Courseiva
Question 78 of 144
server-hardware-installation-managementeasyMultiple ChoiceObjective-mapped

SK0-005 server-hardware-installation-management Practice Question

A technician is installing a new 2U server into a datacenter rack. The server is equipped with redundant power supplies. According to best practices for power redundancy, how should the technician connect the power supplies?

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

Connect each PSU to a separate circuit

Option B is correct because connecting each power supply to a separate circuit (or separate PDUs fed by different circuits) ensures that if one circuit fails, the other keeps the server powered. Option A is wrong because connecting both to the same PDU creates a single point of failure. Option C is wrong because while a UPS is important, connecting only one PSU to a UPS defeats redundancy if the non-UPS circuit fails. Option D is wrong because operating voltages are standardized and must match the server specifications.

Answer analysis

Option-by-option breakdown

For each option: why learners choose it and why it is or isn't the right answer here.

  • Connect one PSU to a UPS and the other directly to mains

    Why it's wrong here

    This defeats redundancy because a failure of the mains circuit would still shut down the server if the other PSU fails.

  • Run one PSU at 110V and the other at 220V for load balancing

    Why it's wrong here

    Power supplies are designed to operate at a specific voltage range; mixing voltages can damage equipment and is not a practice for redundancy.

  • Connect each PSU to a separate circuit

    Why this is correct

    Best practice is to connect redundant PSUs to independent power sources (separate PDUs on different circuit breakers) to eliminate single points of failure.

  • Connect both PSUs to the same power distribution unit (PDU)

    Why it's wrong here

    Both PSUs on the same PDU create a single point of failure; if the PDU or its circuit fails, the server loses all power.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Last reviewed: Jul 26, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This SK0-005 practice question is part of Courseiva's free CompTIA certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the SK0-005 exam.