300-710 SNCF Deployment Practice Question
An FTD device is configured in routed mode. What must be configured to allow traffic to exit the network through the firewall?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
A static route pointing to the gateway.
In routed mode, the FTD acts as a router; therefore, an upstream default route or specific static routes are required to forward traffic to the next hop.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
An inline bypass pair.
Why it's wrong here
Bypass is for interface-level failover.
- ✗
A bridge group interface.
Why it's wrong here
Bridge groups are for transparent mode.
- ✗
A passive monitoring interface.
Why it's wrong here
Passive mode does not route traffic.
- ✓
A static route pointing to the gateway.
Why this is correct
Static routing is required for L3 forwarding in routed mode.
About these practice questions
Courseiva writes every 300-710 SNCF question from scratch — 478 in total, each with an explanation and a wrong-answer breakdown. None are copied from real exams or dumps. Learn why practice questions differ from exam dumps →
JA
Written and reviewed by Johnson Ajibi, MSc IT Security
Senior Network & Security Engineer · founder of Courseiva
Last reviewed August 2026 · checked against the official Cisco exam blueprint
This 300-710 SNCF practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 300-710 SNCF exam.