Quick Answer
The answer is 60 seconds. This is the default frequency for an IP SLA operation when no explicit frequency is configured, meaning the probe is sent every 60 seconds by default. The IP SLA feature measures network performance by generating synthetic traffic, and the frequency parameter controls how often that probe is repeated; if omitted, the Cisco IOS automatically applies a 60-second interval to prevent unnecessary network overhead while still providing periodic data. On the Cisco CCNP ENARSI 300-410 exam, this tests your understanding of IP SLA baseline configuration, often appearing in troubleshooting scenarios where a candidate must recognize that a missing frequency command defaults to 60 seconds—a common trap is assuming a shorter interval like 10 or 30 seconds. Remember the memory tip: think of a clock’s minute hand—one full rotation equals 60 seconds, the default IP SLA beat.
This 300-410 practice question tests your understanding of ip sla. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
What is the default frequency (in seconds) for an IP SLA operation when no frequency is explicitly configured?
10 seconds
Why wrong: 10 seconds is not the default; it is a common user-configured value for faster detection.
30 seconds
Why wrong: 30 seconds is not the default; some probe types may use this but the IOS default is 60 seconds.
60 seconds
Correct. The default frequency for IP SLA operations is 60 seconds.
120 seconds
Why wrong: 120 seconds is not the default; it is longer than the standard default.
Answer choices
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
60 seconds
The default frequency for an IP SLA operation is 60 seconds. This means the probe is sent every 60 seconds unless a different frequency is configured under the IP SLA configuration.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
For each option: why learners choose it and why it is or isn't the right answer here.
10 seconds
Why it's wrong here
10 seconds is not the default; it is a common user-configured value for faster detection.
30 seconds
Why it's wrong here
30 seconds is not the default; some probe types may use this but the IOS default is 60 seconds.
60 seconds
Why this is correct
Correct. The default frequency for IP SLA operations is 60 seconds.
Related concept
Read the scenario before looking for a memorised answer.
120 seconds
Why it's wrong here
120 seconds is not the default; it is longer than the standard default.
Common exam traps
Many certification questions include familiar terms but test a specific constraint. Read the exact wording before choosing an answer that is generally true but wrong for this case.
Detailed technical explanation
This question should be treated as a scenario, not a definition check. Identify the problem, the constraint and the best action. Then compare each option against those facts.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
A practitioner preparing for the 300-410 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
What to study next
Identify which 300-410 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
IP SLA — study guide chapter
Learn the concepts, then practise the questions
IP SLA practice questions
Targeted practice on this topic area only
All 300-410 questions
2,152 questions across all exam domains
Cisco CCNP ENARSI 300-410 study guide
Full concept coverage aligned to exam objectives
300-410 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Practise 300-410 questions linked to Layer 3 Technologies.
Practise 300-410 questions linked to EIGRP Troubleshooting.
Practise 300-410 questions linked to OSPF Troubleshooting (v2/v3).
Practise 300-410 questions linked to BGP Troubleshooting.
Practise 300-410 questions linked to Route Redistribution.
Practise 300-410 questions linked to Policy-Based Routing (PBR).
Practise 300-410 questions linked to VRF-Lite.
Practise 300-410 questions linked to Route Maps and Route Filtering.
Practise 300-410 questions linked to Administrative Distance.
Practise 300-410 questions linked to Route Summarization.
Practise 300-410 questions linked to Bidirectional Forwarding Detection (BFD).
Practise 300-410 questions linked to VPN Technologies.
Practice this exam
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
IP SLA — This question tests IP SLA — Read the scenario before looking for a memorised answer..
The correct answer is: 60 seconds — The default frequency for an IP SLA operation is 60 seconds. This means the probe is sent every 60 seconds unless a different frequency is configured under the IP SLA configuration.
Identify which 300-410 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 19, 2026
This 300-410 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 300-410 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.