Question 157 of 144
SK0-005 troubleshooting Practice Question
A server configured with a RAID 5 array and a hot spare experiences intermittent crashes under heavy disk I/O. A technician suspects a failing drive. Which of the following should the technician do FIRST?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Run the array manufacturer's diagnostic utility.
Running the manufacturer's diagnostic utility (Option B) is correct because it provides a non-invasive method to verify the health of the drives without disrupting the array. Replacing the hot spare (Option A) is premature without confirmation. Removing a suspected drive (Option C) risks data loss if the array is already degraded. Initiating a manual failover (Option D) is unnecessary if the drive has not actually failed.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
Initiate a manual failover to the hot spare.
Why it's wrong here
Manual failover is not necessary if the drive is not confirmed failed; it may cause unnecessary rebuild and performance impact.
- ✗
Remove the suspected drive and rebuild the array.
Why it's wrong here
Removing a drive without verification could cause data loss if the array is degraded or the wrong drive is removed.
- ✗
Replace the hot spare with a new drive.
Why it's wrong here
The hot spare has not been confirmed as failed; replacing it without testing does not address the root cause.
- ✓
Run the array manufacturer's diagnostic utility.
Why this is correct
This is the first step to confirm a drive failure and identify which drive is problematic.
Quick reference
RAID Level Comparison
| RAID Level | Min Disks | Fault Tolerance | Read | Write | Usable Capacity |
|---|---|---|---|---|---|
| RAID 0 | 2 | None | Excellent | Excellent | 100% |
| RAID 1 | 2 | 1 disk | Good | Moderate | 50% |
| RAID 5 | 3 | 1 disk | Good | Moderate | 67–94% |
| RAID 6 | 4 | 2 disks | Good | Lower | 50–88% |
| RAID 10 | 4 | 1 disk per mirror | Excellent | Good | 50% |
RAID is not a backup strategy — it protects against disk failure but not against accidental deletion, ransomware, or site-level events.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jul 26, 2026
This SK0-005 practice question is part of Courseiva's free CompTIA certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the SK0-005 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.