- A
Ensure the firewall policy allows the SSH service (port 22)
The policy must explicitly permit the service (SSH) to match the traffic.
- B
Create a firewall policy from WAN to internal interface with destination set to the VIP
The firewall policy must allow traffic destined to the VIP.
- C
Configure a source NAT IP pool for outbound traffic
Why wrong: Source NAT is for outbound traffic, not inbound.
- D
Create a Virtual IP (VIP) mapping 203.0.113.10:22 to 10.0.1.10:22
The VIP translates the public IP and port to the private IP and port.
- E
Enable SSL inspection on the policy
Why wrong: SSL inspection is not required for SSH.
Quick Answer
The answer is that you must create a Virtual IP (VIP) mapping 203.0.113.10:22 to 10.0.1.10:22, then configure a firewall policy from the WAN to the internal server explicitly permitting the SSH service (TCP port 22), and finally ensure the destination of that policy references the VIP object. This sequence is required because the VIP translates the public IP and port to the private server, but the firewall policy acts as the security gatekeeper—without it, FortiGate drops all inbound packets even with a correct VIP. On the Fortinet NSE 4 Network Security Professional exam, this scenario tests your understanding of the strict separation between destination NAT (VIP) and stateful filtering (policy), a common trap where candidates forget the policy or use the wrong destination interface. A useful memory tip is “VIP maps, policy permits”—the VIP handles the address translation, but the policy must explicitly allow the SSH service object for the traffic to flow.
NSE4 Firewall Policies and NAT Practice Question
This NSE4 practice question tests your understanding of firewall policies and nat. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
An administrator needs to allow inbound SSH access from the internet to a specific internal server (10.0.1.10) on port 22. The WAN IP is 203.0.113.10. Which THREE configuration steps are required?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Ensure the firewall policy allows the SSH service (port 22)
Option A is correct because the firewall policy must explicitly permit the SSH service (TCP port 22) from the WAN to the internal server. Without a policy allowing the traffic, the FortiGate will drop the packets even if the VIP is configured correctly. The policy acts as the security gatekeeper, and the service object for SSH ensures only port 22 traffic is allowed.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
Ensure the firewall policy allows the SSH service (port 22)
Why this is correct
The policy must explicitly permit the service (SSH) to match the traffic.
Related concept
Read the scenario before looking for a memorised answer.
- ✓
Create a firewall policy from WAN to internal interface with destination set to the VIP
Why this is correct
The firewall policy must allow traffic destined to the VIP.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
Configure a source NAT IP pool for outbound traffic
Why it's wrong here
Source NAT is for outbound traffic, not inbound.
- ✓
Create a Virtual IP (VIP) mapping 203.0.113.10:22 to 10.0.1.10:22
Why this is correct
The VIP translates the public IP and port to the private IP and port.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
Enable SSL inspection on the policy
Common exam traps
Common exam trap: answer the scenario, not the keyword
The trap here is that candidates often assume configuring a VIP alone is sufficient, forgetting that a firewall policy must also be created to permit the translated traffic, and they may confuse source NAT (Option C) with destination NAT required for inbound access.
Detailed technical explanation
How to think about this question
A Virtual IP (VIP) on FortiGate performs destination NAT (DNAT), translating the public IP:port (203.0.113.10:22) to the private IP:port (10.0.1.10:22). The firewall policy must reference the VIP as the destination, and the policy's destination interface must be the internal interface. Without the policy, the VIP translation occurs but the traffic is still blocked by the implicit deny rule at the end of the policy list.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
TExam Day Tips
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A small business has 20 workstations on the 192.168.1.0/24 network and one public IP from its ISP. The router uses PAT (NAT overload) so all 20 devices share one public address using different source ports. NAT questions test whether you understand the four address terms and which direction each translation applies.
What to study next
Got this wrong? Here's your next step.
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
- →
Firewall Policies and NAT — study guide chapter
Learn the concepts, then practise the questions
- →
Firewall Policies and NAT practice questions
Targeted practice on this topic area only
- →
All NSE4 questions
1,000 questions across all exam domains
- →
Fortinet NSE 4 Network Security Professional NSE4 study guide
Full concept coverage aligned to exam objectives
- →
NSE4 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related NSE4 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
System and Network Administration practice questions
Practise NSE4 questions linked to System and Network Administration.
Firewall Policies and NAT practice questions
Practise NSE4 questions linked to Firewall Policies and NAT.
Authentication and VPN practice questions
Practise NSE4 questions linked to Authentication and VPN.
Security Profiles practice questions
Practise NSE4 questions linked to Security Profiles.
High Availability and Diagnostics practice questions
Practise NSE4 questions linked to High Availability and Diagnostics.
NSE4 fundamentals practice questions
Practise NSE4 questions linked to NSE4 fundamentals.
NSE4 scenario practice questions
Practise NSE4 questions linked to NSE4 scenario.
NSE4 troubleshooting practice questions
Practise NSE4 questions linked to NSE4 troubleshooting.
Practice this exam
Start a free NSE4 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this NSE4 question test?
Firewall Policies and NAT — This question tests Firewall Policies and NAT — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: Ensure the firewall policy allows the SSH service (port 22) — Option A is correct because the firewall policy must explicitly permit the SSH service (TCP port 22) from the WAN to the internal server. Without a policy allowing the traffic, the FortiGate will drop the packets even if the VIP is configured correctly. The policy acts as the security gatekeeper, and the service object for SSH ensures only port 22 traffic is allowed.
What should I do if I get this NSE4 question wrong?
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 24, 2026
This NSE4 practice question is part of Courseiva's free Fortinet certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the NSE4 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.