- A
1. Order Cloud Interconnect, 2. Create VLAN attachment, 3. Complete cross-connect, 4. Configure BGP session, 5. Verify connectivity
This is the correct order because you must first order the connection, then create a VLAN attachment to define the logical link, then complete the physical cross-connect, then configure BGP to establish routing, and finally verify everything works.
- B
1. Create VLAN attachment, 2. Order Cloud Interconnect, 3. Complete cross-connect, 4. Configure BGP session, 5. Verify connectivity
Why wrong: This is incorrect because you cannot create a VLAN attachment without first placing an order for Cloud Interconnect, as the VLAN attachment references the interconnection resources.
- C
1. Order Cloud Interconnect, 2. Complete cross-connect, 3. Create VLAN attachment, 4. Configure BGP session, 5. Verify connectivity
Why wrong: This is incorrect because the cross-connect should be completed after creating the VLAN attachment; the VLAN attachment provides the necessary IP addressing and cloud-side configuration for the physical link.
- D
1. Order Cloud Interconnect, 2. Configure BGP session, 3. Create VLAN attachment, 4. Complete cross-connect, 5. Verify connectivity
Why wrong: This is incorrect because BGP configuration requires the VLAN attachment and cross-connect to be in place first; BGP sessions cannot be established without a working Layer 2 connection.
Cloud Interconnect Setup Steps
This PCNE practice question tests your understanding of pcne exam topics. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Drag and drop the steps to set up a Cloud Interconnect connection for dedicated on-premises connectivity into the correct order.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
1. Order Cloud Interconnect, 2. Create VLAN attachment, 3. Complete cross-connect, 4. Configure BGP session, 5. Verify connectivity
Cloud Interconnect requires ordering, VLAN attachment, cross-connect, BGP, and verification.
Key principle: A trunk being up does not mean the VLAN is allowed across it. Always verify the allowed VLAN list and whether the VLAN exists on both switches.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
1. Order Cloud Interconnect, 2. Create VLAN attachment, 3. Complete cross-connect, 4. Configure BGP session, 5. Verify connectivity
Why this is correct
This is the correct order because you must first order the connection, then create a VLAN attachment to define the logical link, then complete the physical cross-connect, then configure BGP to establish routing, and finally verify everything works.
Related concept
Access ports place end devices into a single VLAN.
- ✗
1. Create VLAN attachment, 2. Order Cloud Interconnect, 3. Complete cross-connect, 4. Configure BGP session, 5. Verify connectivity
Why it's wrong here
This is incorrect because you cannot create a VLAN attachment without first placing an order for Cloud Interconnect, as the VLAN attachment references the interconnection resources.
- ✗
1. Order Cloud Interconnect, 2. Complete cross-connect, 3. Create VLAN attachment, 4. Configure BGP session, 5. Verify connectivity
Why it's wrong here
This is incorrect because the cross-connect should be completed after creating the VLAN attachment; the VLAN attachment provides the necessary IP addressing and cloud-side configuration for the physical link.
- ✗
1. Order Cloud Interconnect, 2. Configure BGP session, 3. Create VLAN attachment, 4. Complete cross-connect, 5. Verify connectivity
Common exam traps
Common exam trap: an active trunk can still block the VLAN you need
A trunk being up does not prove every VLAN is crossing it. Check allowed VLAN lists, native VLAN mismatch, VLAN existence and access-port assignment.
Detailed technical explanation
How to think about this question
VLAN questions usually combine access-port and trunking clues. The key is to identify whether the issue is local to one switchport, caused by the trunk, or caused by the VLAN not existing where it needs to exist.
KKey Concepts to Remember
- Access ports place end devices into a single VLAN.
- Trunk ports carry multiple VLANs between switches.
- Allowed VLAN lists decide which VLANs can cross a trunk.
- Native VLAN mismatch can create confusing symptoms.
TExam Day Tips
- Use show vlan brief to verify access VLANs.
- Use show interfaces trunk to verify trunk state and allowed VLANs.
- Do not treat every same-VLAN issue as a routing problem.
Key takeaway
A trunk being up does not mean the VLAN is allowed across it. Always verify the allowed VLAN list and whether the VLAN exists on both switches.
Real-world example
How this comes up in practice
A cloud solutions architect for a retail company is evaluating services for a new workload. The correct answer here reflects best practice for the specific scenario described — not a general cloud recommendation. A trunk being up does not mean the VLAN is allowed across it. Always verify the allowed VLAN list and whether the VLAN exists on both switches. Cloud exam questions reward reading the constraint carefully: the same technology can be right or wrong depending on the use case.
Visual reference
What to study next
Got this wrong? Here's your next step.
Review VLAN allowed lists, native VLAN mismatch detection, and how to verify VLAN membership with show vlan brief and show interfaces trunk. Then practise related PCNE questions on switching, trunking, and access-port configuration.
Related practice questions
Related PCNE practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Configuring Network Services practice questions
Practise PCNE questions linked to Configuring Network Services.
Implementing Hybrid Interconnectivity practice questions
Practise PCNE questions linked to Implementing Hybrid Interconnectivity.
Managing, Monitoring, and Optimising Network Operations practice questions
Practise PCNE questions linked to Managing, Monitoring, and Optimising Network Operations.
Designing, Planning, and Prototyping a GCP Network practice questions
Practise PCNE questions linked to Designing, Planning, and Prototyping a GCP Network.
Implementing VPC Instances practice questions
Practise PCNE questions linked to Implementing VPC Instances.
Implementing network security practice questions
Practise PCNE questions linked to Implementing network security.
Implementing a Virtual Private Cloud practice questions
Practise PCNE questions linked to Implementing a Virtual Private Cloud.
PCNE fundamentals practice questions
Practise PCNE questions linked to PCNE fundamentals.
PCNE scenario practice questions
Practise PCNE questions linked to PCNE scenario.
PCNE troubleshooting practice questions
Practise PCNE questions linked to PCNE troubleshooting.
Practice this exam
Start a free PCNE practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this PCNE question test?
Access ports place end devices into a single VLAN.
What is the correct answer to this question?
The correct answer is: 1. Order Cloud Interconnect, 2. Create VLAN attachment, 3. Complete cross-connect, 4. Configure BGP session, 5. Verify connectivity — Cloud Interconnect requires ordering, VLAN attachment, cross-connect, BGP, and verification.
What should I do if I get this PCNE question wrong?
Review VLAN allowed lists, native VLAN mismatch detection, and how to verify VLAN membership with show vlan brief and show interfaces trunk. Then practise related PCNE questions on switching, trunking, and access-port configuration.
What is the key concept behind this question?
Access ports place end devices into a single VLAN.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More PCNE practice questions
- An organization is migrating to Google Cloud and requires connectivity between their on-premises network and VPC. They p…
- A company is migrating on-premises DNS to Google Cloud. They have a hybrid network using Cloud VPN and want to resolve o…
- A network engineer is configuring a Cloud Router for BGP peering with an on-premises router over a VPN tunnel. The on-pr…
- A company uses Cloud NAT to allow private instances to reach the internet. They notice that egress traffic from Compute…
- You are setting up Partner Interconnect with a service provider that offers both Layer 2 and Layer 3 options. Your on-pr…
- Match each VPC networking concept to its definition.
Last reviewed: Jun 11, 2026
This PCNE practice question is part of Courseiva's free Google Cloud certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the PCNE exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.