Question 406 of 1,639
Perform threat huntingeasyMultiple ChoiceObjective-mapped

SC-200 Perform threat hunting Practice Question

This SC-200 practice question tests your understanding of perform threat hunting. Match the stated requirement to the specific cloud service, access model, or configuration option — many options are valid in isolation but not for this scenario. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

Exhibit

Refer to the exhibit.
```kusto
// KQL query in Microsoft Sentinel hunting
DeviceNetworkEvents
| where Timestamp > ago(7d)
| where RemotePort == 445
| summarize TotalConnections = count() by DeviceName, RemoteIP
| where TotalConnections > 100
| project DeviceName, RemoteIP, TotalConnections
```

A threat hunter runs this KQL query to find devices making many outbound SMB connections. The result shows a device 'DC01' connecting to over 100 different IPs on port 445. What is the most likely explanation?

Clue words in this question

Noticing these words before you look at the options changes how you read each choice.

  • Clue: "most likely"

    Why it matters: Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.

Question 1easymultiple choice
Read the full NAT/PAT explanation →

Exhibit

Refer to the exhibit.
```kusto
// KQL query in Microsoft Sentinel hunting
DeviceNetworkEvents
| where Timestamp > ago(7d)
| where RemotePort == 445
| summarize TotalConnections = count() by DeviceName, RemoteIP
| where TotalConnections > 100
| project DeviceName, RemoteIP, TotalConnections
```

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

DC01 is performing normal domain operations like Group Policy distribution

A domain controller (DC01) making many outbound SMB connections to unique IPs is typical for normal activity like Group Policy processing or logon scripts. Option A (malware) is possible but less likely given it's a DC. Option C (scanning) is possible but not most likely. Option D (data exfiltration) is unlikely. The correct answer is B: normal DC behavior.

Key principle: NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.

Answer analysis

Option-by-option breakdown

For each option: why learners choose it and why it is or isn't the right answer here.

  • DC01 is exfiltrating data via SMB

    Why it's wrong here

    Data exfiltration via SMB is uncommon and would not target many IPs.

  • DC01 is scanning the network for open SMB shares

    Why it's wrong here

    Less likely for a DC; scanning is more suspicious.

  • DC01 is compromised and spreading malware

    Why it's wrong here

    Possible but not the most likely explanation for a DC.

  • DC01 is performing normal domain operations like Group Policy distribution

    Why this is correct

    Domain controllers commonly connect to many clients via SMB for management.

    Clue confirmation

    The clue word "most likely" in the question point toward this answer.

    Related concept

    Static NAT maps one inside address to one outside address.

Common exam traps

Common exam trap: NAT rules depend on direction and matching traffic

NAT is not only about the public address. The inside/outside interface roles and the ACL or rule that matches traffic are just as important.

Detailed technical explanation

How to think about this question

NAT questions usually test address translation, overload/PAT behaviour, static mappings and whether the right traffic is being translated. Read the interface direction and address terms carefully.

KKey Concepts to Remember

  • Static NAT maps one inside address to one outside address.
  • PAT allows many inside hosts to share one public address using ports.
  • Inside local and inside global describe the private and translated addresses.
  • NAT ACLs identify traffic for translation, not always security filtering.

TExam Day Tips

  • Identify inside and outside interfaces first.
  • Check whether the scenario needs static NAT, dynamic NAT or PAT.
  • Do not confuse NAT matching ACLs with normal packet-filtering intent.

Key takeaway

NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.

Real-world example

How this comes up in practice

A healthcare organisation deploys an application with a public-facing web tier and a private database tier. The database subnet has no public IP and only accepts connections from the web tier's security group. Questions like this test whether you can design cloud network isolation using VNets/VPCs, subnets, and security group rules.

What to study next

Got this wrong? Here's your next step.

Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related SC-200 NAT questions on configuration and troubleshooting.

Related practice questions

Related SC-200 practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Practice this exam

Start a free SC-200 practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

FAQ

Questions learners often ask

What does this SC-200 question test?

Perform threat hunting — This question tests Perform threat hunting — Static NAT maps one inside address to one outside address..

What is the correct answer to this question?

The correct answer is: DC01 is performing normal domain operations like Group Policy distribution — A domain controller (DC01) making many outbound SMB connections to unique IPs is typical for normal activity like Group Policy processing or logon scripts. Option A (malware) is possible but less likely given it's a DC. Option C (scanning) is possible but not most likely. Option D (data exfiltration) is unlikely. The correct answer is B: normal DC behavior.

What should I do if I get this SC-200 question wrong?

Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related SC-200 NAT questions on configuration and troubleshooting.

Are there clue words in this question I should notice?

Yes — watch for: "most likely". Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.

What is the key concept behind this question?

Static NAT maps one inside address to one outside address.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Last reviewed: Jun 21, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This SC-200 practice question is part of Courseiva's free Microsoft certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the SC-200 exam.