- A
CoPP uses Modular QoS CLI (MQC) to define traffic classes and actions.
CoPP relies on MQC with class maps to match traffic and policy maps to define policing actions.
- B
CoPP is applied directly to physical interfaces to protect the control plane.
Why wrong: CoPP is applied globally to the control plane using the 'service-policy input' command under 'control-plane', not to individual interfaces.
- C
CoPP can be used to rate-limit traffic destined to the CPU, such as routing protocol packets or management traffic.
CoPP is designed to police traffic that is processed by the route processor, including OSPF, BGP, SSH, and SNMP.
- D
CoPP operates at Layer 2 to filter Ethernet frames before they reach the CPU.
Why wrong: CoPP operates at Layer 3 and above, classifying packets based on IP headers and upper-layer information, not Ethernet frames.
- E
CoPP replaces the need for access control lists (ACLs) on the device.
Why wrong: CoPP complements ACLs but does not replace them; ACLs are often used within class maps for CoPP classification.
Quick Answer
The answer is that CoPP can be used to rate-limit traffic destined to the CPU, such as routing protocol packets or management traffic. This is correct because Control Plane Policing (CoPP) applies a Modular QoS CLI (MQC) service policy directly to the control plane, classifying packets like OSPF hellos or SSH and policing them to protect the CPU from overload. On the Cisco CCNP ENARSI 300-410 exam, this concept tests your understanding of control plane protection mechanisms, often appearing in a “choose two” format where one distractor suggests CoPP is applied to interfaces—a common trap. Remember, CoPP works at Layer 3 and above, not Layer 2, and it complements ACLs rather than replacing them. A helpful memory tip: think of CoPP as a “CPU bouncer” that checks ID (classifies) and limits entry (polices) at the control plane door, not at the interface gate.
300-410 Control Plane Policing (CoPP) Practice Question
This 300-410 practice question tests your understanding of control plane policing (copp). Match the stated requirement to the specific cloud service, access model, or configuration option — many options are valid in isolation but not for this scenario. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Which TWO statements about Control Plane Policing (CoPP) are true? (Choose TWO.)
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
CoPP uses Modular QoS CLI (MQC) to define traffic classes and actions.
CoPP applies a QoS service policy to the control plane to rate-limit traffic, protecting the CPU from excessive packets. It uses MQC (class maps and policy maps) to classify and police traffic. CoPP is not applied to interfaces directly; it is applied to the control plane. It does not filter traffic at Layer 2; it works at Layer 3 and above. CoPP does not replace ACLs; it works alongside them.
Key principle: ACLs process entries top to bottom and stop at the first match. Entry order and interface direction matter as much as the permit or deny statement.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
CoPP uses Modular QoS CLI (MQC) to define traffic classes and actions.
Why this is correct
CoPP relies on MQC with class maps to match traffic and policy maps to define policing actions.
Related concept
Standard ACLs match source addresses.
- ✗
CoPP is applied directly to physical interfaces to protect the control plane.
Why it's wrong here
CoPP is applied globally to the control plane using the 'service-policy input' command under 'control-plane', not to individual interfaces.
- ✓
CoPP can be used to rate-limit traffic destined to the CPU, such as routing protocol packets or management traffic.
- ✗
CoPP operates at Layer 2 to filter Ethernet frames before they reach the CPU.
Why it's wrong here
CoPP operates at Layer 3 and above, classifying packets based on IP headers and upper-layer information, not Ethernet frames.
- ✗
CoPP replaces the need for access control lists (ACLs) on the device.
Why it's wrong here
CoPP complements ACLs but does not replace them; ACLs are often used within class maps for CoPP classification.
Common exam traps
Common exam trap: ACLs stop at the first match
ACLs are processed top to bottom. The first matching entry wins, and an implicit deny usually exists at the end.
Trap categories for this question
Command / output trap
CoPP is applied globally to the control plane using the 'service-policy input' command under 'control-plane', not to individual interfaces.
Detailed technical explanation
How to think about this question
ACL questions test precision: source, destination, protocol, port and direction. A generally correct ACL can still fail if it is applied on the wrong interface or in the wrong direction.
KKey Concepts to Remember
- Standard ACLs match source addresses.
- Extended ACLs can match source, destination, protocol and ports.
- The first matching ACL entry is used.
- There is usually an implicit deny at the end.
TExam Day Tips
- Check inbound versus outbound direction.
- Read the ACL from top to bottom.
- Look for a broader permit or deny above the intended line.
Key takeaway
ACLs process entries top to bottom and stop at the first match. Entry order and interface direction matter as much as the permit or deny statement.
Real-world example
How this comes up in practice
A security administrator must allow nursing staff to reach a patient records server while blocking access from the guest Wi-Fi VLAN. After applying an extended ACL, traffic is still blocked from nursing workstations. The ACL was applied outbound instead of inbound on the wrong interface. Questions like this test ACL direction and placement rules.
What to study next
Got this wrong? Here's your next step.
Review ACL processing order, placement rules (standard near destination, extended near source), and inbound vs outbound direction. Study wildcard masks and implicit deny. Then practise related 300-410 ACL questions on filtering logic and placement.
- →
Control Plane Policing (CoPP) — study guide chapter
Learn the concepts, then practise the questions
- →
Control Plane Policing (CoPP) practice questions
Targeted practice on this topic area only
- →
All 300-410 questions
2,152 questions across all exam domains
- →
Cisco CCNP ENARSI 300-410 study guide
Full concept coverage aligned to exam objectives
- →
300-410 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 300-410 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Layer 3 Technologies practice questions
Practise 300-410 questions linked to Layer 3 Technologies.
EIGRP Troubleshooting practice questions
Practise 300-410 questions linked to EIGRP Troubleshooting.
OSPF Troubleshooting (v2/v3) practice questions
Practise 300-410 questions linked to OSPF Troubleshooting (v2/v3).
BGP Troubleshooting practice questions
Practise 300-410 questions linked to BGP Troubleshooting.
Route Redistribution practice questions
Practise 300-410 questions linked to Route Redistribution.
Policy-Based Routing (PBR) practice questions
Practise 300-410 questions linked to Policy-Based Routing (PBR).
VRF-Lite practice questions
Practise 300-410 questions linked to VRF-Lite.
Route Maps and Route Filtering practice questions
Practise 300-410 questions linked to Route Maps and Route Filtering.
Administrative Distance practice questions
Practise 300-410 questions linked to Administrative Distance.
Route Summarization practice questions
Practise 300-410 questions linked to Route Summarization.
Bidirectional Forwarding Detection (BFD) practice questions
Practise 300-410 questions linked to Bidirectional Forwarding Detection (BFD).
VPN Technologies practice questions
Practise 300-410 questions linked to VPN Technologies.
Practice this exam
Start a free 300-410 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 300-410 question test?
Control Plane Policing (CoPP) — This question tests Control Plane Policing (CoPP) — Standard ACLs match source addresses..
What is the correct answer to this question?
The correct answer is: CoPP uses Modular QoS CLI (MQC) to define traffic classes and actions. — CoPP applies a QoS service policy to the control plane to rate-limit traffic, protecting the CPU from excessive packets. It uses MQC (class maps and policy maps) to classify and police traffic. CoPP is not applied to interfaces directly; it is applied to the control plane. It does not filter traffic at Layer 2; it works at Layer 3 and above. CoPP does not replace ACLs; it works alongside them.
What should I do if I get this 300-410 question wrong?
Review ACL processing order, placement rules (standard near destination, extended near source), and inbound vs outbound direction. Study wildcard masks and implicit deny. Then practise related 300-410 ACL questions on filtering logic and placement.
What is the key concept behind this question?
Standard ACLs match source addresses.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More 300-410 practice questions
- Drag and drop the steps to negotiate an IKEv2 IPsec site-to-site tunnel into the correct order, from first to last.
- Drag and drop the steps to troubleshoot an IPsec site-to-site VPN adjacency failure into the correct order, from first t…
- Drag and drop the steps to verify and validate the operational state of an IPsec site-to-site VPN into the correct order…
- Drag and drop the steps to configure a GRE tunnel for IPv6 over IPv4 into the correct order, from first to last.
- Drag and drop the steps to troubleshoot IPv6 over IPv4 tunnel adjacency or connectivity failures into the correct order,…
- Drag and drop the steps to verify and validate the operational state of an IPv6 tunneling technique into the correct ord…
Last reviewed: Jun 18, 2026
This 300-410 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 300-410 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.