Courseiva
Storage NetworkmediumMultiple ChoiceObjective-mapped

350-601 Storage Network Practice Question

Exhibit

switch# show flogi database

INTERFACE   VSAN    FCID            PORT NAME               NODE NAME
fc1/1       100     0x010001        10:00:00:00:c9:2b:1a:5f 20:00:00:00:c9:2b:1a:5f
fc1/2       100     0x010002        10:00:00:00:c9:2b:1a:60 20:00:00:00:c9:2b:1a:60
fc1/4       100     0x010003        10:00:00:00:c9:2b:1a:61 20:00:00:00:c9:2b:1a:61

Refer to the exhibit. A server connected to interface fc1/3 on the MDS switch cannot log in to the fabric. The server's HBA WWPN is 10:00:00:00:c9:2b:1a:62. What is the most likely reason for the login failure?

⚠ Common exam trap

Cisco often tests the distinction between pre-login requirements (VSAN assignment, port mode) and post-login requirements (zoning, NPIV), so the trap here is assuming zone membership is checked before the server can log in, when in fact FLOGI must succeed first.

Answer choices

Why each option matters

Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.

Correct answer & explanation

Interface fc1/3 is not assigned to VSAN 100

Interface fc1/3 is not assigned to VSAN 100, as shown in the exhibit (the interface is in VSAN 1 by default or another VSAN). Without being in the correct VSAN, the server's FLOGI (Fabric Login) request is processed in the wrong VSAN context, preventing it from logging into the fabric and accessing the intended storage targets. Assigning the interface to the correct VSAN is mandatory for successful fabric login.

Answer analysis

Option-by-option breakdown

For each option: why learners choose it and why it is or isn't the right answer here.

  • NPIV is disabled on the port

    Why it's wrong here

    NPIV is for multiple logins, not primary login.

  • The server's WWPN is not in the active zone set

    Why it's wrong here

    FLOGI would still succeed and show in database.

  • Interface fc1/3 is not assigned to VSAN 100

    Why this is correct

    Without correct VSAN, the port cannot participate.

  • The link speed is mismatched between switch and HBA

    Why it's wrong here

    Speed mismatch would show physical errors, not missing FLOGI.

About these practice questions

One of 984 original 350-601 practice questions on Courseiva, each with a full explanation and wrong-answer analysis — not exam dumps or protected exam content. Learn why practice questions differ from exam dumps →

How Courseiva writes practice questions · Editorial policy

JA

Written by Johnson Ajibi, MSc IT Security

Senior Network & Security Engineer · founder of Courseiva

This 350-601 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-601 exam.