Drag steps to the numbered slots on the right, or tap a step then tap a slot.
Steps
Order
1Step 1
2Step 2
3Step 3
4Step 4
5Step 5
350-701 Endpoint Protection and Detection Practice Question
Drag and drop the steps to configure a Cisco ASA for remote access VPN using AnyConnect in the correct order.
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
Enable AnyConnect image, then Define IP pool, then Group policy, then Tunnel group, then Apply to interface
First enable AnyConnect image, then define IP pool, group policy, tunnel group, and apply to interface.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
Enable AnyConnect image, then Define IP pool, then Group policy, then Tunnel group, then Apply to interface
Why this is correct
This is the correct order because AnyConnect image must be enabled first to allow VPN connections, then an IP pool is defined for client addressing, followed by group policy for attributes, tunnel group for connection parameters, and finally applied to the interface to activate.
- ✗
Apply to interface, then Enable AnyConnect image, then Define IP pool, then Group policy, then Tunnel group
Why it's wrong here
This is incorrect because applying the configuration to the interface should be the final step after all other components are configured; doing so prematurely may cause interface misconfiguration.
- ✗
Enable AnyConnect image, then Group policy, then Define IP pool, then Tunnel group, then Apply to interface
Why it's wrong here
This is incorrect because the IP pool must be defined before the group policy references it; otherwise the group policy may fail to apply correctly.
- ✗
Enable AnyConnect image, then Define IP pool, then Tunnel group, then Group policy, then Apply to interface
Why it's wrong here
This is incorrect because the tunnel group references the group policy, so the group policy must be created before the tunnel group; reversing them leads to referencing an undefined policy.
Go deeper
Related to this question
About these practice questions
One of 978 original 350-701 practice questions on Courseiva, each with a full explanation and wrong-answer analysis — not exam dumps or protected exam content. Learn why practice questions differ from exam dumps →
JA
Written by Johnson Ajibi, MSc IT Security
Senior Network & Security Engineer · founder of Courseiva
This 350-701 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-701 exam.