ees-that-the-interface-ge-425dr","questionText":"Refer to the exhibit. An engineer sees that the interface ge-0/0/0 has 'Admin up' and 'Link up'. What does this indicate?","explanation":"When an interface shows 'Admin up' and 'Link up', it means the interface has been administratively enabled (no 'shutdown' command applied) and the physical layer has detected a carrier signal from the connected device. In Junos, this is the normal operational state for a functioning interface, confirming that both the administrative configuration and the physical link are active.","domainId":"575e9c0c-9bb2-4315-add3-c2b336ebc5a0","difficulty":"medium","questionType":"multiple_choice","pbqConfig":null,"exhibitText":"show interfaces terse ge-0/0/0\nInterface Admin Link Proto Local Remote\nge-0/0/0 up up inet 192.168.1.1/24\n inet6 fe80::1/64","options":[{"id":"52699b99-a16e-47f5-9fb4-d7f0b64bc357","label":null,"text":"The interface is administratively down.","isCorrect":false},{"id":"837a7cfe-dd61-4e00-aa01-7e0a6d32eb8e","label":null,"text":"The interface is a loopback interface.","isCorrect":false},{"id":"afd713f6-c8b2-4139-8286-cf3caa79a729","label":null,"text":"The interface has an IPv6 address only.","isCorrect":false},{"id":"aaca0115-9344-44a7-9c92-26dde444b9e7","label":null,"text":"The interface is up and the physical link is up.","isCorrect":true}],"domainName":"User Interfaces","domainSlug":"junos-user-interfaces"},{"id":"4e01f4d0-2f7c-4371-9aea-aa517f3b021c","slug":"order-the-steps-to-configure-firewall-filters-acls-in-juno-ajjt5","questionText":"Order the steps to configure firewall filters (ACLs) in Junos.","explanation":"Firewall filters are defined with terms (match conditions and actions) and applied to interfaces.","domainId":"dfaf8ccd-3845-4857-8073-bd12146f2799","difficulty":"medium","questionType":"drag_order","pbqConfig":{"steps":["Enter configuration mode with 'configure'","Define a filter term with 'set firewall family inet filter term from '","Define the action with 'set firewall family inet filter term then '","Apply the filter to an interface with 'set interfaces unit 0 family inet filter input '","Commit and verify with 'show firewall filter '"],"pbq_type":"drag_order"},"exhibitText":null,"options":[{"id":"8dfcc0ac-d910-49fe-b2f8-d212925a84c8","label":null,"text":"First configure match conditions, then configure the action, and finally apply the filter to the interface.","isCorrect":true},{"id":"764a6810-f741-4432-a548-12200138aca7","label":null,"text":"First apply the filter to the interface, then configure match conditions, then configure the action.","isCorrect":false},{"id":"b079cbd7-3296-496a-9669-f7b6ceb77609","label":null,"text":"First configure the action, then configure match conditions, then apply the filter to the interface.","isCorrect":false},{"id":"d047ed7c-2b0c-422f-b97b-74b397452028","label":null,"text":"First configure match conditions, then apply the filter to the interface, then configure the action.","isCorrect":false}],"domainName":"Routing Fundamentals","domainSlug":"routing-fundamentals","orderedSteps":["Enter configuration mode with 'configure'","Define a filter term with 'set firewall family inet filter term from '","Define the action with 'set firewall family inet filter term then '","Apply the filter to an interface with 'set interfaces unit 0 family inet filter input '","Commit and verify with 'show firewall filter '"]}],"pbqCount":0,"timed":true,"studyMode":false,"durationSeconds":5400,"vendorSlug":"juniper-networks","examSlug":"juniper-jncia-junos","examName":"Juniper Networks Certified Associate Junos JNCIA-Junos","examCode":"JN0-106","isGuest":true,"examTrackId":"92d28b04-98fa-459c-936c-a41582bc208a","userId":"$undefined"}]