- A
Wireless clients are assigned to the same virtual network (VN) as wired clients for consistent policy.
Correct because SD-Access unifies wired and wireless policy by placing both types of endpoints into the same VN.
- B
The wireless LAN controller in SD-Access must be a dedicated fabric role separate from the fabric edge.
Why wrong: Incorrect because the WLC can be integrated as a fabric edge or border node; there is no separate dedicated role.
- C
CAPWAP tunnels are used between the access point and the fabric edge for data traffic.
Why wrong: Incorrect because CAPWAP is used only between the AP and the WLC in the underlay; the fabric edge uses VXLAN for data traffic.
- D
The fabric uses a separate wireless overlay network for wireless traffic.
Why wrong: Incorrect because SD-Access uses a single VXLAN-based fabric overlay for both wired and wireless traffic.
- E
The access point encapsulates wireless traffic directly into VXLAN when the WLC is fabric-enabled.
Correct because when the WLC is fabric-enabled, the AP can encapsulate wireless client traffic directly into VXLAN, reducing overhead.
Quick Answer
The correct answer is that the access point does not encapsulate wireless traffic directly into VXLAN; instead, the fabric-enabled wireless controller (WLC) handles VXLAN encapsulation to the fabric edge. This is because in Cisco SD-Access wireless integration, the CAPWAP tunnel between the AP and WLC operates only in the underlay, while the fabric data plane uses VXLAN to map wireless clients to the same virtual network as wired clients, ensuring consistent policy enforcement. On the ENCOR 350-401 exam, this question tests your understanding of how the SD-Access fabric unifies wired and wireless traffic without a separate overlay, often trapping candidates who assume the AP performs VXLAN encapsulation directly. A common memory tip is: “AP talks CAPWAP, WLC talks VXLAN”—the WLC acts as the fabric edge or border, not the AP, so the VXLAN tunnel originates from the WLC, not the access point.
350-401 SD-Access Architecture Practice Question
This 350-401 practice question tests your understanding of sd-access architecture. Match the stated requirement to the specific cloud service, access model, or configuration option — many options are valid in isolation but not for this scenario. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Which two statements about Cisco SD-Access fabric wireless integration are true? (Choose two.)
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Wireless clients are assigned to the same virtual network (VN) as wired clients for consistent policy.
In SD-Access, wireless clients are mapped to the same virtual network (VN) as wired clients, enabling consistent policy. The wireless controller (WLC) can be deployed as a fabric edge or border, not as a separate dedicated role. The CAPWAP tunnel is only used between the AP and the WLC in the underlay; once the WLC is fabric-enabled, it uses VXLAN to the fabric edge. The fabric does not require a separate wireless overlay; it uses the same VXLAN data plane. The AP does not encapsulate traffic directly into VXLAN; that is done by the fabric edge or the WLC.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
Wireless clients are assigned to the same virtual network (VN) as wired clients for consistent policy.
Why this is correct
Correct because SD-Access unifies wired and wireless policy by placing both types of endpoints into the same VN.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
The wireless LAN controller in SD-Access must be a dedicated fabric role separate from the fabric edge.
Why it's wrong here
Incorrect because the WLC can be integrated as a fabric edge or border node; there is no separate dedicated role.
- ✗
CAPWAP tunnels are used between the access point and the fabric edge for data traffic.
Why it's wrong here
Incorrect because CAPWAP is used only between the AP and the WLC in the underlay; the fabric edge uses VXLAN for data traffic.
- ✗
The fabric uses a separate wireless overlay network for wireless traffic.
Why it's wrong here
Incorrect because SD-Access uses a single VXLAN-based fabric overlay for both wired and wireless traffic.
- ✓
The access point encapsulates wireless traffic directly into VXLAN when the WLC is fabric-enabled.
Why this is correct
Correct because when the WLC is fabric-enabled, the AP can encapsulate wireless client traffic directly into VXLAN, reducing overhead.
Related concept
Read the scenario before looking for a memorised answer.
Common exam traps
Common exam trap: answer the scenario, not the keyword
Many certification questions include familiar terms but test a specific constraint. Read the exact wording before choosing an answer that is generally true but wrong for this case.
Detailed technical explanation
How to think about this question
This question should be treated as a scenario, not a definition check. Identify the problem, the constraint and the best action. Then compare each option against those facts.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
- Use explanations to understand the rule behind the answer.
TExam Day Tips
- Underline the problem statement mentally.
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A practitioner preparing for the 350-401 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
What to study next
Got this wrong? Here's your next step.
Identify which 350-401 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
- →
SD-Access Architecture — study guide chapter
Learn the concepts, then practise the questions
- →
SD-Access Architecture practice questions
Targeted practice on this topic area only
- →
All 350-401 questions
2,015 questions across all exam domains
- →
ENCOR 350-401 study guide
Full concept coverage aligned to exam objectives
- →
350-401 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 350-401 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Architecture practice questions
Practise 350-401 questions linked to Architecture.
Enterprise Network Design practice questions
Practise 350-401 questions linked to Enterprise Network Design.
SD-Access Architecture practice questions
Practise 350-401 questions linked to SD-Access Architecture.
SD-WAN Architecture practice questions
Practise 350-401 questions linked to SD-WAN Architecture.
QoS Architecture practice questions
Practise 350-401 questions linked to QoS Architecture.
Virtualization practice questions
Practise 350-401 questions linked to Virtualization.
Network Function Virtualization practice questions
Practise 350-401 questions linked to Network Function Virtualization.
Virtual Machines and Hypervisors practice questions
Practise 350-401 questions linked to Virtual Machines and Hypervisors.
VRF and Path Isolation practice questions
Practise 350-401 questions linked to VRF and Path Isolation.
Infrastructure practice questions
Practise 350-401 questions linked to Infrastructure.
OSPF practice questions
Practise 350-401 questions linked to OSPF.
BGP practice questions
Practise 350-401 questions linked to BGP.
Practice this exam
Start a free 350-401 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 350-401 question test?
SD-Access Architecture — This question tests SD-Access Architecture — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: Wireless clients are assigned to the same virtual network (VN) as wired clients for consistent policy. — In SD-Access, wireless clients are mapped to the same virtual network (VN) as wired clients, enabling consistent policy. The wireless controller (WLC) can be deployed as a fabric edge or border, not as a separate dedicated role. The CAPWAP tunnel is only used between the AP and the WLC in the underlay; once the WLC is fabric-enabled, it uses VXLAN to the fabric edge. The fabric does not require a separate wireless overlay; it uses the same VXLAN data plane. The AP does not encapsulate traffic directly into VXLAN; that is done by the fabric edge or the WLC.
What should I do if I get this 350-401 question wrong?
Identify which 350-401 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More 350-401 practice questions
- Drag and drop the steps to configure an extended access control list (ACL) on a Cisco router in the correct order.
- Drag and drop the steps to configure a site-to-site IPsec VPN on a Cisco router in the correct order.
- Drag and drop the steps to configure VLAN Trunking Protocol (VTP) on a Cisco switch in the correct order.
- Drag and drop the steps to configure a static route on a Cisco IOS router into the correct order.
- Drag and drop the steps to configure port security on a Cisco switch in the correct order.
- Drag and drop the steps for the Spanning Tree Protocol (STP) convergence process in the correct order.
Last reviewed: Jun 18, 2026
This 350-401 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-401 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.