- A
Log
Why wrong: Incorrect. Log is a setting, not an action.
- B
Reset
Why wrong: Incorrect. Reset is not an access control rule action; it may be a TCP reset option.
- C
Redirect
Why wrong: Incorrect. Redirect is not an access control rule action; it's used for authentication or web proxy.
- D
Allow
Correct. Allow permits traffic and applies further inspection.
- E
Trust
Correct. Trust allows traffic without further inspection.
Question 634 of 988
350-701 Network Security Practice Question
This 350-701 practice question tests your understanding of network security. Match the stated requirement to the specific cloud service, access model, or configuration option — many options are valid in isolation but not for this scenario. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Which two actions are valid actions in a Cisco Firepower access control rule? (Choose two.)
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Allow
In Firepower access control policy, the actions are Trust (skip further inspection), Allow (permit and inspect), Block (block traffic), and Interactive Block (present a block page). These are standard actions.
Key principle: ACLs process entries top to bottom and stop at the first match. Entry order and interface direction matter as much as the permit or deny statement.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
Log
Why it's wrong here
Incorrect. Log is a setting, not an action.
- ✗
Reset
Why it's wrong here
Incorrect. Reset is not an access control rule action; it may be a TCP reset option.
- ✗
Redirect
Why it's wrong here
Incorrect. Redirect is not an access control rule action; it's used for authentication or web proxy.
- ✓
Allow
Why this is correct
Correct. Allow permits traffic and applies further inspection.
Related concept
Standard ACLs match source addresses.
- ✓
Trust
Why this is correct
Correct. Trust allows traffic without further inspection.
Related concept
Standard ACLs match source addresses.
Common exam traps
Common exam trap: ACLs stop at the first match
ACLs are processed top to bottom. The first matching entry wins, and an implicit deny usually exists at the end.
Detailed technical explanation
How to think about this question
ACL questions test precision: source, destination, protocol, port and direction. A generally correct ACL can still fail if it is applied on the wrong interface or in the wrong direction.
KKey Concepts to Remember
- Standard ACLs match source addresses.
- Extended ACLs can match source, destination, protocol and ports.
- The first matching ACL entry is used.
- There is usually an implicit deny at the end.
TExam Day Tips
- Check inbound versus outbound direction.
- Read the ACL from top to bottom.
- Look for a broader permit or deny above the intended line.
Key takeaway
ACLs process entries top to bottom and stop at the first match. Entry order and interface direction matter as much as the permit or deny statement.
Real-world example
How this comes up in practice
A security administrator must allow nursing staff to reach a patient records server while blocking access from the guest Wi-Fi VLAN. After applying an extended ACL, traffic is still blocked from nursing workstations. The ACL was applied outbound instead of inbound on the wrong interface. Questions like this test ACL direction and placement rules.
What to study next
Got this wrong? Here's your next step.
Review ACL processing order, placement rules (standard near destination, extended near source), and inbound vs outbound direction. Study wildcard masks and implicit deny. Then practise related 350-701 ACL questions on filtering logic and placement.
- →
Network Security — study guide chapter
Learn the concepts, then practise the questions
- →
Network Security practice questions
Targeted practice on this topic area only
- →
All 350-701 questions
988 questions across all exam domains
- →
Cisco SCOR / CCNP Security Core 350-701 study guide
Full concept coverage aligned to exam objectives
- →
350-701 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 350-701 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Security Concepts practice questions
Practise 350-701 questions linked to Security Concepts.
Network Security practice questions
Practise 350-701 questions linked to Network Security.
Endpoint Security and Identity practice questions
Practise 350-701 questions linked to Endpoint Security and Identity.
Cloud Security practice questions
Practise 350-701 questions linked to Cloud Security.
Content Security practice questions
Practise 350-701 questions linked to Content Security.
Endpoint Protection and Detection practice questions
Practise 350-701 questions linked to Endpoint Protection and Detection.
Secure Network Access, Visibility and Enforcement practice questions
Practise 350-701 questions linked to Secure Network Access, Visibility and Enforcement.
350-701 fundamentals practice questions
Practise 350-701 questions linked to 350-701 fundamentals.
350-701 scenario practice questions
Practise 350-701 questions linked to 350-701 scenario.
350-701 troubleshooting practice questions
Practise 350-701 questions linked to 350-701 troubleshooting.
Practice this exam
Start a free 350-701 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 350-701 question test?
Network Security — This question tests Network Security — Standard ACLs match source addresses..
What is the correct answer to this question?
The correct answer is: Allow — In Firepower access control policy, the actions are Trust (skip further inspection), Allow (permit and inspect), Block (block traffic), and Interactive Block (present a block page). These are standard actions.
What should I do if I get this 350-701 question wrong?
Review ACL processing order, placement rules (standard near destination, extended near source), and inbound vs outbound direction. Study wildcard masks and implicit deny. Then practise related 350-701 ACL questions on filtering logic and placement.
What is the key concept behind this question?
Standard ACLs match source addresses.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jul 4, 2026
This 350-701 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-701 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.