The answer is that the 'logging trap' command is likely configured with a severity level of 5 (notice) instead of 6 (informational). The 'logging trap informational' command sets the severity threshold to 6, which should allow all messages from severity 0 through 6, including informational messages. However, if only severity 5 messages are being sent and severity 6 messages are not, the most common cause is that the actual configured trap level is 5, not 6—either due to a misconfiguration or a misunderstanding of the command syntax. On the Cisco CCNP ENARSI 300-410 exam, this scenario tests your understanding of syslog severity levels and the precise behavior of the 'logging trap' command, often appearing as a trick question where the engineer assumes the configuration is correct based on the command string. A common memory tip is to remember that the number in the command matches the highest severity included, so "informational" equals level 6, and if you see notices (level 5) but not informationals, the trap level is actually 5.
300-410 Network Logging and Syslog Practice Question
This 300-410 practice question tests your understanding of network logging and syslog. The scenario asks you to isolate a root cause — eliminate options that address a different problem before choosing. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A router is configured with 'logging host 10.1.1.100' and 'logging trap informational'. The engineer notices that syslog messages with severity 5 (notice) are being sent, but messages with severity 6 (informational) are not. What is the most likely cause?
Clue words in this question
Noticing these words before you look at the options changes how you read each choice.
Clue: "most likely"
Why it matters: Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
The 'logging trap' command is set to 5 (notice) rather than 6 (informational).
The 'logging trap informational' command sets the severity threshold to 6, meaning messages of severity 0-6 are sent. However, if the engineer sees that severity 5 messages are sent but severity 6 are not, the issue is likely that the specific informational messages are not being generated by the router, or they are being filtered by a different mechanism such as 'logging filter' or 'exception' settings. But the most common cause is that the 'logging trap' level is actually set to 5 (notice) instead of 6. A misconfiguration or misunderstanding of the command is typical.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
✓
The 'logging trap' command is set to 5 (notice) rather than 6 (informational).
Why this is correct
Correct because if the trap level is 5, only messages severity 0-5 are sent; severity 6 messages are excluded.
Clue confirmation
The clue word "most likely" in the question point toward this answer.
Related concept
Read the scenario before looking for a memorised answer.
✗
The syslog server is dropping severity 6 messages due to its own configuration.
Why it's wrong here
Incorrect because the question states the router is not sending them; the server cannot drop what it never receives.
✗
The 'logging console' command is overriding the remote logging level.
Why it's wrong here
Incorrect because 'logging console' controls console output, not remote syslog.
✗
The router's clock is not synchronized, causing timestamp issues.
Why it's wrong here
Incorrect because clock synchronization affects timestamps but does not filter messages by severity.
Common exam traps
Common exam trap: answer the scenario, not the keyword
Many certification questions include familiar terms but test a specific constraint. Read the exact wording before choosing an answer that is generally true but wrong for this case.
Trap categories for this question
Command / output trap
Incorrect because 'logging console' controls console output, not remote syslog.
Detailed technical explanation
How to think about this question
This question should be treated as a scenario, not a definition check. Identify the problem, the constraint and the best action. Then compare each option against those facts.
KKey Concepts to Remember
Read the scenario before looking for a memorised answer.
Find the constraint that changes the correct option.
Eliminate answers that are true in general but not in this case.
Use explanations to understand the rule behind the answer.
TExam Day Tips
→Underline the problem statement mentally.
→Watch for words such as best, first, most likely and least administrative effort.
→Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A practitioner preparing for the 300-410 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
Related glossary terms
Concepts from this question explained
These glossary pages explain the core terms tested in this 300-410 question in full detail.
Identify which 300-410 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
Network Logging and Syslog — This question tests Network Logging and Syslog — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: The 'logging trap' command is set to 5 (notice) rather than 6 (informational). — The 'logging trap informational' command sets the severity threshold to 6, meaning messages of severity 0-6 are sent. However, if the engineer sees that severity 5 messages are sent but severity 6 are not, the issue is likely that the specific informational messages are not being generated by the router, or they are being filtered by a different mechanism such as 'logging filter' or 'exception' settings. But the most common cause is that the 'logging trap' level is actually set to 5 (notice) instead of 6. A misconfiguration or misunderstanding of the command is typical.
What should I do if I get this 300-410 question wrong?
Identify which 300-410 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
Are there clue words in this question I should notice?
Yes — watch for: "most likely". Probability qualifier — the question wants the most probable cause or outcome, not a guaranteed one. Eliminate low-probability options.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
This 300-410 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 300-410 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.