- A
All member ports must be in the same VSAN
PortChannel members must belong to the same VSAN.
- B
A PortChannel interface must be created
A logical PortChannel interface must be created and members added.
- C
All member ports must have the same speed
PortChannel requires consistent speed across all members.
- D
NPV mode must be enabled on the switch
Why wrong: NPV mode is not required for PortChannels.
- E
All member ports must be configured as F-ports
Why wrong: PortChannels can be used with E-ports for ISL, not just F-ports.
Question 54 of 1,000
350-601 Storage Network Practice Question
This 350-601 practice question tests your understanding of storage network. This is a configuration task: choose the command set that satisfies every stated requirement. Small differences — like 'secret' vs 'password' or 'transport input ssh' vs 'all' — change whether the answer is correct. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
Which THREE of the following are required to configure Fibre Channel PortChannels on Cisco MDS switches?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
All member ports must be in the same VSAN
Fibre Channel PortChannels require that all member ports have the same speed and configuration, and that they are on the same switch. They can be used with E-ports for ISL trunking.
Key principle: A trunk being up does not mean the VLAN is allowed across it. Always verify the allowed VLAN list and whether the VLAN exists on both switches.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✓
All member ports must be in the same VSAN
Why this is correct
PortChannel members must belong to the same VSAN.
Related concept
Access ports place end devices into a single VLAN.
- ✓
A PortChannel interface must be created
Why this is correct
A logical PortChannel interface must be created and members added.
Related concept
Access ports place end devices into a single VLAN.
- ✓
All member ports must have the same speed
Why this is correct
PortChannel requires consistent speed across all members.
Related concept
Access ports place end devices into a single VLAN.
- ✗
NPV mode must be enabled on the switch
Why it's wrong here
NPV mode is not required for PortChannels.
- ✗
All member ports must be configured as F-ports
Why it's wrong here
PortChannels can be used with E-ports for ISL, not just F-ports.
Common exam traps
Common exam trap: an active trunk can still block the VLAN you need
A trunk being up does not prove every VLAN is crossing it. Check allowed VLAN lists, native VLAN mismatch, VLAN existence and access-port assignment.
Detailed technical explanation
How to think about this question
VLAN questions usually combine access-port and trunking clues. The key is to identify whether the issue is local to one switchport, caused by the trunk, or caused by the VLAN not existing where it needs to exist.
KKey Concepts to Remember
- Access ports place end devices into a single VLAN.
- Trunk ports carry multiple VLANs between switches.
- Allowed VLAN lists decide which VLANs can cross a trunk.
- Native VLAN mismatch can create confusing symptoms.
TExam Day Tips
- Use show vlan brief to verify access VLANs.
- Use show interfaces trunk to verify trunk state and allowed VLANs.
- Do not treat every same-VLAN issue as a routing problem.
Key takeaway
A trunk being up does not mean the VLAN is allowed across it. Always verify the allowed VLAN list and whether the VLAN exists on both switches.
Real-world example
How this comes up in practice
A help-desk technician troubleshoots why a newly connected PC cannot reach shared printers on the same floor. The cable is good, the switch port is active, but the PC is in VLAN 20 and the printers are in VLAN 10. The uplink trunk only allows VLAN 10. A trunk being up does not mean every VLAN crosses it.
What to study next
Got this wrong? Here's your next step.
Review VLAN allowed lists, native VLAN mismatch detection, and how to verify VLAN membership with show vlan brief and show interfaces trunk. Then practise related 350-601 questions on switching, trunking, and access-port configuration.
- →
Storage Network — study guide chapter
Learn the concepts, then practise the questions
- →
Storage Network practice questions
Targeted practice on this topic area only
- →
All 350-601 questions
1,000 questions across all exam domains
- →
Cisco DCCOR / CCNP Data Center Core 350-601 study guide
Full concept coverage aligned to exam objectives
- →
350-601 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 350-601 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Security practice questions
Practise 350-601 questions linked to Security.
Network practice questions
Practise 350-601 questions linked to Network.
Storage Network practice questions
Practise 350-601 questions linked to Storage Network.
Automation practice questions
Practise 350-601 questions linked to Automation.
Compute practice questions
Practise 350-601 questions linked to Compute.
350-601 fundamentals practice questions
Practise 350-601 questions linked to 350-601 fundamentals.
350-601 scenario practice questions
Practise 350-601 questions linked to 350-601 scenario.
350-601 troubleshooting practice questions
Practise 350-601 questions linked to 350-601 troubleshooting.
Practice this exam
Start a free 350-601 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 350-601 question test?
Storage Network — This question tests Storage Network — Access ports place end devices into a single VLAN..
What is the correct answer to this question?
The correct answer is: All member ports must be in the same VSAN — Fibre Channel PortChannels require that all member ports have the same speed and configuration, and that they are on the same switch. They can be used with E-ports for ISL trunking.
What should I do if I get this 350-601 question wrong?
Review VLAN allowed lists, native VLAN mismatch detection, and how to verify VLAN membership with show vlan brief and show interfaces trunk. Then practise related 350-601 questions on switching, trunking, and access-port configuration.
What is the key concept behind this question?
Access ports place end devices into a single VLAN.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More 350-601 practice questions
- In Cisco ACI, which component is responsible for translating EPG communication policies into concrete configuration on l…
- An engineer is configuring OSPF on a Cisco Nexus switch in a data center. The network consists of multiple point-to-poin…
- An engineer is configuring BGP EVPN for VXLAN in a spine-leaf fabric. The leaf switches must advertise host IP-to-MAC ma…
- Which VLAN range is reserved by default on Cisco Nexus switches?
- In VXLAN overlay networks, which mechanism is used to forward broadcast, unknown unicast, and multicast (BUM) traffic wh…
- Which command is used to verify the OSPF neighbor state in NX-OS?
Last reviewed: Jul 4, 2026
This 350-601 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-601 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.