- A
The command 'logging host 192.168.1.100' configures the device to send syslog messages to the server at that IP address.
Correct because 'logging host' specifies the destination syslog server IP address.
- B
The command 'logging trap 4' configures the device to send syslog messages with severity 4 (warnings) and higher (0-4) to the syslog server.
Correct because the trap level includes the specified severity and all higher (lower number) severities; level 4 includes levels 0-4.
- C
The command 'logging source-interface Loopback0' ensures that syslog messages use the Loopback0 IP address as the source.
Correct because 'logging source-interface' sets the source IP for syslog packets, which is useful for reachability and filtering.
- D
The default logging trap level on Cisco IOS is level 7 (debugging).
Why wrong: Incorrect because the default logging trap level is level 6 (informational), not level 7.
- E
The command 'logging console 3' limits syslog messages displayed on the console to severity 3 (errors) and lower (0-3).
Why wrong: Incorrect because 'logging console' affects console output, not the syslog server; also, it includes the specified level and higher (lower number) severities, so level 3 includes levels 0-3.
Quick Answer
The correct answer is that the command 'logging source-interface Loopback0' ensures syslog messages use the Loopback0 IP address as the source. This is because the logging source-interface directive overrides the default egress interface IP, forcing all syslog packets to originate from a stable, logical interface like a loopback, which is critical for consistent server-side filtering and troubleshooting. On the ENCOR 350-401 exam, syslog configuration tests your understanding of how logging trap levels (default informational, level 6) and logging host work together, with a common trap being confusion between logging buffered (local RAM storage) and logging console (console output only). The exam often presents a scenario where you must select three true statements from a mix of these commands. A reliable memory tip: think of "source-interface" as the return address on an envelope—always use a loopback so the syslog server knows exactly where to reply, even if the physical path changes.
350-401 SNMP and Syslog Practice Question
This 350-401 practice question tests your understanding of snmp and syslog. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Which three statements about syslog configuration on Cisco IOS devices are true? (Choose three.)
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
The command 'logging host 192.168.1.100' configures the device to send syslog messages to the server at that IP address.
The logging host command specifies the syslog server IP. The logging trap level sets the severity for messages sent to the syslog server; default is level 6 (informational). The logging source-interface sets the source IP of syslog packets. The logging buffered command stores messages in RAM. The logging console command affects messages sent to the console port, not to the syslog server.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
The command 'logging host 192.168.1.100' configures the device to send syslog messages to the server at that IP address.
Why this is correct
Correct because 'logging host' specifies the destination syslog server IP address.
Related concept
Read the scenario before looking for a memorised answer.
- ✓
The command 'logging trap 4' configures the device to send syslog messages with severity 4 (warnings) and higher (0-4) to the syslog server.
Why this is correct
Correct because the trap level includes the specified severity and all higher (lower number) severities; level 4 includes levels 0-4.
Related concept
Read the scenario before looking for a memorised answer.
- ✓
The command 'logging source-interface Loopback0' ensures that syslog messages use the Loopback0 IP address as the source.
Why this is correct
Correct because 'logging source-interface' sets the source IP for syslog packets, which is useful for reachability and filtering.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
The default logging trap level on Cisco IOS is level 7 (debugging).
Why it's wrong here
Incorrect because the default logging trap level is level 6 (informational), not level 7.
- ✗
The command 'logging console 3' limits syslog messages displayed on the console to severity 3 (errors) and lower (0-3).
Why it's wrong here
Incorrect because 'logging console' affects console output, not the syslog server; also, it includes the specified level and higher (lower number) severities, so level 3 includes levels 0-3.
Common exam traps
Common exam trap: answer the scenario, not the keyword
Many certification questions include familiar terms but test a specific constraint. Read the exact wording before choosing an answer that is generally true but wrong for this case.
Trap categories for this question
Command / output trap
Incorrect because 'logging console' affects console output, not the syslog server; also, it includes the specified level and higher (lower number) severities, so level 3 includes levels 0-3.
Detailed technical explanation
How to think about this question
This question should be treated as a scenario, not a definition check. Identify the problem, the constraint and the best action. Then compare each option against those facts.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
- Use explanations to understand the rule behind the answer.
TExam Day Tips
- Underline the problem statement mentally.
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A practitioner preparing for the 350-401 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
What to study next
Got this wrong? Here's your next step.
Identify which 350-401 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
- →
SNMP and Syslog — study guide chapter
Learn the concepts, then practise the questions
- →
SNMP and Syslog practice questions
Targeted practice on this topic area only
- →
All 350-401 questions
2,015 questions across all exam domains
- →
ENCOR 350-401 study guide
Full concept coverage aligned to exam objectives
- →
350-401 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 350-401 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Architecture practice questions
Practise 350-401 questions linked to Architecture.
Enterprise Network Design practice questions
Practise 350-401 questions linked to Enterprise Network Design.
SD-Access Architecture practice questions
Practise 350-401 questions linked to SD-Access Architecture.
SD-WAN Architecture practice questions
Practise 350-401 questions linked to SD-WAN Architecture.
QoS Architecture practice questions
Practise 350-401 questions linked to QoS Architecture.
Virtualization practice questions
Practise 350-401 questions linked to Virtualization.
Network Function Virtualization practice questions
Practise 350-401 questions linked to Network Function Virtualization.
Virtual Machines and Hypervisors practice questions
Practise 350-401 questions linked to Virtual Machines and Hypervisors.
VRF and Path Isolation practice questions
Practise 350-401 questions linked to VRF and Path Isolation.
Infrastructure practice questions
Practise 350-401 questions linked to Infrastructure.
OSPF practice questions
Practise 350-401 questions linked to OSPF.
BGP practice questions
Practise 350-401 questions linked to BGP.
Practice this exam
Start a free 350-401 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 350-401 question test?
SNMP and Syslog — This question tests SNMP and Syslog — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: The command 'logging host 192.168.1.100' configures the device to send syslog messages to the server at that IP address. — The logging host command specifies the syslog server IP. The logging trap level sets the severity for messages sent to the syslog server; default is level 6 (informational). The logging source-interface sets the source IP of syslog packets. The logging buffered command stores messages in RAM. The logging console command affects messages sent to the console port, not to the syslog server.
What should I do if I get this 350-401 question wrong?
Identify which 350-401 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 18, 2026
This 350-401 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-401 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.