Question 762 of 2,015

Model-Driven Telemetry →mediumDrag & DropObjective-mapped

Quick Answer

The correct answer is to apply the sensor path for interface statistics last, as the final step in the Cisco IOS-XE telemetry CLI configuration order. This sequence follows the mandatory syntax hierarchy: you must first enter telemetry mode, then define the subscription, set the receiver details, specify the streaming protocol, and only after those foundational elements are established can you attach the sensor path to collect interface statistics. On the ENCOR 350-401 exam, this drag-and-drop task tests your understanding of model-driven telemetry (MDT) configuration flow, a key automation topic. A common trap is placing the sensor path before defining the receiver or stream, which would cause the configuration to be rejected because the subscription lacks a destination. To remember the order, use the mnemonic “Every Subscriber Really Streams Paths” — Enter telemetry mode, define Subscription, set Receiver, specify Stream, then apply the Path last.

350-401 Model-Driven Telemetry Practice Question

This 350-401 practice question tests your understanding of model-driven telemetry. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

Drag and drop the steps of Cisco IOS-XE mdt subscription via CLI configuration into the correct order, from first to last.

Clue words in this question

Noticing these words before you look at the options changes how you read each choice.

Clue: "first"
Why it matters: Order matters here. You are being tested on which action comes before the others — not which action is generally useful.

Question 1mediumdrag order

Full question →

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

✓

Enter telemetry configuration mode

The CLI configuration order follows Cisco IOS-XE syntax: enter telemetry mode, define subscription, set receiver, specify stream, and apply sensor path.

Key principle: Authentication proves identity; authorization controls what that identity can do after login. Both must work for full privileged access.

Common exam traps

Common exam trap: authentication is not authorization

Logging in proves the user can authenticate. It does not automatically mean the user is allowed to enter privileged or configuration mode. Watch for AAA authorization, privilege level and command authorization details.

Detailed technical explanation

How to think about this question

This kind of question is testing the difference between identity and permission. A user may successfully log in to a router because authentication is working, but still fail to enter configuration mode because authorization is missing, misconfigured or mapped to a lower privilege level.

KKey Concepts to Remember

Authentication checks who the user is.
Authorization controls what the user is allowed to do after login.
Privilege levels affect access to EXEC and configuration commands.
AAA, TACACS+ and RADIUS can separate login success from command access.

TExam Day Tips

Do not assume successful login means full administrative access.
Look for words such as cannot enter configuration mode, privilege level, authorization or command access.
Separate login problems from permission problems before choosing the answer.

Key takeaway

Authentication proves identity; authorization controls what that identity can do after login. Both must work for full privileged access.

Real-world example

How this comes up in practice

A small business has 20 workstations on the 192.168.1.0/24 network and one public IP from its ISP. The router uses PAT (NAT overload) so all 20 devices share one public address using different source ports. NAT questions test whether you understand the four address terms and which direction each translation applies.

What to study next

Got this wrong? Here's your next step.

Review Cisco AAA concepts — authentication, authorization, and accounting. Study privilege levels (0–15), command authorization under TACACS+, and how RADIUS differs. Then practise related 350-401 questions on access control and AAA configuration.

Related 350-401 practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Architecture practice questions

Practise 350-401 questions linked to Architecture.

Enterprise Network Design practice questions

Practise 350-401 questions linked to Enterprise Network Design.

SD-Access Architecture practice questions

Practise 350-401 questions linked to SD-Access Architecture.

SD-WAN Architecture practice questions

Practise 350-401 questions linked to SD-WAN Architecture.

QoS Architecture practice questions

Practise 350-401 questions linked to QoS Architecture.

Virtualization practice questions

Practise 350-401 questions linked to Virtualization.

Network Function Virtualization practice questions

Practise 350-401 questions linked to Network Function Virtualization.

Virtual Machines and Hypervisors practice questions

Practise 350-401 questions linked to Virtual Machines and Hypervisors.

VRF and Path Isolation practice questions

Practise 350-401 questions linked to VRF and Path Isolation.

Infrastructure practice questions

Practise 350-401 questions linked to Infrastructure.

OSPF practice questions

Practise 350-401 questions linked to OSPF.

BGP practice questions

Practise 350-401 questions linked to BGP.

Practice this exam

Start a free 350-401 practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

10 questions 20 questions 30 questions 50 questions Timed 30

350-401 practice-test guide →Study guide →Browse all practice tests

FAQ

Questions learners often ask

What does this 350-401 question test?

Model-Driven Telemetry — This question tests Model-Driven Telemetry — Authentication checks who the user is..

What is the correct answer to this question?

The correct answer is: Enter telemetry configuration mode — The CLI configuration order follows Cisco IOS-XE syntax: enter telemetry mode, define subscription, set receiver, specify stream, and apply sensor path.

What should I do if I get this 350-401 question wrong?

Are there clue words in this question I should notice?

Yes — watch for: "first". Order matters here. You are being tested on which action comes before the others — not which action is generally useful.

What is the key concept behind this question?

Authentication checks who the user is.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Same concept, more angles

1 more ways this is tested on 350-401

These questions test the same concept from different angles. Work through them to make sure you can recognise it however the exam phrases it.

Variation 1. Drag and drop the steps of Cisco IOS-XE mdt subscription via CLI configuration into the correct order, from first to last.

medium

✓ A.Enter global configuration mode on IOS-XE
✓ B.Configure receiver IP and port using telemetry ietf subscription
✓ C.Specify YANG paths and update policy (periodic/on-change)
✓ D.Apply subscription with commit or end
✓ E.Verify with show telemetry ietf subscription

Why A: The CLI configuration begins by entering global config, defining the receiver, setting the subscription parameters, applying the subscription, and verifying it.

Keep practising

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

This 350-401 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-401 exam.