- A
Configure MED values on the on-premises router to prefer the us-central1 interconnect.
Correct. By setting a lower MED on the on-premises router for routes from the us-central1 interconnect, traffic will prefer that path.
- B
Configure BGP communities on Google Cloud to prefer the us-central1 interconnect.
Why wrong: Incorrect. BGP communities on Google Cloud can tag routes, but on-premises routers must be configured to interpret them; however, this does not directly influence on-premises inbound path selection in this scenario.
- C
Configure AS path prepending on the on-premises router to make the us-central1 path longer.
Why wrong: Incorrect. AS path prepending makes the path longer, which decreases preference, so it would not make the us-central1 path preferred.
- D
Use Cloud Router's custom route advertisements to influence path selection.
Why wrong: Incorrect. Cloud Router's custom route advertisements control what routes are advertised to on-premises, but they do not directly influence which path on-premises traffic takes inbound.
Using BGP Multi-Exit Discriminator for Active/Backup Dedicated Interconnect
This PCNE practice question tests your understanding of a company has two dedicated interconnect…. The scenario asks you to isolate a root cause — eliminate options that address a different problem before choosing. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A company has two Dedicated Interconnect connections to two separate Google Cloud regions for redundancy. They use Cloud Router with BGP to exchange routes. They want to ensure that traffic from on-premises to a specific VPC in us-central1 uses only the interconnect to us-central1, and the other interconnect is used only as a backup. How can they achieve this?
Quick Answer
The answer is to configure MED values on the on-premises router to prefer the us-central1 interconnect. This works because the Multi-Exit Discriminator (MED) is a BGP metric that influences inbound traffic from a neighboring AS, telling it which path to use when multiple entry points exist. By setting a lower MED on the routes advertised via the us-central1 interconnect, the on-premises network will actively send traffic through that link, while the other interconnect remains a backup, only used if the primary fails. On the Google Professional Cloud Network Engineer exam, this scenario tests your understanding of BGP path selection and how to manipulate inbound traffic without changing outbound routing—a common trap is confusing MED with Local Preference, which controls outbound traffic instead. Remember: MED is for incoming traffic preference, so think “MED for my entry door.”
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Configure MED values on the on-premises router to prefer the us-central1 interconnect.
Option A is correct because Multi-Exit Discriminator (MED) is a BGP attribute used to influence inbound traffic from an AS to a specific entry point. By setting a lower MED value on the on-premises router for the routes advertised via the us-central1 interconnect, the on-premises network will prefer that path for traffic destined to the VPC in us-central1. The other interconnect will only be used if the preferred path fails, providing the desired active/backup behavior.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
Configure MED values on the on-premises router to prefer the us-central1 interconnect.
Why this is correct
Correct. By setting a lower MED on the on-premises router for routes from the us-central1 interconnect, traffic will prefer that path.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
Configure BGP communities on Google Cloud to prefer the us-central1 interconnect.
Why it's wrong here
Incorrect. BGP communities on Google Cloud can tag routes, but on-premises routers must be configured to interpret them; however, this does not directly influence on-premises inbound path selection in this scenario.
- ✗
Configure AS path prepending on the on-premises router to make the us-central1 path longer.
Why it's wrong here
Incorrect. AS path prepending makes the path longer, which decreases preference, so it would not make the us-central1 path preferred.
- ✗
Use Cloud Router's custom route advertisements to influence path selection.
Why it's wrong here
Incorrect. Cloud Router's custom route advertisements control what routes are advertised to on-premises, but they do not directly influence which path on-premises traffic takes inbound.
Common exam traps
Common exam trap: answer the scenario, not the keyword
Candidates often mistakenly believe that Google Cloud can influence inbound path selection via BGP communities or custom route advertisements, but these affect outbound traffic from Google Cloud. For inbound path selection, the on-premises router must set a lower MED value on the preferred interconnect.
Trap categories for this question
Scenario analysis trap
Incorrect. BGP communities on Google Cloud can tag routes, but on-premises routers must be configured to interpret them; however, this does not directly influence on-premises inbound path selection in this scenario.
Detailed technical explanation
How to think about this question
MED is an optional non-transitive BGP attribute that is compared only when paths come from the same neighboring AS. In this scenario, both interconnects connect to Google's AS (15169), so MED values are compared. Setting a lower MED (e.g., 100) on the us-central1 interconnect and a higher MED (e.g., 200) on the other makes the on-premises router prefer the lower MED path. This is a common technique for traffic engineering in multi-homed environments, but note that MED is only considered if the 'bgp always-compare-med' command is not used, as it can cause unexpected behavior.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
TExam Day Tips
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
An e-commerce site experiences heavy traffic on Black Friday and near-zero traffic during off-peak weeks. Rather than provisioning permanent large VMs, the team uses auto-scaling groups that add capacity automatically under load and reduce it overnight. Questions like this test whether you understand elasticity, availability zones, and cloud compute scaling patterns.
What to study next
Got this wrong? Here's your next step.
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
Related practice questions
Related PCNE practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Configuring Network Services practice questions
Practise PCNE questions linked to Configuring Network Services.
Implementing Hybrid Interconnectivity practice questions
Practise PCNE questions linked to Implementing Hybrid Interconnectivity.
Managing, Monitoring, and Optimising Network Operations practice questions
Practise PCNE questions linked to Managing, Monitoring, and Optimising Network Operations.
Designing, Planning, and Prototyping a GCP Network practice questions
Practise PCNE questions linked to Designing, Planning, and Prototyping a GCP Network.
Implementing VPC Instances practice questions
Practise PCNE questions linked to Implementing VPC Instances.
Implementing network security practice questions
Practise PCNE questions linked to Implementing network security.
Implementing a Virtual Private Cloud practice questions
Practise PCNE questions linked to Implementing a Virtual Private Cloud.
PCNE fundamentals practice questions
Practise PCNE questions linked to PCNE fundamentals.
PCNE scenario practice questions
Practise PCNE questions linked to PCNE scenario.
PCNE troubleshooting practice questions
Practise PCNE questions linked to PCNE troubleshooting.
Practice this exam
Start a free PCNE practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this PCNE question test?
Read the scenario before looking for a memorised answer.
What is the correct answer to this question?
The correct answer is: Configure MED values on the on-premises router to prefer the us-central1 interconnect. — Option A is correct because Multi-Exit Discriminator (MED) is a BGP attribute used to influence inbound traffic from an AS to a specific entry point. By setting a lower MED value on the on-premises router for the routes advertised via the us-central1 interconnect, the on-premises network will prefer that path for traffic destined to the VPC in us-central1. The other interconnect will only be used if the preferred path fails, providing the desired active/backup behavior.
What should I do if I get this PCNE question wrong?
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More PCNE practice questions
- An organization is migrating to Google Cloud and requires connectivity between their on-premises network and VPC. They p…
- A company is migrating on-premises DNS to Google Cloud. They have a hybrid network using Cloud VPN and want to resolve o…
- A network engineer is configuring a Cloud Router for BGP peering with an on-premises router over a VPN tunnel. The on-pr…
- A company uses Cloud NAT to allow private instances to reach the internet. They notice that egress traffic from Compute…
- You are setting up Partner Interconnect with a service provider that offers both Layer 2 and Layer 3 options. Your on-pr…
- Match each VPC networking concept to its definition.
Last reviewed: Jun 25, 2026
This PCNE practice question is part of Courseiva's free Google Cloud certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the PCNE exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.