- A
Enable forwarded traffic on both peerings and disable gateway transit.
Why wrong: Forwarded traffic allows traffic that originated elsewhere, but it does not let the spoke use the hub gateway for transit.
- B
Enable gateway transit on the hub peering and Use remote gateways on the spoke peering.
This is the correct hub-and-spoke gateway sharing configuration. The hub peering must allow gateway transit, and the spoke peering must use the remote gateway in the hub. Together, these settings let the spoke route on-premises traffic through the hub VPN gateway without deploying a second gateway.
- C
Create a second VPN gateway in the spoke and peer the two gateways.
Why wrong: That would add unnecessary cost and complexity and is not required for shared gateway transit.
- D
Configure the spoke subnet with a service endpoint to the hub gateway subnet.
Why wrong: Service endpoints are for supported Azure PaaS services, not for routing traffic through a VPN gateway.
Quick Answer
The correct answer is to enable gateway transit on the hub peering and use remote gateways on the spoke peering. This configuration works because VNet peering is non-transitive by default, meaning a peered spoke cannot automatically reach the hub’s VPN gateway unless you explicitly allow it. Gateway transit on the hub side marks the hub as a gateway provider, while use remote gateways on the spoke side tells the spoke to accept and route traffic through that remote gateway, effectively creating a transitive route for on-premises traffic without deploying a separate gateway in the spoke. On the AZ-104 exam, this scenario tests your understanding of transitive routing via peering and is a common trap where candidates mistakenly enable gateway transit on both sides or forget the spoke’s use remote gateways setting. A simple memory tip is: the hub gives transit, the spoke uses it—think of the hub as the “transit hub” and the spoke as the “remote user.”
AZ-104 Implement and Manage Storage Practice Question
This AZ-104 practice question tests your understanding of implement and manage storage. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A hub VNet contains a VPN gateway that provides access to on-premises resources. A spoke VNet is peered to the hub and must send on-premises traffic through the hub gateway without deploying its own gateway. What peering configuration is required?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Enable gateway transit on the hub peering and Use remote gateways on the spoke peering.
Option B is correct because to route spoke VNet traffic through the hub VPN gateway without deploying a separate gateway in the spoke, you must enable 'Use remote gateways' on the spoke peering and 'Gateway transit' on the hub peering. This configuration allows the spoke to use the hub's VPN gateway for on-premises connectivity, leveraging the transitive routing capability of VNet peering.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
Enable forwarded traffic on both peerings and disable gateway transit.
Why it's wrong here
Forwarded traffic allows traffic that originated elsewhere, but it does not let the spoke use the hub gateway for transit.
- ✓
Enable gateway transit on the hub peering and Use remote gateways on the spoke peering.
Why this is correct
This is the correct hub-and-spoke gateway sharing configuration. The hub peering must allow gateway transit, and the spoke peering must use the remote gateway in the hub. Together, these settings let the spoke route on-premises traffic through the hub VPN gateway without deploying a second gateway.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
Create a second VPN gateway in the spoke and peer the two gateways.
Why it's wrong here
That would add unnecessary cost and complexity and is not required for shared gateway transit.
- ✗
Configure the spoke subnet with a service endpoint to the hub gateway subnet.
Common exam traps
Common exam trap: answer the scenario, not the keyword
The trap here is that candidates often confuse 'forwarded traffic' with 'gateway transit'—forwarded traffic only allows traffic from a third VNet to pass through the peering, but it does not enable the hub's VPN gateway to be used by the spoke; gateway transit is the specific setting required for this scenario.
Detailed technical explanation
How to think about this question
Under the hood, VNet peering does not inherently support transitive routing; 'Gateway transit' on the hub peering explicitly allows the hub's gateway to advertise routes to the spoke, while 'Use remote gateways' on the spoke peering enables the spoke to accept those routes and forward traffic to the hub gateway. This configuration works with both VPN and ExpressRoute gateways, but the spoke must not have its own gateway configured, as that would conflict with the remote gateway setting. In a real-world scenario, this is commonly used in hub-and-spoke topologies to centralize connectivity and reduce costs.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
TExam Day Tips
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A company's IT admin needs to give a contractor read-only access to production logs without sharing account credentials. Using role-based access control (RBAC) and temporary scoped permissions — not a permanent shared password — is the correct pattern. Questions like this test whether you can apply least-privilege access across cloud identity services.
What to study next
Got this wrong? Here's your next step.
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
- →
Implement and Manage Storage — study guide chapter
Learn the concepts, then practise the questions
- →
Implement and Manage Storage practice questions
Targeted practice on this topic area only
- →
All AZ-104 questions
1,170 questions across all exam domains
- →
AZ-104 study guide
Full concept coverage aligned to exam objectives
- →
AZ-104 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related AZ-104 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Manage Azure Identities and Governance practice questions
Practise AZ-104 questions linked to Manage Azure Identities and Governance.
Implement and Manage Storage practice questions
Practise AZ-104 questions linked to Implement and Manage Storage.
Deploy and Manage Azure Compute practice questions
Practise AZ-104 questions linked to Deploy and Manage Azure Compute.
Implement and Manage Virtual Networking practice questions
Practise AZ-104 questions linked to Implement and Manage Virtual Networking.
Monitor and Maintain Azure Resources practice questions
Practise AZ-104 questions linked to Monitor and Maintain Azure Resources.
AZ-104 Azure RBAC practice questions
Practise AZ-104 questions linked to AZ-104 Azure RBAC.
AZ-104 storage account practice questions
Practise AZ-104 questions linked to AZ-104 storage account.
AZ-104 virtual network practice questions
Practise AZ-104 questions linked to AZ-104 virtual network.
AZ-104 NSG practice questions
Practise AZ-104 questions linked to AZ-104 NSG.
AZ-104 Azure Monitor practice questions
Practise AZ-104 questions linked to AZ-104 Azure Monitor.
AZ-104 backup practice questions
Practise AZ-104 questions linked to AZ-104 backup.
AZ-104 managed identity practice questions
Practise AZ-104 questions linked to AZ-104 managed identity.
Practice this exam
Start a free AZ-104 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this AZ-104 question test?
Implement and Manage Storage — This question tests Implement and Manage Storage — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: Enable gateway transit on the hub peering and Use remote gateways on the spoke peering. — Option B is correct because to route spoke VNet traffic through the hub VPN gateway without deploying a separate gateway in the spoke, you must enable 'Use remote gateways' on the spoke peering and 'Gateway transit' on the hub peering. This configuration allows the spoke to use the hub's VPN gateway for on-premises connectivity, leveraging the transitive routing capability of VNet peering.
What should I do if I get this AZ-104 question wrong?
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More AZ-104 practice questions
- A storage automation service principal must upload, read, and delete blob data in one container by using Microsoft Entra…
- A subnet contains several application servers. You need to allow inbound TCP 3389 only from a management subnet named Su…
- A subscription admin wants to investigate who changed a resource and also review the platform-generated events for that…
- Based on the exhibit, which Azure feature should the administrator use to track this kind of platform-wide service issue…
- An administrator wants a script running on an Azure VM to create a resource in Azure without storing any passwords or cl…
- A PowerShell script runs on an Azure VM every night and uses Azure CLI commands to create tags and VM resources in anoth…
Last reviewed: Jun 11, 2026
This AZ-104 practice question is part of Courseiva's free Microsoft certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the AZ-104 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.