Drag steps to the numbered slots on the right, or tap a step then tap a slot.
Steps
Order
1Step 1
2Step 2
3Step 3
4Step 4
5Step 5
Question 1,344 of 1,840
mediumDrag & DropObjective-mapped
350-401 Practice Question: Drag and drop the steps of EIGRP named mode…
Drag and drop the steps of EIGRP named mode configuration steps into the correct order, from first to last.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Enter global config and type router eigrp <name>
Named mode starts with the router eigrp <virtual-name> command, then enters address-family configuration, configures the network, and optionally adjusts timers or other parameters. Finally, the configuration is verified.
Quick reference
Routing Protocol Comparison
| Protocol | Metric | Max Hops | Algorithm | Type |
|---|---|---|---|---|
| RIP v2 | Hop count | 15 | Bellman-Ford | Distance vector |
| OSPF | Cost (bandwidth) | Unlimited | Dijkstra (SPF) | Link state |
| EIGRP | Composite metric | Unlimited | DUAL | Hybrid |
| IS-IS | Cost | Unlimited | Dijkstra | Link state |
| BGP | Policy / attributes | Unlimited | Path vector | Path vector |
RIP's 15-hop limit makes it unsuitable for large networks. OSPF and EIGRP dominate modern enterprise deployments.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Same concept, more angles
1 more way this is tested on 350-401
These questions test the same concept from different angles. Work through them to make sure you can recognise it however the exam phrases it.
Variation 1. Drag and drop the steps of EIGRP named mode configuration steps into the correct order, from first to last.
medium- ✓ A.Create the EIGRP named mode instance
- ✓ B.Enter address-family ipv4 unicast
- ✓ C.Advertise networks using network statements
- ✓ D.Configure hello and hold timers if needed
- ✓ E.Verify with show ip eigrp interfaces detail
Why A: EIGRP named mode uses an address-family configuration. First, create the named EIGRP instance, then enter address-family IPv4, configure the network, optionally adjust timers, and finally verify the configuration.
Last reviewed: Jun 18, 2026
This 350-401 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-401 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.