SK0-005 server-hardware-installation-management Practice Question
A technician installs additional RAM in a server. After powering on, the server emits a continuous beep code and does not POST. The server documentation indicates this beep code signifies a memory error. Which of the following is the MOST likely cause?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
The new RAM is not fully seated in the memory slot.
Memory errors after installation commonly result from improper seating. A beep code indicating memory detection failure points to a physical connection issue.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
The total RAM exceeds the server's maximum supported capacity.
Why it's wrong here
Exceeding capacity usually results in only part of the RAM being recognized, not a failure to POST with a beep code.
- ✓
The new RAM is not fully seated in the memory slot.
Why this is correct
A loose connection is the most frequent cause of memory errors after installation. Reseating the module usually resolves the issue immediately.
- ✗
The new RAM is ECC and the existing RAM is non-ECC.
Why it's wrong here
While mixing ECC and non-ECC can cause POST failures, it would more likely result in a different error or no POST with different beep pattern, not necessarily a continuous beep. Improper seating is far more common.
- ✗
The server BIOS needs to be updated to support the new RAM type.
Why it's wrong here
A BIOS update is rarely required for basic RAM compatibility and would not typically cause an immediate beep code—it would more likely manifest as a configuration error message.
Go deeper
Related to this question
Learn chapter
Physical and Logical Security Controls
Key term
Detection
Detection is the process of identifying potential security incidents or anomalies by analyzing system data, logs, and network traffic.
Key term
POST
Power-On Self-Test (POST) is a diagnostic process that a computer runs when it first powers on to check that essential hardware components are working correctly before loading the operating system.
About these practice questions
This SK0-005 question is part of Courseiva's 185-question bank — original exam-style content with full explanations and wrong-answer analysis, never real exam questions or exam dumps. Learn why practice questions differ from exam dumps →
JA
Written and reviewed by Johnson Ajibi, MSc IT Security
Senior Network & Security Engineer · founder of Courseiva
Last reviewed July 2026 · checked against the official CompTIA exam blueprint
This SK0-005 practice question is part of Courseiva's free CompTIA certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the SK0-005 exam.