300-710 SNCF Management And Troubleshooting Practice Question
An engineer is troubleshooting a packet capture configuration on an FTD device managed by FMC. Which THREE statements regarding FTD packet capture behavior and limitations are correct? (Choose three)
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Packet captures on FTD capture decrypted payload content for IPsec traffic terminated on the firewall if specified with crypto options.
FTD packet captures can capture ingress/egress, have buffer size limits, and can utilize access control lists or filters, but they cannot capture encrypted payload content post-decryption unless terminated on the box.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
Packet captures can record up to 10 gigabytes of data directly into NVRAM.
Why it's wrong here
Captures are stored in RAM/disk cache, not NVRAM, and 10GB is far beyond typical capture buffer allocations.
- ✗
Packet captures require a mandatory Access Control Rule permit entry for the captured traffic to be processed.
Why it's wrong here
Packet captures hook into interface drivers and inspection points independently of ACP rule permits, though traffic must reach the interface.
- ✓
Packet captures on FTD capture decrypted payload content for IPsec traffic terminated on the firewall if specified with crypto options.
Why this is correct
Capturing decrypted traffic or using specific filters allows viewing decrypted payloads on the terminating device.
- ✓
Packet captures can be configured to capture traffic on multiple interfaces simultaneously.
Why this is correct
Administrators can configure multiple capture instances on different interfaces.
- ✓
Packet capture buffers have a maximum size limit, and older packets are overwritten when the buffer fills up unless exported.
Why this is correct
FTD capture buffers wrap around (circular buffer) when they reach capacity.
Visual reference
About these practice questions
Courseiva writes every 300-710 SNCF question from scratch — 478 in total, each with an explanation and a wrong-answer breakdown. None are copied from real exams or dumps. Learn why practice questions differ from exam dumps →
JA
Written and reviewed by Johnson Ajibi, MSc IT Security
Senior Network & Security Engineer · founder of Courseiva
Last reviewed August 2026 · checked against the official Cisco exam blueprint
This 300-710 SNCF practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 300-710 SNCF exam.