazon Polly for text-to-speech. Distractors swap capabilities between services.

Answer

Amazon Lex: Translate text between languages

Answer

Amazon Polly: Convert speech to text

Question 16

A company wants to build a data lake on Amazon S3. The data lake should support both batch and real-time data ingestion. Which AWS services should be used for data ingestion? (Choose TWO.)

Accepted Answer

AWS Glue. AWS Glue is correct because it provides a managed ETL service that can handle batch data ingestion into a data lake on Amazon S3. It can be scheduled for periodic batch loads or triggered by events, making it suitable for batch ingestion workflows. Amazon Kinesis Data Firehose is correct because it is a fully managed service for loading streaming data into S3 in near real-time, supporting real-time ingestion with automatic buffering and compression.

Answer

Amazon Redshift

Answer

Amazon Athena

Answer

Amazon SQS

Question 17

Which TWO actions are best practices for securing a SageMaker notebook instance? (Select TWO.)

Accepted Answer

Disable direct internet access for the notebook instance.. Disabling direct internet access for a SageMaker notebook instance (Option A) is a best practice because it prevents the instance from reaching the public internet, reducing the attack surface. This forces all outbound traffic through a VPC, allowing you to control egress via NAT gateways or VPC endpoints, and ensures data does not traverse the public internet. It is a fundamental security hardening step for sensitive workloads.

Answer

Enable root access for users to install packages.

Answer

Store data in the notebook's local storage for performance.

Answer

Use a shared IAM user for all data scientists.

Question 18

A data scientist is training a deep learning model using Amazon SageMaker. The training loss is decreasing, but the validation loss starts increasing after 10 epochs. The model is overfitting. Which TWO actions should the data scientist take to reduce overfitting? (Choose 2.)

Accepted Answer

Add dropout layers. Option D is correct because dropout layers randomly deactivate a fraction of neurons during training, which forces the network to learn more robust features and reduces co-adaptation, a common cause of overfitting. This technique is particularly effective in deep learning models trained on SageMaker, where large architectures can quickly memorize training data.

Answer

Increase the number of layers

Answer

Remove L2 regularization

Answer

Increase the number of training steps

Question 19

During EDA, a data scientist notices that a feature has a high proportion of missing values (e.g., 70%). The feature is continuous and expected to be important based on domain knowledge. What is the best approach to handle this?

Accepted Answer

Create a binary indicator for missingness and impute the continuous values with the median.. Option B is correct because it preserves the predictive signal from the feature while accounting for the pattern of missingness. Creating a binary indicator allows the model to learn whether missingness itself is informative, and median imputation is robust to outliers for a continuous feature. This approach avoids the bias of dropping the feature entirely and is more principled than arbitrary out-of-range imputation.

Answer

Remove the feature entirely to avoid bias.

Answer

Impute missing values with -1 since it is out of range.

Answer

Drop all rows with missing values in that feature.

Question 20

During EDA, a data scientist creates a scatter matrix of numerical features and notices that some features have a funnel-shaped pattern (variance increases with the mean). What is the appropriate transformation to stabilize variance?

Accepted Answer

Apply log transformation.. A funnel-shaped pattern in a scatter matrix indicates heteroscedasticity, where variance increases with the mean. The log transformation is appropriate because it compresses the scale of the data, making the variance more constant across the range of values, which stabilizes variance for right-skewed or multiplicative data.

Answer

Standardize the features using Z-scores.

Answer

Apply a sine transformation.

Answer

Apply Box-Cox transformation with lambda=0.