CKAD Application Observability and Maintenance Practice Question
This CKAD practice question tests your understanding of application observability and maintenance. The scenario asks you to isolate a root cause — eliminate options that address a different problem before choosing. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
You have a Deployment with 3 replicas. The pods have a readiness probe that checks an HTTP endpoint /ready. One pod's readiness probe is failing. What will happen?
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
The pod will be removed from the Service endpoints
If a pod fails its readiness probe, it is removed from the Service endpoints. The pod remains running and is not restarted. Option B is correct. Option A is wrong because liveness probes cause restarts. Option C is incorrect because readiness failure does not decrease replicas. Option D is wrong.
Key principle: NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
✗
The pod will be restarted by the kubelet
Why it's wrong here
Readiness probe failure does not restart the pod; liveness probe failure does.
✗
The Deployment will create a new pod to maintain 3 replicas
Why it's wrong here
The pod is still running, so the ReplicaSet count remains 3.
✓
The pod will be removed from the Service endpoints
Why this is correct
The pod is not ready to serve traffic, so it is removed from the Service.
Related concept
Static NAT maps one inside address to one outside address.
✗
The pod will be terminated gracefully
Why it's wrong here
No termination occurs due to readiness probe failure.
Common exam traps
Common exam trap: NAT rules depend on direction and matching traffic
NAT is not only about the public address. The inside/outside interface roles and the ACL or rule that matches traffic are just as important.
Detailed technical explanation
How to think about this question
NAT questions usually test address translation, overload/PAT behaviour, static mappings and whether the right traffic is being translated. Read the interface direction and address terms carefully.
KKey Concepts to Remember
Static NAT maps one inside address to one outside address.
PAT allows many inside hosts to share one public address using ports.
Inside local and inside global describe the private and translated addresses.
NAT ACLs identify traffic for translation, not always security filtering.
TExam Day Tips
→Identify inside and outside interfaces first.
→Check whether the scenario needs static NAT, dynamic NAT or PAT.
→Do not confuse NAT matching ACLs with normal packet-filtering intent.
Key takeaway
NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.
Real-world example
How this comes up in practice
A small business has 20 workstations on the 192.168.1.0/24 network and one public IP from its ISP. The router uses PAT (NAT overload) so all 20 devices share one public address using different source ports. NAT questions test whether you understand the four address terms and which direction each translation applies.
Related glossary terms
Concepts from this question explained
These glossary pages explain the core terms tested in this CKAD question in full detail.
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related CKAD NAT questions on configuration and troubleshooting.
Application Observability and Maintenance — This question tests Application Observability and Maintenance — Static NAT maps one inside address to one outside address..
What is the correct answer to this question?
The correct answer is: The pod will be removed from the Service endpoints — If a pod fails its readiness probe, it is removed from the Service endpoints. The pod remains running and is not restarted. Option B is correct. Option A is wrong because liveness probes cause restarts. Option C is incorrect because readiness failure does not decrease replicas. Option D is wrong.
What should I do if I get this CKAD question wrong?
Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related CKAD NAT questions on configuration and troubleshooting.
What is the key concept behind this question?
Static NAT maps one inside address to one outside address.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
This CKAD practice question is part of Courseiva's free CNCF certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the CKAD exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.