Question 1,753 of 2,015

SNMP and Syslog →hardDrag & DropObjective-mapped

Quick Answer

The correct order begins with enabling the SNMP agent using the `snmp-server` command, followed by defining the SNMPv3 group with a security model, then creating the user with authentication and privacy passwords, and finally restricting access via an `snmp-server community` ACL. This sequence is essential because SNMPv3’s security model requires the agent to be active before groups and users can be bound to specific security levels, and the ACL acts as the last line of defense to limit which NMS stations can poll the agent. On the ENCOR 350-401 exam, this drag-and-drop task tests your understanding of the logical dependency chain in Cisco IOS configuration—a common trap is placing the ACL step before user creation, which would fail because the user must exist before access rules can be applied. Remember the mnemonic “Agent, Group, User, Lock” to keep the steps in order.

350-401 SNMP and Syslog Practice Question

This 350-401 practice question tests your understanding of snmp and syslog. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

Drag and drop the steps of SNMPv3 secure agent configuration into the correct order, from first to last.

Clue words in this question

Noticing these words before you look at the options changes how you read each choice.

Clue: "first"
Why it matters: Order matters here. You are being tested on which action comes before the others — not which action is generally useful.

Question 1harddrag order

Read the full network assurance explanation →

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

✓

Enable SNMP agent with snmp-server command

First, you must enable the SNMP agent with snmp-server. Then define the SNMPv3 group and associate it with a security model. Next, create the user and assign authentication and privacy passwords. Finally, restrict access using an ACL to limit which NMS can poll the agent.

Key principle: ACLs process entries top to bottom and stop at the first match. Entry order and interface direction matter as much as the permit or deny statement.

Common exam traps

Common exam trap: ACLs stop at the first match

ACLs are processed top to bottom. The first matching entry wins, and an implicit deny usually exists at the end.

Detailed technical explanation

How to think about this question

ACL questions test precision: source, destination, protocol, port and direction. A generally correct ACL can still fail if it is applied on the wrong interface or in the wrong direction.

KKey Concepts to Remember

Standard ACLs match source addresses.
Extended ACLs can match source, destination, protocol and ports.
The first matching ACL entry is used.
There is usually an implicit deny at the end.

TExam Day Tips

Check inbound versus outbound direction.
Read the ACL from top to bottom.
Look for a broader permit or deny above the intended line.

Key takeaway

ACLs process entries top to bottom and stop at the first match. Entry order and interface direction matter as much as the permit or deny statement.

Real-world example

How this comes up in practice

A security administrator must allow nursing staff to reach a patient records server while blocking access from the guest Wi-Fi VLAN. After applying an extended ACL, traffic is still blocked from nursing workstations. The ACL was applied outbound instead of inbound on the wrong interface. Questions like this test ACL direction and placement rules.

What to study next

Got this wrong? Here's your next step.

Review ACL processing order, placement rules (standard near destination, extended near source), and inbound vs outbound direction. Study wildcard masks and implicit deny. Then practise related 350-401 ACL questions on filtering logic and placement.

Related 350-401 practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Architecture practice questions

Practise 350-401 questions linked to Architecture.

Enterprise Network Design practice questions

Practise 350-401 questions linked to Enterprise Network Design.

SD-Access Architecture practice questions

Practise 350-401 questions linked to SD-Access Architecture.

SD-WAN Architecture practice questions

Practise 350-401 questions linked to SD-WAN Architecture.

QoS Architecture practice questions

Practise 350-401 questions linked to QoS Architecture.

Virtualization practice questions

Practise 350-401 questions linked to Virtualization.

Network Function Virtualization practice questions

Practise 350-401 questions linked to Network Function Virtualization.

Virtual Machines and Hypervisors practice questions

Practise 350-401 questions linked to Virtual Machines and Hypervisors.

VRF and Path Isolation practice questions

Practise 350-401 questions linked to VRF and Path Isolation.

Infrastructure practice questions

Practise 350-401 questions linked to Infrastructure.

OSPF practice questions

Practise 350-401 questions linked to OSPF.

BGP practice questions

Practise 350-401 questions linked to BGP.

Practice this exam

Start a free 350-401 practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

10 questions 20 questions 30 questions 50 questions Timed 30

350-401 practice-test guide →Study guide →Browse all practice tests

FAQ

Questions learners often ask

What does this 350-401 question test?

SNMP and Syslog — This question tests SNMP and Syslog — Standard ACLs match source addresses..

What is the correct answer to this question?

The correct answer is: Enable SNMP agent with snmp-server command — First, you must enable the SNMP agent with snmp-server. Then define the SNMPv3 group and associate it with a security model. Next, create the user and assign authentication and privacy passwords. Finally, restrict access using an ACL to limit which NMS can poll the agent.

What should I do if I get this 350-401 question wrong?

Are there clue words in this question I should notice?

Yes — watch for: "first". Order matters here. You are being tested on which action comes before the others — not which action is generally useful.

What is the key concept behind this question?

Standard ACLs match source addresses.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Last reviewed: Jun 18, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

This 350-401 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-401 exam.