Question 1 of 500
ServiceseasyMultiple ChoiceObjective-mapped

Quick Answer

The answer is VRF-aware NAT, which allows the PE router to translate traffic from a VRF customer into the global routing table for Internet access. This feature works by configuring the NAT outside interface in the global routing instance, enabling the router to perform address translation without leaking Internet routes into the MPLS L3VPN. On the Cisco SPCOR 350-501 exam, this scenario tests your understanding of how to provide Internet access to VPN customers while maintaining strict VRF isolation—a common service provider requirement. A frequent trap is assuming route leaking or a VRF-aware firewall is needed, but the exam emphasizes that VRF-aware NAT is the standard Cisco solution for this exact use case. Remember the memory tip: “NAT outside in global, VRF inside stays local.”

350-501 Services Practice Question

This 350-501 practice question tests your understanding of services. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.

A service provider wants to provide Internet access to an MPLS L3VPN customer without leaking the Internet route into the VRF. Which feature allows the PE to forward traffic from the VRF to the global routing table?

Question 1easymultiple choice
Read the full MPLS explanation →

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

NAT with VRF awareness

Option A is correct because VRF-Aware NAT with outside interface in global routing enables NAT. Option B is wrong because VRF-Aware Firewall is not a standard feature. Option C is wrong because route leaking is what they want to avoid. Option D is wrong because static routing does not provide Internet access without default route.

Key principle: NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.

Answer analysis

Option-by-option breakdown

For each option: why learners choose it and why it is or isn't the right answer here.

  • Static default route from VRF to global

    Why it's wrong here

    A static route could direct traffic but without NAT the return traffic won't know VRF.

  • Route leaking between VRF and global

    Why it's wrong here

    Leaking routes would expose the global table to the customer.

  • VRF-Aware Firewall

    Why it's wrong here

    Not a standard Cisco feature for this purpose.

  • NAT with VRF awareness

    Why this is correct

    NAT translates VRF source IP to global IP and route via global table.

    Related concept

    Static NAT maps one inside address to one outside address.

Common exam traps

Common exam trap: NAT rules depend on direction and matching traffic

NAT is not only about the public address. The inside/outside interface roles and the ACL or rule that matches traffic are just as important.

Detailed technical explanation

How to think about this question

NAT questions usually test address translation, overload/PAT behaviour, static mappings and whether the right traffic is being translated. Read the interface direction and address terms carefully.

KKey Concepts to Remember

  • Static NAT maps one inside address to one outside address.
  • PAT allows many inside hosts to share one public address using ports.
  • Inside local and inside global describe the private and translated addresses.
  • NAT ACLs identify traffic for translation, not always security filtering.

TExam Day Tips

  • Identify inside and outside interfaces first.
  • Check whether the scenario needs static NAT, dynamic NAT or PAT.
  • Do not confuse NAT matching ACLs with normal packet-filtering intent.

Key takeaway

NAT direction and interface roles matter as much as the IP address mapping. Inside/outside designation controls which traffic is translated.

Real-world example

How this comes up in practice

A small business has 20 workstations on the 192.168.1.0/24 network and one public IP from its ISP. The router uses PAT (NAT overload) so all 20 devices share one public address using different source ports. NAT questions test whether you understand the four address terms and which direction each translation applies.

What to study next

Got this wrong? Here's your next step.

Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related 350-501 NAT questions on configuration and troubleshooting.

Related practice questions

Related 350-501 practice-question pages

Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.

Practice this exam

Start a free 350-501 practice session

Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.

FAQ

Questions learners often ask

What does this 350-501 question test?

Services — This question tests Services — Static NAT maps one inside address to one outside address..

What is the correct answer to this question?

The correct answer is: NAT with VRF awareness — Option A is correct because VRF-Aware NAT with outside interface in global routing enables NAT. Option B is wrong because VRF-Aware Firewall is not a standard feature. Option C is wrong because route leaking is what they want to avoid. Option D is wrong because static routing does not provide Internet access without default route.

What should I do if I get this 350-501 question wrong?

Review the four NAT address types (inside local, inside global, outside local, outside global), PAT port overload, and static vs dynamic NAT use cases. Then practise related 350-501 NAT questions on configuration and troubleshooting.

What is the key concept behind this question?

Static NAT maps one inside address to one outside address.

About these practice questions

Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

Last reviewed: Jun 24, 2026

Question Discussion

Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.

Loading comments…

Sign in to join the discussion.

This 350-501 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-501 exam.