- A
The 'established' keyword matches TCP packets that have the ACK or RST bit set.
Correct. The keyword checks for ACK or RST bits, which indicate packets belonging to an existing TCP session.
- B
The 'established' keyword can be applied to extended ACLs for UDP traffic to permit return packets.
Why wrong: Incorrect. The 'established' keyword is only for TCP; UDP has no flag bits, so it cannot be used.
- C
The 'established' keyword checks the state of the session in the router's state table.
Why wrong: Incorrect. The keyword only examines TCP flags in the packet header; it does not maintain or consult a state table.
- D
The 'established' keyword can be used in both standard and extended ACLs.
Why wrong: Incorrect. Standard ACLs only match source IP; the 'established' keyword requires the ability to match TCP flags, which is only available in extended ACLs.
- E
The 'established' keyword will match a TCP SYN packet sent from a client to initiate a connection.
Why wrong: Incorrect. A SYN packet has only the SYN bit set, not ACK or RST, so it is not matched by 'established'.
Quick Answer
The answer is that the 'established' keyword in IPv4 ACLs matches TCP packets with the ACK or RST bit set. This is correct because the keyword is designed to permit return traffic from an existing TCP session while blocking initial connection attempts; a SYN-only packet, which starts a new session, will not have these bits set, so it is denied. On the Cisco CCNP ENARSI 300-410 exam, this concept tests your understanding of stateful-like filtering with stateless ACLs, often appearing in questions about securing network traffic or troubleshooting asymmetric routing. A common trap is assuming the keyword matches all TCP packets or that it works with UDP, but it strictly inspects the TCP control bits. For a quick memory tip, think "ACK or RST means established, SYN alone is denied."
300-410 IPv4 Access Control Lists Practice Question
This 300-410 practice question tests your understanding of ipv4 access control lists. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Which TWO statements about the behavior of IPv4 ACLs with the 'established' keyword are true? (Choose TWO.)
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
The 'established' keyword matches TCP packets that have the ACK or RST bit set.
Option A is correct because the 'established' keyword in an extended IPv4 ACL matches TCP packets that have the ACK or RST bit set. This allows return traffic from an established session to pass through the ACL while blocking initial connection attempts, as a SYN packet alone would not have these bits set.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
The 'established' keyword matches TCP packets that have the ACK or RST bit set.
Why this is correct
Correct. The keyword checks for ACK or RST bits, which indicate packets belonging to an existing TCP session.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
The 'established' keyword can be applied to extended ACLs for UDP traffic to permit return packets.
- ✗
The 'established' keyword checks the state of the session in the router's state table.
Why it's wrong here
Incorrect. The keyword only examines TCP flags in the packet header; it does not maintain or consult a state table.
- ✗
The 'established' keyword can be used in both standard and extended ACLs.
Why it's wrong here
Incorrect. Standard ACLs only match source IP; the 'established' keyword requires the ability to match TCP flags, which is only available in extended ACLs.
- ✗
The 'established' keyword will match a TCP SYN packet sent from a client to initiate a connection.
Why it's wrong here
Incorrect. A SYN packet has only the SYN bit set, not ACK or RST, so it is not matched by 'established'.
Common exam traps
Common exam trap: answer the scenario, not the keyword
Cisco often tests the misconception that the 'established' keyword performs stateful inspection or works with UDP, when in reality it is a simple stateless TCP flag check limited to extended ACLs.
Trap categories for this question
Keyword trap
Incorrect. The 'established' keyword is only for TCP; UDP has no flag bits, so it cannot be used.
Detailed technical explanation
How to think about this question
The 'established' keyword works by examining the TCP header's control flags; specifically, it matches packets where the ACK or RST bit is set to 1. This is a stateless mechanism—it does not track sessions but relies on the fact that return packets in a TCP connection typically have the ACK bit set. In real-world scenarios, this can be used to permit responses from a web server while blocking unsolicited inbound SYN packets, but it is not foolproof against spoofed ACK packets.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
TExam Day Tips
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A security administrator must allow nursing staff to reach a patient records server while blocking access from the guest Wi-Fi VLAN. After applying an extended ACL, traffic is still blocked from nursing workstations. The ACL was applied outbound instead of inbound on the wrong interface. Questions like this test ACL direction and placement rules.
What to study next
Got this wrong? Here's your next step.
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
- →
IPv4 Access Control Lists — study guide chapter
Learn the concepts, then practise the questions
- →
IPv4 Access Control Lists practice questions
Targeted practice on this topic area only
- →
All 300-410 questions
2,152 questions across all exam domains
- →
Cisco CCNP ENARSI 300-410 study guide
Full concept coverage aligned to exam objectives
- →
300-410 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 300-410 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Layer 3 Technologies practice questions
Practise 300-410 questions linked to Layer 3 Technologies.
EIGRP Troubleshooting practice questions
Practise 300-410 questions linked to EIGRP Troubleshooting.
OSPF Troubleshooting (v2/v3) practice questions
Practise 300-410 questions linked to OSPF Troubleshooting (v2/v3).
BGP Troubleshooting practice questions
Practise 300-410 questions linked to BGP Troubleshooting.
Route Redistribution practice questions
Practise 300-410 questions linked to Route Redistribution.
Policy-Based Routing (PBR) practice questions
Practise 300-410 questions linked to Policy-Based Routing (PBR).
VRF-Lite practice questions
Practise 300-410 questions linked to VRF-Lite.
Route Maps and Route Filtering practice questions
Practise 300-410 questions linked to Route Maps and Route Filtering.
Administrative Distance practice questions
Practise 300-410 questions linked to Administrative Distance.
Route Summarization practice questions
Practise 300-410 questions linked to Route Summarization.
Bidirectional Forwarding Detection (BFD) practice questions
Practise 300-410 questions linked to Bidirectional Forwarding Detection (BFD).
VPN Technologies practice questions
Practise 300-410 questions linked to VPN Technologies.
Practice this exam
Start a free 300-410 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 300-410 question test?
IPv4 Access Control Lists — This question tests IPv4 Access Control Lists — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: The 'established' keyword matches TCP packets that have the ACK or RST bit set. — Option A is correct because the 'established' keyword in an extended IPv4 ACL matches TCP packets that have the ACK or RST bit set. This allows return traffic from an established session to pass through the ACL while blocking initial connection attempts, as a SYN packet alone would not have these bits set.
What should I do if I get this 300-410 question wrong?
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 24, 2026
This 300-410 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 300-410 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.