- A
Internal load balancers are regional; clients must be in the same region as the load balancer when using VPC peering.
Internal TCP/UDP LBs are regional and only accept connections from VPCs in the same region via peering.
- B
The VPC peering connection does not propagate routes for the load balancer IP.
Why wrong: VPC peering exports all subnet routes, including the internal IP address of the load balancer.
- C
The backend instances are unhealthy and the load balancer is not serving traffic.
Why wrong: The stem does not mention health check issues, and even if backends were unhealthy, the load balancer would still accept connections and return errors.
- D
Firewall rules in VPC-B are not allowing egress to the load balancer IP.
Why wrong: Egress firewall rules are permissive by default in VPC, and the engineer verified they allow traffic.
Internal Load Balancer Not Accessible Over VPC Peering Due to Region
This PCNE practice question tests your understanding of pcne exam topics. The scenario asks you to isolate a root cause — eliminate options that address a different problem before choosing. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A company has two VPC networks (VPC-A and VPC-B) in the same project. They are connected via VPC peering. VPC-A contains an internal TCP load balancer with IP 10.1.2.3 serving on port 80. VPC-B needs to access this load balancer. The network engineer has verified that the firewall rules allow traffic from VPC-B to the load balancer's IP and port. However, instances in VPC-B cannot connect to 10.1.2.3:80. What is the most likely reason for this failure?
Clue words in this question
Noticing these words before you look at the options changes how you read each choice.
Clue:
"most likely"Why it matters: Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.
Quick Answer
The answer is that the internal load balancer is not accessible over VPC peering because internal load balancers are regional resources, and clients must reside in the same region as the load balancer when using VPC peering. This is the most likely reason for the failure: even with correct firewall rules, an internal TCP load balancer in us-central1, for example, will not accept traffic from instances in VPC-B located in us-west1 over a VPC peering connection. The Google Professional Cloud Network Engineer exam tests this specific regional restriction to ensure you understand that internal load balancers lack cross-region support via peering—unlike external load balancers, which can use global access. A common trap is assuming VPC peering makes all resources globally reachable, but internal LBs remain region-bound unless you use a proxy or Network Connectivity Center. Memory tip: “Internal is regional, peering is regional—same region or no connection.”
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Internal load balancers are regional; clients must be in the same region as the load balancer when using VPC peering.
Option A is correct: Internal TCP/UDP load balancers are regional and only accept traffic from clients in the same region when using VPC peering. If VPC-B's instances are in a different region than the load balancer, they cannot reach it via peering unless the load balancer has global access enabled (which is only available for external LBs). Option B is incorrect: VPC peering does propagate subnets, but the issue is not routing; it's the regional constraint. Option C is incorrect: Health checks affect the load balancer's ability to send traffic to backends, not clients' ability to connect to the load balancer IP. Option D is incorrect: Firewall rules were already verified as allowing traffic.
Key principle: Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
Internal load balancers are regional; clients must be in the same region as the load balancer when using VPC peering.
- ✗
The VPC peering connection does not propagate routes for the load balancer IP.
Why it's wrong here
VPC peering exports all subnet routes, including the internal IP address of the load balancer.
- ✗
The backend instances are unhealthy and the load balancer is not serving traffic.
Why it's wrong here
The stem does not mention health check issues, and even if backends were unhealthy, the load balancer would still accept connections and return errors.
- ✗
Firewall rules in VPC-B are not allowing egress to the load balancer IP.
Why it's wrong here
Egress firewall rules are permissive by default in VPC, and the engineer verified they allow traffic.
Common exam traps
Common exam trap: usable hosts are not the same as total addresses
Subnetting questions often tempt you into counting all addresses. In normal IPv4 subnets, the network and broadcast addresses are not usable host addresses.
Detailed technical explanation
How to think about this question
Subnetting questions test whether you can identify the network, broadcast address, usable range, mask and correct subnet. Slow down enough to calculate the block size correctly.
KKey Concepts to Remember
- CIDR notation defines the prefix length.
- Block size helps identify subnet boundaries.
- Network and broadcast addresses are not usable hosts in normal IPv4 subnets.
- The required host count determines the smallest suitable subnet.
TExam Day Tips
- Write the block size before choosing the subnet.
- Check whether the question asks for hosts, subnets or a specific address range.
- Do not confuse /24, /25, /26 and /27 host counts.
Key takeaway
Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.
Real-world example
How this comes up in practice
A company's IT admin needs to give a contractor read-only access to production logs without sharing account credentials. Using role-based access control (RBAC) and temporary scoped permissions — not a permanent shared password — is the correct pattern. Questions like this test whether you can apply least-privilege access across cloud identity services.
Visual reference
What to study next
Got this wrong? Here's your next step.
Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related PCNE subnetting questions on CIDR, address ranges, and subnet selection.
Related practice questions
Related PCNE practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Configuring Network Services practice questions
Practise PCNE questions linked to Configuring Network Services.
Implementing Hybrid Interconnectivity practice questions
Practise PCNE questions linked to Implementing Hybrid Interconnectivity.
Managing, Monitoring, and Optimising Network Operations practice questions
Practise PCNE questions linked to Managing, Monitoring, and Optimising Network Operations.
Designing, Planning, and Prototyping a GCP Network practice questions
Practise PCNE questions linked to Designing, Planning, and Prototyping a GCP Network.
Implementing VPC Instances practice questions
Practise PCNE questions linked to Implementing VPC Instances.
Implementing network security practice questions
Practise PCNE questions linked to Implementing network security.
Implementing a Virtual Private Cloud practice questions
Practise PCNE questions linked to Implementing a Virtual Private Cloud.
PCNE fundamentals practice questions
Practise PCNE questions linked to PCNE fundamentals.
PCNE scenario practice questions
Practise PCNE questions linked to PCNE scenario.
PCNE troubleshooting practice questions
Practise PCNE questions linked to PCNE troubleshooting.
Practice this exam
Start a free PCNE practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this PCNE question test?
CIDR notation defines the prefix length.
What is the correct answer to this question?
The correct answer is: Internal load balancers are regional; clients must be in the same region as the load balancer when using VPC peering. — Option A is correct: Internal TCP/UDP load balancers are regional and only accept traffic from clients in the same region when using VPC peering. If VPC-B's instances are in a different region than the load balancer, they cannot reach it via peering unless the load balancer has global access enabled (which is only available for external LBs). Option B is incorrect: VPC peering does propagate subnets, but the issue is not routing; it's the regional constraint. Option C is incorrect: Health checks affect the load balancer's ability to send traffic to backends, not clients' ability to connect to the load balancer IP. Option D is incorrect: Firewall rules were already verified as allowing traffic.
What should I do if I get this PCNE question wrong?
Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related PCNE subnetting questions on CIDR, address ranges, and subnet selection.
Are there clue words in this question I should notice?
Yes — watch for: "most likely". Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.
What is the key concept behind this question?
CIDR notation defines the prefix length.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More PCNE practice questions
- An organization is migrating to Google Cloud and requires connectivity between their on-premises network and VPC. They p…
- A company is migrating on-premises DNS to Google Cloud. They have a hybrid network using Cloud VPN and want to resolve o…
- A network engineer is configuring a Cloud Router for BGP peering with an on-premises router over a VPN tunnel. The on-pr…
- A company uses Cloud NAT to allow private instances to reach the internet. They notice that egress traffic from Compute…
- You are setting up Partner Interconnect with a service provider that offers both Layer 2 and Layer 3 options. Your on-pr…
- Match each VPC networking concept to its definition.
Last reviewed: Jun 24, 2026
This PCNE practice question is part of Courseiva's free Google Cloud certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the PCNE exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.