Question 909 of 2,152
Control Plane Policing (CoPP)hardMultiple ChoiceObjective-mapped

Quick Answer

The answer is Control Plane Protection (CPPr) exception. This feature allows the control plane to process packets from a specific source IP address without applying CoPP rate limiting by using the `exception` keyword within a class-map, which bypasses the normal policy-map policing actions. On the Cisco CCNP ENARSI 300-410 exam, this tests your understanding of how CPPr extends CoPP by offering granular control, including host-specific exceptions for trusted sources like management servers. A common trap is confusing CPPr exceptions with CoPP’s permit ACLs—remember that CPPr exceptions are defined in the class-map, not the policy-map, and they completely skip rate limiting rather than just matching traffic. For a memory tip, think of the exception as an “express lane” for specific source IPs: once you add the `exception` keyword, that traffic bypasses all CoPP policing, ensuring critical management traffic is never dropped.

300-410 Control Plane Policing (CoPP) Practice Question

This 300-410 practice question tests your understanding of control plane policing (copp). Match the stated requirement to the specific cloud service, access model, or configuration option — many options are valid in isolation but not for this scenario. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

Which CoPP feature allows the control plane to process packets from a specific source IP address without rate limiting?

Question 1hardmultiple choice
Study the full ACL explanation →

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

Control Plane Protection (CPPr) exception

Control Plane Protection (CPPr) allows the creation of exceptions for specific source IP addresses or subnets using the 'exception' keyword within a class-map.

Key principle: Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.

Answer analysis

Option-by-option breakdown

For each option: why learners choose it and why it is or isn't the right answer here.

  • CoPP aggregate policer

    Why it's wrong here

    The aggregate policer applies to all traffic in the class, not per-source exceptions.

  • Control Plane Protection (CPPr) exception

    Why this is correct

    CPPr allows defining exceptions to bypass CoPP for trusted sources, such as management stations or routing peers.

    Related concept

    CIDR notation defines the prefix length.

  • QoS pre-classify

    Why it's wrong here

    QoS pre-classify is used for VPN traffic classification, not for CoPP exceptions.

  • Policy-map 'set' action

    Why it's wrong here

    The 'set' action modifies packet markings, but does not create exceptions to policing.

Common exam traps

Common exam trap: usable hosts are not the same as total addresses

Subnetting questions often tempt you into counting all addresses. In normal IPv4 subnets, the network and broadcast addresses are not usable host addresses.

Detailed technical explanation

How to think about this question

Subnetting questions test whether you can identify the network, broadcast address, usable range, mask and correct subnet. Slow down enough to calculate the block size correctly.

KKey Concepts to Remember

  • CIDR notation defines the prefix length.
  • Block size helps identify subnet boundaries.
  • Network and broadcast addresses are not usable hosts in normal IPv4 subnets.
  • The required host count determines the smallest suitable subnet.

TExam Day Tips

  • Write the block size before choosing the subnet.
  • Check whether the question asks for hosts, subnets or a specific address range.
  • Do not confuse /24, /25, /26 and /27 host counts.

Key takeaway

Count usable hosts — not total addresses — and remember that the network and broadcast addresses are not available to hosts in standard IPv4 subnets.

Real-world example

How this comes up in practice

A network engineer segments a warehouse floor into three subnets: 20 scanners, 5 printers, and 2 management hosts. Picking the wrong mask wastes addresses or leaves too few usable hosts. Exam questions test whether you can apply CIDR notation, calculate block size, and identify the correct usable-host range for a given prefix.

What to study next

Got this wrong? Here's your next step.

Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related 300-410 subnetting questions on CIDR, address ranges, and subnet selection.

Related practice questions

Related 300-410 practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Practice this exam

Start a free 300-410 practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

FAQ

Questions learners often ask

What does this 300-410 question test?

Control Plane Policing (CoPP) — This question tests Control Plane Policing (CoPP) — CIDR notation defines the prefix length..

What is the correct answer to this question?

The correct answer is: Control Plane Protection (CPPr) exception — Control Plane Protection (CPPr) allows the creation of exceptions for specific source IP addresses or subnets using the 'exception' keyword within a class-map.

What should I do if I get this 300-410 question wrong?

Review block sizes, usable host formulas (2^n − 2), and how to find network and broadcast addresses for /24 through /30. Then practise related 300-410 subnetting questions on CIDR, address ranges, and subnet selection.

What is the key concept behind this question?

CIDR notation defines the prefix length.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Last reviewed: Jun 18, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This 300-410 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 300-410 exam.