- A
2:1
Why wrong: Incorrect calculation.
- B
5:1
Why wrong: Incorrect calculation.
- C
3:1
Correct: 480/160 = 3.
- D
4:1
Why wrong: Incorrect calculation.
Question 58 of 1,000
350-601 Network Practice Question
This 350-601 practice question tests your understanding of network. Read the scenario carefully and evaluate each option against the stated constraints before committing to an answer. After answering, compare your reasoning against the explanation and wrong-answer breakdown below. Once you have made your selection, read the full explanation to reinforce the concept and understand why each distractor is designed to mislead on exam day.
In a spine-leaf architecture with 40 leaf switches and 4 spine switches, each leaf has four 40G uplinks to the spines. What is the oversubscription ratio if each leaf has 48 ports of 10G for servers?
Answer choices
Why each option matters
Answer the question above first, then reveal the full breakdown to understand why each option is right or wrong.
Correct answer & explanation
✓
3:1
The oversubscription ratio is calculated by comparing total server bandwidth to total uplink bandwidth. Each leaf has 48 ports × 10G = 480G of server-facing bandwidth, and 4 uplinks × 40G = 160G of spine-facing bandwidth. The ratio is 480:160 = 3:1, meaning three times as much server bandwidth as uplink bandwidth, which is a common design target in Cisco ACI and NX-OS spine-leaf fabrics.
Key principle: Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Answer analysis
Option-by-option breakdown
For each option: why learners choose it and why it is or isn't the right answer here.
- ✗
2:1
Why it's wrong here
Incorrect calculation.
- ✗
5:1
Why it's wrong here
Incorrect calculation.
- ✓
3:1
Why this is correct
Correct: 480/160 = 3.
Related concept
Read the scenario before looking for a memorised answer.
- ✗
4:1
Why it's wrong here
Incorrect calculation.
Common exam traps
Common exam trap: answer the scenario, not the keyword
Cisco often tests the oversubscription ratio calculation by providing port counts and speeds, and the trap is that candidates mistakenly divide the total server bandwidth by the number of uplinks instead of the total uplink bandwidth, or they forget to multiply the number of uplinks by their speed.
Detailed technical explanation
How to think about this question
In Cisco ACI, the oversubscription ratio is a key design parameter that affects congestion and flow control. The 3:1 ratio is a Cisco-recommended starting point for balanced east-west traffic, but in practice, the ratio can be adjusted by changing the number or speed of uplinks (e.g., using 100G uplinks to achieve 1.2:1). The calculation assumes full-duplex links and no oversubscription on the spine side; the spine switches must have sufficient fabric capacity to handle the aggregate leaf uplink bandwidth.
KKey Concepts to Remember
- Read the scenario before looking for a memorised answer.
- Find the constraint that changes the correct option.
- Eliminate answers that are true in general but not in this case.
TExam Day Tips
- Watch for words such as best, first, most likely and least administrative effort.
- Review why wrong options are wrong, not only why the correct option is correct.
Key takeaway
Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option.
Real-world example
How this comes up in practice
A practitioner preparing for the 350-601 exam encounters this exact type of scenario on the job. The correct answer here is not the most general option — it is the best answer for the specific constraint described. Answer the scenario, not the keyword: identify the specific constraint before choosing the most familiar-sounding option. Real exam questions reward reading the full scenario before eliminating options, because the constraint defines which answer fits.
What to study next
Got this wrong? Here's your next step.
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
- →
Network — study guide chapter
Learn the concepts, then practise the questions
- →
Network practice questions
Targeted practice on this topic area only
- →
All 350-601 questions
1,000 questions across all exam domains
- →
Cisco DCCOR / CCNP Data Center Core 350-601 study guide
Full concept coverage aligned to exam objectives
- →
350-601 practice test guide
How to use practice tests most effectively before exam day
Related practice questions
Related 350-601 practice-question pages
Use these pages to review the topic behind this question. This is how one missed question becomes focused revision.
Security practice questions
Practise 350-601 questions linked to Security.
Network practice questions
Practise 350-601 questions linked to Network.
Storage Network practice questions
Practise 350-601 questions linked to Storage Network.
Automation practice questions
Practise 350-601 questions linked to Automation.
Compute practice questions
Practise 350-601 questions linked to Compute.
350-601 fundamentals practice questions
Practise 350-601 questions linked to 350-601 fundamentals.
350-601 scenario practice questions
Practise 350-601 questions linked to 350-601 scenario.
350-601 troubleshooting practice questions
Practise 350-601 questions linked to 350-601 troubleshooting.
Practice this exam
Start a free 350-601 practice session
Short sessions build daily habit. Longer sessions build exam-day stamina. Try a timed session to simulate real conditions.
FAQ
Questions learners often ask
What does this 350-601 question test?
Network — This question tests Network — Read the scenario before looking for a memorised answer..
What is the correct answer to this question?
The correct answer is: 3:1 — The oversubscription ratio is calculated by comparing total server bandwidth to total uplink bandwidth. Each leaf has 48 ports × 10G = 480G of server-facing bandwidth, and 4 uplinks × 40G = 160G of spine-facing bandwidth. The ratio is 480:160 = 3:1, meaning three times as much server bandwidth as uplink bandwidth, which is a common design target in Cisco ACI and NX-OS spine-leaf fabrics.
What should I do if I get this 350-601 question wrong?
Identify which exam domain this question belongs to, review the core concept, then practise similar questions from the same domain.
What is the key concept behind this question?
Read the scenario before looking for a memorised answer.
About these practice questions
Courseiva creates original exam-style practice questions with explanations and wrong-answer analysis. It does not publish real exam questions, exam dumps, or protected exam content. Learn why practice questions differ from exam dumps →
Keep practising
More 350-601 practice questions
- In Cisco ACI, which component is responsible for translating EPG communication policies into concrete configuration on l…
- An engineer is configuring OSPF on a Cisco Nexus switch in a data center. The network consists of multiple point-to-poin…
- An engineer is configuring BGP EVPN for VXLAN in a spine-leaf fabric. The leaf switches must advertise host IP-to-MAC ma…
- Which VLAN range is reserved by default on Cisco Nexus switches?
- In VXLAN overlay networks, which mechanism is used to forward broadcast, unknown unicast, and multicast (BUM) traffic wh…
- Which command is used to verify the OSPF neighbor state in NX-OS?
Last reviewed: Jul 4, 2026
This 350-601 practice question is part of Courseiva's free Cisco certification practice question bank. Courseiva provides original exam-style practice questions with explanations, topic-based practice, mock exams, readiness tracking, and study analytics to help learners prepare for the 350-601 exam.
Question Discussion
Share a tip, memory trick, or ask about the reasoning behind this question. Do not post real exam questions, leaked content, braindumps, or copyrighted exam material. Comments are moderated and may be removed without notice.
Sign in to join the discussion.