- A
The router will export NetFlow version 9 records containing IPv4 source and destination addresses, protocol, and packet/byte counts.
The record 'netflow ipv4 original-input' is a predefined Flexible NetFlow record that matches traditional NetFlow fields (source/destination IP, protocol, etc.) and exports them in NetFlow v9 format.
- B
The router will export NetFlow version 5 records because the exporter uses UDP port 2055.
Why wrong: The record type determines the export format; 'netflow ipv4 original-input' uses NetFlow v9, not v5. The UDP port does not dictate the version.
- C
The flow monitor will only collect traffic on the input direction of GigabitEthernet0/2, but no export will occur because the exporter is not applied to the monitor.
Why wrong: The exporter is correctly applied under the flow monitor configuration with the 'exporter EXPORTER-1' command.
- D
The flow monitor will export flows every 30 seconds only if the flow is idle for that period.
Why wrong: The 'cache timeout active 30' exports active flows every 30 seconds, not idle flows.
Understanding the netflow ipv4 original-input Record
This 300-410 practice question tests your understanding of netflow and flexible netflow. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Consider the following partial configuration on router R2:
flow exporter EXPORTER-1 destination 192.168.1.100 source Loopback0 transport udp 2055 ! flow monitor MONITOR-2 exporter EXPORTER-1 record netflow ipv4 original-input cache timeout active 30 !
interface GigabitEthernet0/2 ip flow monitor MONITOR-2 input
!
What is the effect of this configuration?
Quick Answer
The answer is that the router will export NetFlow version 9 records containing IPv4 source and destination addresses, protocol, and packet/byte counts. This is because the predefined record `netflow ipv4 original-input` instructs the flow monitor to capture the standard seven key fields—source IP, destination IP, source port, destination port, protocol, ToS, and input interface—along with essential counters like packets and bytes, all exported via the configured exporter using NetFlow version 9. On the Cisco CCNP ENARSI 300-410 exam, this configuration tests your understanding of how predefined records simplify flow monitoring; a common trap is confusing `original-input` with `original-output`, which would instead capture egress flow data. Remember that `original-input` always refers to the direction of traffic as it enters the interface, not the direction of the exported flow. A helpful memory tip: “Input is Incoming—it captures what hits the interface first.”
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
The router will export NetFlow version 9 records containing IPv4 source and destination addresses, protocol, and packet/byte counts.
This question tests knowledge of the 'record netflow ipv4 original-input' predefined record and its behavior.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
The router will export NetFlow version 9 records containing IPv4 source and destination addresses, protocol, and packet/byte counts.
Why this is correct
The record 'netflow ipv4 original-input' is a predefined Flexible NetFlow record that matches traditional NetFlow fields (source/destination IP, protocol, etc.) and exports them in NetFlow v9 format.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
The router will export NetFlow version 5 records because the exporter uses UDP port 2055.
Why it's wrong here
The record type determines the export format; 'netflow ipv4 original-input' uses NetFlow v9, not v5. The UDP port does not dictate the version.
- ✗
The flow monitor will only collect traffic on the input direction of GigabitEthernet0/2, but no export will occur because the exporter is not applied to the monitor.
Why it's wrong here
The exporter is correctly applied under the flow monitor configuration with the 'exporter EXPORTER-1' command.
- ✗
The flow monitor will export flows every 30 seconds only if the flow is idle for that period.
Why it's wrong here
The 'cache timeout active 30' exports active flows every 30 seconds, not idle flows.
Common exam traps
Common exam trap: answer the scenario, not the keyword
Many certification questions include familiar terms but test a specific constraint. Read the exact wording before choosing an answer that is generally true but wrong for this case.
Trap categories for this question
Command / output trap
The exporter is correctly applied under the flow monitor configuration with the 'exporter EXPORTER-1' command.
Detailed technical explanation
How to think about this question
This question should be treated as a scenario, not a definition check. Identify the problem, the constraint and the best action. Then compare each option against those facts.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
- Use explanations to understand the rule behind the answer.
TExam Day Tips
- Underline the problem statement mentally.
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A practitioner preparing for the 300-410 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
What to study next
Got this wrong? Here's your next step.
Identify which 300-410 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
- →
NetFlow and Flexible NetFlow — study guide chapter
Learn the concepts, then practise the questions
- →
NetFlow and Flexible NetFlow practice questions
Targeted practice on this topic area only
- →
All 300-410 questions
2,152 questions across all exam domains
- →
Cisco CCNP ENARSI 300-410 study guide
Full concept coverage aligned to exam objectives
- →
300-410 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 300-410 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Layer 3 Technologies practice questions
Practise 300-410 questions linked to Layer 3 Technologies.
EIGRP Troubleshooting practice questions
Practise 300-410 questions linked to EIGRP Troubleshooting.
OSPF Troubleshooting (v2/v3) practice questions
Practise 300-410 questions linked to OSPF Troubleshooting (v2/v3).
BGP Troubleshooting practice questions
Practise 300-410 questions linked to BGP Troubleshooting.
Route Redistribution practice questions
Practise 300-410 questions linked to Route Redistribution.
Policy-Based Routing (PBR) practice questions
Practise 300-410 questions linked to Policy-Based Routing (PBR).
VRF-Lite practice questions
Practise 300-410 questions linked to VRF-Lite.
Route Maps and Route Filtering practice questions
Practise 300-410 questions linked to Route Maps and Route Filtering.
Administrative Distance practice questions
Practise 300-410 questions linked to Administrative Distance.
Route Summarization practice questions
Practise 300-410 questions linked to Route Summarization.
Bidirectional Forwarding Detection (BFD) practice questions
Practise 300-410 questions linked to Bidirectional Forwarding Detection (BFD).
VPN Technologies practice questions
Practise 300-410 questions linked to VPN Technologies.
Practice this exam
Start a free 300-410 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 300-410 question test?
NetFlow and Flexible NetFlow — This question tests NetFlow and Flexible NetFlow — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: The router will export NetFlow version 9 records containing IPv4 source and destination addresses, protocol, and packet/byte counts. — This question tests knowledge of the 'record netflow ipv4 original-input' predefined record and its behavior.
What should I do if I get this 300-410 question wrong?
Identify which 300-410 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More 300-410 practice questions
- Drag and drop the steps to negotiate an IKEv2 IPsec site-to-site tunnel into the correct order, from first to last.
- Drag and drop the steps to troubleshoot an IPsec site-to-site VPN adjacency failure into the correct order, from first t…
- Drag and drop the steps to verify and validate the operational state of an IPsec site-to-site VPN into the correct order…
- Consider the following configuration snippet: ip cef ! interface GigabitEthernet0/0 ip address 10.0.0.1 255.255.255.25…
- A router is configured with 'logging host 10.1.1.100' and 'logging trap informational'. The engineer notices that syslog…
- Drag and drop the steps to configure a GRE tunnel for IPv6 over IPv4 into the correct order, from first to last.
Last reviewed: Jun 19, 2026
This 300-410 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 300-410 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.