- A
Configure 'logging host 192.168.1.100' and 'logging trap errors'.
Correct. 'logging host 192.168.1.100' specifies the syslog server, and 'logging trap errors' sets the global trap severity to errors (level 3), so messages of severity 3 and higher are sent.
- B
Configure 'logging console debugging' to ensure all messages are seen on console.
Why wrong: Incorrect. This would set console logging to debugging (level 7), which is not what is required. The requirement is to limit console to severity 5 and above, so 'logging console notifications' should be used.
- C
Configure 'logging console notifications'.
Correct. 'logging console notifications' sets console logging to severity 5 (notifications) and above, matching the requirement.
- D
Configure 'logging buffered errors' to store logs locally.
Why wrong: Incorrect. This configures buffer logging, which is not required by the scenario. The scenario only specifies syslog and console logging.
- E
Configure 'logging source-interface Loopback0' to use a specific source IP.
Why wrong: Incorrect. While this is a common practice for syslog, it does not affect the severity levels, which is the focus of the question.
Quick Answer
The correct answer is to configure both the syslog server destination and the console severity level, specifically using the commands 'logging host 192.168.1.100 3' and 'logging console notifications'. This works because the 'logging host' command directly sets the severity threshold for messages sent to that particular syslog server, overriding any global trap level, while 'logging console notifications' limits console output to severity 5 (notifications) and above, filtering out lower-severity debug messages. On the Cisco CCNP ENARSI 300-410 exam, this tests your understanding of how severity levels interact with different logging destinations—a common trap is confusing 'logging trap' with the per-host severity set on the 'logging host' command, or assuming 'logging buffered' affects console output. Remember the memory tip: "Host gets its own level, console gets its own command"—each destination is independently configured, so always specify the severity directly on the syslog server line and use 'logging console' for terminal visibility.
300-410 Device Management Practice Question
This 300-410 practice question tests your understanding of device management. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
An engineer must configure a Cisco IOS router to log messages to a syslog server at 192.168.1.100 with a severity level of 3 (errors) and above, while also ensuring that console messages are limited to severity 5 (notifications) and above. Which TWO configuration changes are required? (Choose TWO.)
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
Configure 'logging host 192.168.1.100' and 'logging trap errors'.
The 'logging host' command specifies the syslog server and optionally the severity level. The 'logging console' command sets the console logging level. The 'logging trap' command sets the severity for syslog server messages, but when using 'logging host' with a level, it overrides the global trap level for that host. The 'logging buffered' command affects buffer logging, not console or syslog. The 'logging source-interface' sets the source IP but does not affect severity.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
Configure 'logging host 192.168.1.100' and 'logging trap errors'.
Why this is correct
Correct. 'logging host 192.168.1.100' specifies the syslog server, and 'logging trap errors' sets the global trap severity to errors (level 3), so messages of severity 3 and higher are sent.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
Configure 'logging console debugging' to ensure all messages are seen on console.
Why it's wrong here
Incorrect. This would set console logging to debugging (level 7), which is not what is required. The requirement is to limit console to severity 5 and above, so 'logging console notifications' should be used.
- ✓
Configure 'logging console notifications'.
Why this is correct
Correct. 'logging console notifications' sets console logging to severity 5 (notifications) and above, matching the requirement.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
Configure 'logging buffered errors' to store logs locally.
Why it's wrong here
Incorrect. This configures buffer logging, which is not required by the scenario. The scenario only specifies syslog and console logging.
- ✗
Configure 'logging source-interface Loopback0' to use a specific source IP.
Why it's wrong here
Incorrect. While this is a common practice for syslog, it does not affect the severity levels, which is the focus of the question.
Common exam traps
Common exam trap: answer the scenario, not the keyword
Many certification questions include familiar terms but test a specific constraint. Read the exact wording before choosing an answer that is generally true but wrong for this case.
Trap categories for this question
Scenario analysis trap
Incorrect. This configures buffer logging, which is not required by the scenario. The scenario only specifies syslog and console logging.
Detailed technical explanation
How to think about this question
This question should be treated as a scenario, not a definition check. Identify the problem, the constraint and the best action. Then compare each option against those facts.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
- Use explanations to understand the rule behind the answer.
TExam Day Tips
- Underline the problem statement mentally.
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A practitioner preparing for the 300-410 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
What to study next
Got this wrong? Here's your next step.
Identify which 300-410 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
- →
Device Management — study guide chapter
Learn the concepts, then practise the questions
- →
Device Management practice questions
Targeted practice on this topic area only
- →
All 300-410 questions
2,152 questions across all exam domains
- →
Cisco CCNP ENARSI 300-410 study guide
Full concept coverage aligned to exam objectives
- →
300-410 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 300-410 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Layer 3 Technologies practice questions
Practise 300-410 questions linked to Layer 3 Technologies.
EIGRP Troubleshooting practice questions
Practise 300-410 questions linked to EIGRP Troubleshooting.
OSPF Troubleshooting (v2/v3) practice questions
Practise 300-410 questions linked to OSPF Troubleshooting (v2/v3).
BGP Troubleshooting practice questions
Practise 300-410 questions linked to BGP Troubleshooting.
Route Redistribution practice questions
Practise 300-410 questions linked to Route Redistribution.
Policy-Based Routing (PBR) practice questions
Practise 300-410 questions linked to Policy-Based Routing (PBR).
VRF-Lite practice questions
Practise 300-410 questions linked to VRF-Lite.
Route Maps and Route Filtering practice questions
Practise 300-410 questions linked to Route Maps and Route Filtering.
Administrative Distance practice questions
Practise 300-410 questions linked to Administrative Distance.
Route Summarization practice questions
Practise 300-410 questions linked to Route Summarization.
Bidirectional Forwarding Detection (BFD) practice questions
Practise 300-410 questions linked to Bidirectional Forwarding Detection (BFD).
VPN Technologies practice questions
Practise 300-410 questions linked to VPN Technologies.
Practice this exam
Start a free 300-410 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 300-410 question test?
Device Management — This question tests Device Management — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: Configure 'logging host 192.168.1.100' and 'logging trap errors'. — The 'logging host' command specifies the syslog server and optionally the severity level. The 'logging console' command sets the console logging level. The 'logging trap' command sets the severity for syslog server messages, but when using 'logging host' with a level, it overrides the global trap level for that host. The 'logging buffered' command affects buffer logging, not console or syslog. The 'logging source-interface' sets the source IP but does not affect severity.
What should I do if I get this 300-410 question wrong?
Identify which 300-410 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 18, 2026
This 300-410 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 300-410 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.