Quick Answer
The correct answer is that the IP SLA operation is successful and has a low RTT. This conclusion is drawn directly from the show ip sla statistics output, which reports 100 successes and zero failures, combined with a latest round-trip time of just 10 milliseconds—indicating both reliability and low latency. In the context of the Cisco CCNP ENARSI 300-410 exam, IP SLA operation verification tests your ability to interpret real-time performance metrics and distinguish between a healthy probe and one experiencing timeouts or threshold violations. A common trap is to focus solely on the RTT value without checking the success-to-failure ratio; a single low RTT means nothing if the operation has frequent failures. Remember the memory tip: “Successes over failures tell the real story—RTT is just the cherry on top.”
This 300-410 practice question tests your understanding of device management. Examine the command output carefully: the correct answer depends on what the output actually shows, not on general recall alone. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
A network engineer runs the following command on Router R1:
R1# show ip sla statistics
IPSLAs Latest Statistics:
Round Trip Time (RTT) for Index 1 Latest RTT: 10 ms Latest RTT (milliseconds): 10 Number of successes: 100 Number of failures: 0 Operation time to live: 3000 Operation frequency: 60 seconds Next operation start time: 00:00:45
Based on this output, what is the status of the IP SLA operation?
The IP SLA operation has failed 100 times.
Why wrong: Number of failures is 0.
The IP SLA operation is successful and has a low RTT.
100 successes and 10 ms RTT indicate good performance.
The IP SLA operation is not configured correctly.
Why wrong: The statistics show normal operation.
The IP SLA operation is about to expire.
Why wrong: Time to live is 3000, which is sufficient.
Answer choices
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
The IP SLA operation is successful and has a low RTT.
The output shows 100 successes and 0 failures, with a latest RTT of 10 ms. This indicates the IP SLA operation is functioning correctly.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
For each option: why learners choose it and why it is or isn't the right answer here.
The IP SLA operation has failed 100 times.
Why it's wrong here
Number of failures is 0.
The IP SLA operation is successful and has a low RTT.
Why this is correct
100 successes and 10 ms RTT indicate good performance.
Related concept
Read the scenario before looking for a memorised answer.
The IP SLA operation is not configured correctly.
Why it's wrong here
The statistics show normal operation.
The IP SLA operation is about to expire.
Why it's wrong here
Time to live is 3000, which is sufficient.
Common exam traps
Many certification questions include familiar terms but test a specific constraint. Read the exact wording before choosing an answer that is generally true but wrong for this case.
Trap categories for this question
Command / output trap
The statistics show normal operation.
Detailed technical explanation
This question should be treated as a scenario, not a definition check. Identify the problem, the constraint and the best action. Then compare each option against those facts.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
A practitioner preparing for the 300-410 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
What to study next
Identify which 300-410 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
Device Management — study guide chapter
Learn the concepts, then practise the questions
Device Management practice questions
Targeted practice on this topic area only
All 300-410 questions
2,152 questions across all exam domains
Cisco CCNP ENARSI 300-410 study guide
Full concept coverage aligned to exam objectives
300-410 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Practise 300-410 questions linked to Layer 3 Technologies.
Practise 300-410 questions linked to EIGRP Troubleshooting.
Practise 300-410 questions linked to OSPF Troubleshooting (v2/v3).
Practise 300-410 questions linked to BGP Troubleshooting.
Practise 300-410 questions linked to Route Redistribution.
Practise 300-410 questions linked to Policy-Based Routing (PBR).
Practise 300-410 questions linked to VRF-Lite.
Practise 300-410 questions linked to Route Maps and Route Filtering.
Practise 300-410 questions linked to Administrative Distance.
Practise 300-410 questions linked to Route Summarization.
Practise 300-410 questions linked to Bidirectional Forwarding Detection (BFD).
Practise 300-410 questions linked to VPN Technologies.
Practice this exam
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Device Management — This question tests Device Management — Read the scenario before looking for a memorised answer..
The correct answer is: The IP SLA operation is successful and has a low RTT. — The output shows 100 successes and 0 failures, with a latest RTT of 10 ms. This indicates the IP SLA operation is functioning correctly.
Identify which 300-410 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 18, 2026
This 300-410 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 300-410 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.