- A
Set the strategy to 'Manual'
Why wrong: Manual requires explicit selection.
- B
Set the strategy to 'Load Balance'
Why wrong: Load balance distributes traffic without considering latency.
- C
Configure an SD-WAN rule with a performance SLA that monitors latency and set strategy to 'Best Quality'
Best Quality selects the best performing interface based on SLA metrics.
- D
Use policy-based routing with a higher priority for voice traffic
Why wrong: Policy routing does not dynamically consider latency.
Quick Answer
The answer is to configure an SD-WAN rule with a performance SLA that monitors latency and set the strategy to 'Best Quality'. This is correct because the performance SLA continuously measures real-time latency on each WAN interface, and the 'Best Quality' strategy dynamically selects the interface with the lowest latency, ensuring voice traffic avoids jitter and delay for optimal call quality. On the Fortinet NSE 4 exam, this scenario tests your understanding of how SD-WAN rules integrate with SLA targets to enforce application-specific routing, often appearing as a multiple-choice trap where you must distinguish 'Best Quality' from 'Lowest Cost' or 'Manual' strategies. A common mistake is choosing 'Lowest Cost' for voice, but remember that voice quality demands the best performance, not the cheapest path. Memory tip: for voice, think "Best Quality for Best Clarity" — the SLA picks the fastest lane, not the cheapest toll road.
NSE4 System and Network Administration Practice Question
This NSE4 practice question tests your understanding of system and network administration. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A FortiGate is configured with two WAN interfaces in an SD-WAN zone. The administrator wants to ensure voice traffic uses the interface with the lowest latency. Which SD-WAN configuration should be used?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Configure an SD-WAN rule with a performance SLA that monitors latency and set strategy to 'Best Quality'
Option C is correct because SD-WAN rules with a performance SLA allow the FortiGate to monitor real-time latency on each WAN interface and dynamically route voice traffic to the interface with the lowest latency. The 'Best Quality' strategy selects the best-performing interface based on the SLA metrics, ensuring optimal voice quality.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
Set the strategy to 'Manual'
Why it's wrong here
Manual requires explicit selection.
- ✗
Set the strategy to 'Load Balance'
Why it's wrong here
Load balance distributes traffic without considering latency.
- ✓
Configure an SD-WAN rule with a performance SLA that monitors latency and set strategy to 'Best Quality'
Why this is correct
Best Quality selects the best performing interface based on SLA metrics.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
Use policy-based routing with a higher priority for voice traffic
Why it's wrong here
Policy routing does not dynamically consider latency.
Common exam traps
Common exam trap: answer the scenario, not the keyword
The trap here is that candidates often confuse policy-based routing (PBR) with SD-WAN rules, not realizing that PBR lacks dynamic SLA-based path selection and cannot automatically adapt to changing network conditions.
Detailed technical explanation
How to think about this question
The SD-WAN performance SLA uses probes (e.g., ICMP, HTTP, or UDP) to measure latency, jitter, and packet loss on each interface. The 'Best Quality' strategy then selects the interface with the best composite score, which can be weighted toward latency. In a real-world scenario, if the primary WAN link experiences a latency spike due to congestion, the FortiGate automatically fails over voice traffic to the secondary link without manual intervention, maintaining call quality.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
TExam Day Tips
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A practitioner preparing for the NSE4 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
What to study next
Got this wrong? Here's your next step.
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
- →
System and Network Administration — study guide chapter
Learn the concepts, then practise the questions
- →
System and Network Administration practice questions
Targeted practice on this topic area only
- →
All NSE4 questions
1,000 questions across all exam domains
- →
Fortinet NSE 4 Network Security Professional NSE4 study guide
Full concept coverage aligned to exam objectives
- →
NSE4 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related NSE4 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
System and Network Administration practice questions
Practise NSE4 questions linked to System and Network Administration.
Firewall Policies and NAT practice questions
Practise NSE4 questions linked to Firewall Policies and NAT.
Authentication and VPN practice questions
Practise NSE4 questions linked to Authentication and VPN.
Security Profiles practice questions
Practise NSE4 questions linked to Security Profiles.
High Availability and Diagnostics practice questions
Practise NSE4 questions linked to High Availability and Diagnostics.
NSE4 fundamentals practice questions
Practise NSE4 questions linked to NSE4 fundamentals.
NSE4 scenario practice questions
Practise NSE4 questions linked to NSE4 scenario.
NSE4 troubleshooting practice questions
Practise NSE4 questions linked to NSE4 troubleshooting.
Practice this exam
Start a free NSE4 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this NSE4 question test?
System and Network Administration — This question tests System and Network Administration — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: Configure an SD-WAN rule with a performance SLA that monitors latency and set strategy to 'Best Quality' — Option C is correct because SD-WAN rules with a performance SLA allow the FortiGate to monitor real-time latency on each WAN interface and dynamically route voice traffic to the interface with the lowest latency. The 'Best Quality' strategy selects the best-performing interface based on the SLA metrics, ensuring optimal voice quality.
What should I do if I get this NSE4 question wrong?
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 24, 2026
This NSE4 practice question is part of Courseiva's free Fortinet certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the NSE4 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.