- A
FCIP uses VE_port (Virtual E_port) interfaces to connect to the FC fabric
VE_ports terminate FCIP tunnels.
- B
FCIP requires IPsec for security over public networks
Why wrong: IPsec is optional but recommended.
- C
FCIP can be used in conjunction with Fibre Channel port channels
FCIP port channels provide redundancy.
- D
FCIP compression reduces the latency of the IP transport
Why wrong: Compression adds processing delay.
- E
FCIP can be configured on a GigabitEthernet interface
FCIP uses Ethernet interfaces for IP transport.
Quick Answer
The correct answer includes options B, D, and E because FCIP configurations on Cisco MDS switches rely on three core principles. First, FCIP can be configured directly on a GigabitEthernet interface, allowing IP networks to transport Fibre Channel frames. Second, FCIP can be combined with FC port channels to provide redundancy and load balancing across multiple physical links, which is essential for high-availability storage networks. Third, FCIP uses Virtual E_ports (VE_ports) to logically connect to the Fibre Channel fabric, emulating an inter-switch link over IP. On the Cisco DCCOR and CCNP Data Center Core 350-601 exam, this topic tests your understanding of how to extend Fibre Channel fabrics over IP WANs, often appearing in scenario-based questions about disaster recovery or data center interconnect. A common trap is assuming IPsec is mandatory for FCIP—it is optional, not required. Another trap is confusing compression with bandwidth reduction; compression actually reduces bandwidth usage. Remember the memory tip: "GigE, VE, and Port Channel—three pillars of FCIP."
350-601 Storage Network Practice Question
This 350-601 practice question tests your understanding of storage network. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Which THREE statements accurately describe FCIP (Fibre Channel over IP) configurations on Cisco MDS switches?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
FCIP uses VE_port (Virtual E_port) interfaces to connect to the FC fabric
Options B, D, and E are correct. FCIP can operate over Gigabit Ethernet interfaces (B). FCIP can be combined with FC port channels to provide redundancy and load balancing (D). FCIP uses Virtual E_ports (VE_ports) to connect to the FC fabric (E). Option A is wrong: Compression reduces bandwidth usage, not reduces bandwidth. Option C is wrong: IPsec is optional, not required.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
FCIP uses VE_port (Virtual E_port) interfaces to connect to the FC fabric
Why this is correct
VE_ports terminate FCIP tunnels.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
FCIP requires IPsec for security over public networks
Why it's wrong here
IPsec is optional but recommended.
- ✓
FCIP can be used in conjunction with Fibre Channel port channels
Why this is correct
FCIP port channels provide redundancy.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
FCIP compression reduces the latency of the IP transport
Why it's wrong here
Compression adds processing delay.
- ✓
FCIP can be configured on a GigabitEthernet interface
Why this is correct
FCIP uses Ethernet interfaces for IP transport.
Related concept
Read the scenario before looking for a memorised answer.
Common exam traps
Common exam trap: answer the scenario, not the keyword
Many certification questions include familiar terms but test a specific constraint. Read the exact wording before choosing an answer that is generally true but wrong for this case.
Detailed technical explanation
How to think about this question
This question should be treated as a scenario, not a definition check. Identify the problem, the constraint and the best action. Then compare each option against those facts.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
- Use explanations to understand the rule behind the answer.
TExam Day Tips
- Underline the problem statement mentally.
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A practitioner preparing for the 350-601 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
What to study next
Got this wrong? Here's your next step.
Identify which 350-601 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
- →
Storage Network — study guide chapter
Learn the concepts, then practise the questions
- →
Storage Network practice questions
Targeted practice on this topic area only
- →
All 350-601 questions
500 questions across all exam domains
- →
Cisco DCCOR / CCNP Data Center Core 350-601 study guide
Full concept coverage aligned to exam objectives
- →
350-601 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 350-601 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Network practice questions
Practise 350-601 questions linked to Network.
Compute practice questions
Practise 350-601 questions linked to Compute.
Storage Network practice questions
Practise 350-601 questions linked to Storage Network.
Automation practice questions
Practise 350-601 questions linked to Automation.
Security practice questions
Practise 350-601 questions linked to Security.
350-601 fundamentals practice questions
Practise 350-601 questions linked to 350-601 fundamentals.
350-601 scenario practice questions
Practise 350-601 questions linked to 350-601 scenario.
350-601 troubleshooting practice questions
Practise 350-601 questions linked to 350-601 troubleshooting.
Practice this exam
Start a free 350-601 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 350-601 question test?
Storage Network — This question tests Storage Network — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: FCIP uses VE_port (Virtual E_port) interfaces to connect to the FC fabric — Options B, D, and E are correct. FCIP can operate over Gigabit Ethernet interfaces (B). FCIP can be combined with FC port channels to provide redundancy and load balancing (D). FCIP uses Virtual E_ports (VE_ports) to connect to the FC fabric (E). Option A is wrong: Compression reduces bandwidth usage, not reduces bandwidth. Option C is wrong: IPsec is optional, not required.
What should I do if I get this 350-601 question wrong?
Identify which 350-601 exam domain this question belongs to, then review the specific concept being tested. Practise related questions in that domain and focus on understanding why each wrong answer is tempting — not just why the correct answer is right.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Last reviewed: Jun 24, 2026
This 350-601 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-601 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.